무료 배송: $ 99.00+ (송수신기 및 케이지) $ 600.00+ (기타 제품). 대량 구매 또는 맞춤 가격 문의는 직접 연락주시기 바랍니다.
도움이 필요하신가요?
우리와 실시간으로 채팅하세요
라이브 채팅
전화를 하시겠습니까?

+ 86-752-3386717

Korea · 한국어 · KRW
상호 참조

케이지 상호 참조

케이지 카테고리에서 OEM 케이지/커넥터 부품 번호 대체품을 찾아보세요. 호환되는 부품을 제공하는 브랜드만 나열됩니다.

모든 케이지를 살펴보세요 광섬유 케이지 및 커넥터 전체 카테고리.

OEM 부품 번호의 대체품이며, OEM 승인을 주장하는 것은 아닙니다.

상호 참조

Magjack 상호 참조

이 범주에 속하는 통합 RJ45 마그네틱 잭 부품 번호(P/N) 대체품은 견적을 내기 전에 확인하십시오.

Magjacks 제품 전체 보기 통합 RJ45 마그네틱 커넥터 카테고리.

OEM 부품 번호의 대체품이며, OEM 승인을 주장하는 것은 아닙니다.

상호 참조

LAN 변압기 상호 참조

이 범주에 속하는 개별 LAN 자기 부품 P/N 대체품. Bourns/기타 업체는 목록에 등재하기 전에 추가 증거가 필요합니다.

모든 LAN 자석 제품을 살펴보세요 LAN 변압기 및 필터 카테고리.

OEM 부품 번호의 대체품이며, OEM 승인을 주장하는 것은 아닙니다.

  • 신뢰할 수 있는 다양한 결제 옵션으로 귀하의 비즈니스에 주의를 기울이세요.

  • 배송 상태를 확인하려면 주문 번호 또는 추적 번호를 사용하세요.

  • 빠르게 견적을 받아보고 더욱 전문적인 서비스를 제공받으세요.

  • 예산과 지출을 더 잘 관리할 수 있도록 도와주세요.

  • 무료 샘플 지원으로 테스트 결과를 효율적으로 얻을 수 있습니다.

  • 전문적인 팀 지원 및 서비스로 귀하의 문제를 적시에 해결해 드립니다.

  • 궁금한 점이 있으면 무엇이든 물어보세요. 24시간 연중무휴 도와드리겠습니다.

  • 신속하게 견적을 받고 보다 전문적인 서비스를 제공하세요.

  • 기술 가이드, 업계 표준 및 SFP 호환성 관련 정보를 심층적으로 살펴보세요.

  • 자세한 제품 벤치마크 및 제품 간 비교 자료를 통해 적합한 모듈을 선택할 수 있도록 도와드립니다.

  • 데이터 센터, 기업 및 통신 네트워크를 위한 실제 연결 솔루션을 살펴보세요.

  • 데이터 전송 속도, 전송 거리 및 커넥터 유형 선택에 대한 필수 팁.

통화를 선택하십시오
USD-미국 달러
EUR - 유로
GBP - 영국 파운드
CAD - 캐나다 달러
AUD - 호주 달러
JPY - 일본 엔
SEK-스웨덴 크로나
NOK-노르웨이 크로네
IDR - 인도네시아 루피아
BRL-브라질 헤알
THB - 태국 바트
LP21FC01603 qsfp28 2x1 cage with emi spring finger light pipe

LP21FC01603 QSFP28 2x1 케이지(EMI 스프링 핑거 라이트 파이프 포함)

제품 개요

프로덕트
LP21FC01603 QSFP28 2x1 케이지(EMI 스프링 핑거 라이트 파이프 포함)
SKU
201943
P / N
LP21FC01603
가격
₩ 18
재고
130 재고
판매
1.8K
단가 $ 17.80
신규 사용자: $ 10.00 첫 주문 시 쿠폰 제공
암호 linkpp2610
주문 금액 초과 시 $ 1,000.00 돈을 받아가세요 $ 15.00 떨어져서
암호 Linkpp15
주문 금액 초과 시 $ 3,000.00 돈을 받아가세요 $ 50.00 떨어져서
암호 Linkpp50
주문 금액 초과 시 $ 5,000.00 돈을 받아가세요 $ 100.00 떨어져서
암호 Linkpp100
P / N : LP21FC01603SKU : 201943

LINK-PP 실물데이터시트3D 모델모든 다운로드

호환 가능 :
LINK-PP
Amphenol
호환 가능한 P/N:
LP21FC01603
볼륨 가격 온라인 구매 옵션 · 대량 구매 또는 맞춤 가격 문의
$ 17.800
1~9개
$ 16.910
10~99개
$ 16.020
100~999개
$ 15.130
1,000~2,499개
$ 14.240
≥2,500 PC

이 수량보다 더 많은 수량이 필요하시거나 가격 협상을 원하시나요?

