우리를 만나 우리의 사명, 신념, 봉사 등을 알아보세요.
우리의 위치를 찾아 우리와 긴밀하게 연결하십시오.
품질 관리, 테스트, 호환성 및 글로벌 규정 준수.
연구실 견학, 광학 테스트 베드, 호환성 도구 및 테스트 요청.
주변의 최신 뉴스와 이벤트를 알아보세요. l-p.com
기술 가이드, 업계 표준 및 SFP 호환성 관련 정보를 심층적으로 살펴보세요.
자세한 제품 벤치마크 및 제품 간 비교 자료를 통해 적합한 모듈을 선택할 수 있도록 도와드립니다.
데이터 센터, 기업 및 통신 네트워크를 위한 실제 연결 솔루션을 살펴보세요.
데이터 전송 속도, 전송 거리 및 커넥터 유형 선택에 대한 필수 팁.
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
The LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module cuts infrastructure costs by enabling bidirectional 2.5Gbps data transmission over single-mode fiber for up to 40km. It achieves this through dependable optical performance, employing a 1310nm transmit and 1550nm receive wavelength to deliver stable, high-efficiency connectivity.
| LINK-PP 부품 번호 | LS-BL31552G-40C | 공급 업체 이름 | LINK-PP |
| 폼 팩터 | SFP | 최대 데이터 속도 | 2.5Gbps |
| 파장 | 1310nm-TX/1550nm-RX | 최대 케이블 거리 | 40km |
| 커넥터 | 단순 LC | 미디어 | SMF |
| 송신기 유형 | DFB | 수신기 유형 |
PIN |
| TX 전력 | -2에서 + 4dBm | 수신 전원 | -23 ~ -1dBm |
| 수신기 감도 | <-20dBm | 수신기 과부하 | - 1dBm |
| 작동 온도 범위 | 0 ~ 70 ° C | 프로토콜 |
고속 이더넷, 기가비트 파이버 채널, MSA 규격 |
Designed for cost-efficient, long-distance networking, the LINK-PP LS-BL31552G-40C module supports 2.5Gbps full-duplex transmission over a single fiber up to 40 km. It features a hot-pluggable SFP design for quick installation and an integrated DOM for ongoing monitoring, helping maintain stable, manageable performance.
A high-performance DFB laser and PIN/TIA receiver are included with this LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module. The wavelength pair is properly matched for reliable bidirectional transmission with robust EMI resistance and low bit error rates over extended distances.
When reliable long-distance performance is needed, the LINK-PP LS-BL31552G-40C offers a practical and stable solution for 2.5Gbps connectivity across campus environments, telecom infrastructure, and enterprise networks.
By accurately pairing 1310nm transmit and 1550nm receive wavelengths, this LINK-PP LS-BL31552G-40C module ensures stable, low-interference transmission, supporting long-distance communication with excellent signal clarity and efficiency over single-mode fiber.
Built for extended reach, the LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module delivers up to 40km transmission over single-mode fiber with stable signal integrity, ideal for metro and backbone networks requiring reliable long-distance links.
The simplex LC interface allows both transmit and receive signals to operate through a single connector. This reduces fiber usage, simplifies cabling layouts, and lowers deployment and maintenance costs.
Equipped with Digital Optical Monitoring (DOM), the LINK-PP LS-BL31552G-40C module enables real-time monitoring of parameters such as temperature, voltage, transmit power, and receive power to promote proactive maintenance and accelerate fault diagnosis.
| 영화 | 신분증# | 기술설명 | 가격 | 재고 | 장바구니에 담기 |
Q: What SFF diagnostic standards are used for DDM readouts on this BiDi module, and can I read transmit power levels via SNMP? R***r 작성 on 2026-05-04
A: The module integrates Digital Diagnostics Monitoring (DDM/DOM) in full compliance with SFF-8472, enabling real-time monitoring of TX output power, RX input power, laser bias current, module supply voltage, and internal temperature via standard switch SNMP MIBs. 관리자 작성 on 2026-05-05
Q: Does the 40km distance rating require a minimum fiber optical attenuation or optical attenuator for short-distance testing on a bench? A***n 작성 on 2026-02-26
A: Yes, because the optical transmitter is calibrated for long-reach 40km spans, connecting this module directly on a short patch cable (e.g., under 5km) without an optical attenuator (typically 5dB to 10dB) may saturate or damage the sensitive optical receiver. 관리자 작성 on 2026-02-27
Q: How do I select the correct counter-part optical module to pair with this 1310nm-TX / 1550nm-RX BiDi transceiver on a single fiber strand? C***s에 의해 on 2025-01-17
A: To establish a functional link over a single fiber strand, the opposite end of the fiber link must use a complementary BiDi module that transmits at 1550nm and receives at 1310nm (1550nm-TX / 1310nm-RX 2.5G BiDi SFP 40km). 관리자 작성 on 2025-01-17
Q: Will this simplex LC BiDi module work with APC (Angled Physical Contact) polished fiber jumpers or only UPC/PC polished jumpers? By H***k on 2024-12-14
A: The optical interface uses a standard blue Simplex LC/UPC connector. For optimal optical return loss and minimal insertion loss, it should be connected to LC/UPC polished single-mode fiber patch cables rather than green LC/APC connectors. 관리자 작성 on 2024-12-14
Q: Can this 2.5G SFP BiDi transceiver auto-negotiate down to standard 1Gbps or 100Mbps speeds on legacy switch ports? E***s에 의해 on 2024-03-19
A: No, this module operates at a fixed data rate of 2.5Gbps (SONET OC-48 / 2.5G Ethernet). Both the switch port and the optic on the far end must support native 2.5G rate for the link to negotiate and establish connection. 관리자 작성 on 2024-03-20
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} 판매United States
반송파
비용, 배송 시간 추적
회사
비용 시간
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} 협상 예정 {{shipitem.datemin}}-{{shipitem.datemax}} 일 유효한