無料サンプルサポートにより、効率的にテスト結果を達成します。
専門チームのサポートとサービスが問題を時間内に解決します。
何でもお気軽にお問い合わせください。24時間7日対応いたします。
見積もりを迅速に取得し、よりプロフェッショナルなサービスを提供します。
私たちに会って、私たちの使命、信念、サービスなどを知ってください。
私たちの所在地を見つけて、私たちと密接につながりましょう。
品質管理、テスト、互換性、およびグローバルなコンプライアンス。
ラボ見学、光学試験設備、互換性ツール、および試験依頼。
最新のニュースやイベントを調べてください l-p.com
技術ガイド、業界標準、SFP 互換性に関する詳細情報を詳しくご覧ください。
詳細な製品ベンチマークと並べて比較することで、適切なモジュールを選択するのに役立ちます。
データ センター、企業、通信ネットワーク向けの実用的な接続ソリューションを探ります。
データ レート、伝送距離、コネクタ タイプの選択に関する重要なヒント。
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
その LINK-PP LS-BL31552G-40C 2.5G SFP BiDiモジュールは、最大40kmのシングルモード光ファイバー上で双方向2.5Gbpsデータ伝送を可能にすることで、インフラコストを削減します。1310nmの送信波長と1550nmの受信波長を採用することで、安定した高効率な接続を実現し、信頼性の高い光性能を提供します。
| LINK-PP 部品番号 | LS-BL31552G-40C | 業者名 | LINK-PP |
| フォームファクター | SFP | 最大データレート | 2.5Gbps |
| 波長 | 1310nm-TX/1550nm-RX | 最大ケーブル距離 | 40km |
| ボンジョイント | シンプレックスLC | メディアの方 | SMF |
| トランスミッタの種類 | DFB | レシーバータイプ |
PIN |
| TXパワー | -2〜 + 4dBm | RXパワー | -23〜-1dBm |
| レシーバ感度 | <-20dBm | レシーバの過負荷 | -1dBm |
| 動作温度範囲 | 0から70°C | プロトコル |
ファストイーサネット、ギガビットファイバーチャネル、MSA準拠 |
Designed for cost-efficient, long-distance networking, the LINK-PP LS-BL31552G-40C module supports 2.5Gbps full-duplex transmission over a single fiber up to 40 km. It features a hot-pluggable SFP design for quick installation and an integrated DOM for ongoing monitoring, helping maintain stable, manageable performance.
A high-performance DFB laser and PIN/TIA receiver are included with this LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module. The wavelength pair is properly matched for reliable bidirectional transmission with robust EMI resistance and low bit error rates over extended distances.
When reliable long-distance performance is needed, the LINK-PP LS-BL31552G-40C offers a practical and stable solution for 2.5Gbps connectivity across campus environments, telecom infrastructure, and enterprise networks.
By accurately pairing 1310nm transmit and 1550nm receive wavelengths, this LINK-PP LS-BL31552G-40C module ensures stable, low-interference transmission, supporting long-distance communication with excellent signal clarity and efficiency over single-mode fiber.
Built for extended reach, the LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module delivers up to 40km transmission over single-mode fiber with stable signal integrity, ideal for metro and backbone networks requiring reliable long-distance links.
The simplex LC interface allows both transmit and receive signals to operate through a single connector. This reduces fiber usage, simplifies cabling layouts, and lowers deployment and maintenance costs.
Equipped with Digital Optical Monitoring (DOM), the LINK-PP LS-BL31552G-40C module enables real-time monitoring of parameters such as temperature, voltage, transmit power, and receive power to promote proactive maintenance and accelerate fault diagnosis.
| ピクチャー | ID番号 | 詳細説明 | 価格 | ステージ0 | 商品をカートに追加 |
Q: What SFF diagnostic standards are used for DDM readouts on this BiDi module, and can I read transmit power levels via SNMP? R***r による on 2026-05-04
A: The module integrates Digital Diagnostics Monitoring (DDM/DOM) in full compliance with SFF-8472, enabling real-time monitoring of TX output power, RX input power, laser bias current, module supply voltage, and internal temperature via standard switch SNMP MIBs. 管理者による on 2026-05-05
Q: Does the 40km distance rating require a minimum fiber optical attenuation or optical attenuator for short-distance testing on a bench? A***nによる on 2026-02-26
A: Yes, because the optical transmitter is calibrated for long-reach 40km spans, connecting this module directly on a short patch cable (e.g., under 5km) without an optical attenuator (typically 5dB to 10dB) may saturate or damage the sensitive optical receiver. 管理者による on 2026-02-27
Q: How do I select the correct counter-part optical module to pair with this 1310nm-TX / 1550nm-RX BiDi transceiver on a single fiber strand? C***sによる on 2025-01-17
A: To establish a functional link over a single fiber strand, the opposite end of the fiber link must use a complementary BiDi module that transmits at 1550nm and receives at 1310nm (1550nm-TX / 1310nm-RX 2.5G BiDi SFP 40km). 管理者による on 2025-01-17
Q: Will this simplex LC BiDi module work with APC (Angled Physical Contact) polished fiber jumpers or only UPC/PC polished jumpers? By H***k on 2024-12-14
A: The optical interface uses a standard blue Simplex LC/UPC connector. For optimal optical return loss and minimal insertion loss, it should be connected to LC/UPC polished single-mode fiber patch cables rather than green LC/APC connectors. 管理者による on 2024-12-14
Q: Can this 2.5G SFP BiDi transceiver auto-negotiate down to standard 1Gbps or 100Mbps speeds on legacy switch ports? E***sによる on 2024-03-19
A: No, this module operates at a fixed data rate of 2.5Gbps (SONET OC-48 / 2.5G Ethernet). Both the switch port and the optic on the far end must support native 2.5G rate for the link to negotiate and establish connection. 管理者による on 2024-03-20
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} SOLD米国
キャリア
費用、配送時間、追跡
会社
コスト時間
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} 交渉中 {{shipitem.datemin}}-{{shipitem.datemax}} 日 利用できます