주식 :
130 재고
배송:
$ 17.92
에 Korea 를 통해 페덱스 IP
예상 배달 시간 : 3 - 6 일.
5 - 년 보증 15- 일 반품 15일 교환
품질 보증
  • 업계 최고 수준의 5년 보증을 제공합니다.
  • 표를 읽어보세요 세부사항 논의 모든 제품의 보증.
반품 및 교환
  • 환불은 반품된 상품을 수령한 후 영업일 기준 약 5일 이내에 처리됩니다.
  • 재고가 있는 교체품은 영업일 기준 1일 이내에 배송 가능합니다.
  • 전체 반품 정책을 읽어보세요. 세부사항 논의.
무료 배송 $ 99.00.
또는 결제 시 UPS/FedEx/DHL 계정을 사용하여 배송할 수도 있습니다.$ 0.00 해운).
수량:
총 가격:
$ 17.80

LINK-PP LP21FC01603 QSFP28 2x1 케이지(EMI 스프링 핑거 라이트 파이프 포함)

LINK-PP 부품 번호 LP21FC01603 부품 상태 최근활동
제품 유형 케이지, 일체형(2 x 1) 폼 팩터 QSFP28
실장 형 스루홀, 직각 종료 압입
포트 매트릭스 구성 2x1 포트 포트 수 2
기능 EMI 차폐 PCB 장착 스타일 스루홀 - 압입
포함된 광파이프 가능 EMI 억제 기능 유형 EMI 스프링스
높이(인치/mm) 1.00/25.40 길이(인치/mm) 2.874/73.00
폭(인치/mm) 0.768/19.50 작동 온도 범위 -40 – 85 ° C

모델 비교표

LINK-PP

일치하는 제품

영화 신분증# 기술설명 가격 재고 장바구니에 담기

다운로드

제품 도면 LP21FC01603.pdf

질문과 답변

아직 질문이 없습니다.

제품 사양, 호환성 또는 납기일에 대해 가장 먼저 문의하세요.

질문하기
  • A:
    No. Press-fit is a mechanical step and has to come after reflow and after the wash, otherwise the cage traps paste and flux and the pins lose their interference fit. Our line order is reflow, wash, press, test, and the cage goes in on a flat anvil with the board supported underneath. If you press first, expect bent pins and a frame that will not sit flat. by LINK-PP 기술 지원
  • A:
    No, the light pipe is part of this cage and cannot be removed or added later, so front panel LED status comes with the frame. You only need to line the board LEDs up with the pipe entries before press-in. Check one assembled card under power: if a window stays dark while the port is linked, the pipe was not fully seated and the frame has to come out. by LINK-PP 기술 지원
  • A:
    The compliant section still engages on a 2.0mm board, but the anvil travel and the finished hole diameter both move, so treat it as a new press setting rather than a drop-in. Hold the plated hole to the drawing tolerance, then take the first article and heave on the two outer pins with 5kg of dead weight; if anything shifts, the setting is wrong. Send us your stackup and hole size and we will confirm against the drawing before you build. by LINK-PP 기술 지원
  • A:
    Yes. QSFP+, QSFP28 and QSFP-DD in the 1x footprint share the same cage opening and the same 73mm depth, so a 40G and a 100G module can sit side by side in this ganged frame. Two things to watch: the pull tab has to clear the 19.50mm width, and the 100G port runs hotter, so keep the 40G module in the slot with better airflow if the card is packed. by LINK-PP 기술 지원

고객 리뷰

  • 5

    리뷰 41 개

  • 5 별
    98%
    4 별
    2%
    3 별
    0%
    2 별
    0%
    1 스타
    0%
데이터가 없습니다
D *** t
Brazil
확인 된 구매
5.0
2026-11-07
Two ports in one frame means one insertion pass instead of two. With a ganged cage the press tool touches both ports at once, so the alignment on the faceplate is set by the frame, not by two independent insertions.
N *** a
Chile
확인 된 구매
4.0
2026-10-08
Four stars because the tray arrived with the two cages nested and no divider, so one had a bent spring finger we had to dress before use. Both ports still seated a module and passed the pull test.
M *** n
루마니아
확인 된 구매
5.0
2026-09-09
Right angle through hole press-fit is the only mounting this card could take. A solder version would have put reflow after the cage, which we cannot do because the board carries a paste stencil step that closes before the cage goes on. Press-fit let us build the card in the order the line already runs: reflow, wash, press, test. The trade is that hole tolerance becomes a process parameter, not a supplier promise.
C *** n
India
확인 된 구매
5.0
2026-08-10
Support the board under the frame during press-in, or the middle bows.
A *** g
Ireland
확인 된 구매
5.0
2026-07-12
73.00mm of length behind the faceplate is the number that decided our chassis depth. We had 80mm of clear space to the fan wall and the cage plus a straight cable bend needs 95mm, so the card went into the deeper slot =D
확인 된 구매
.0
상영 본문

By 

리뷰가 아직 없습니다.

이 제품 사용 경험을 가장 먼저 공유해 보세요.

리뷰 쓰기
|
판매