Can this module be connected directly to regular single-mode fiber that is already installed in our network?

Yes. The LS-CW491G-80C 1G CWDM SFP is designed for single-mode fiber (SMF) and uses duplex LC connectors. It can be connected to standard single-mode fiber infrastructure, provided the fiber condition, connector quality, splice loss, and total link loss are within the optical power budget.

We are building an 80km CWDM ring. Do both ends of the link need to use 1490nm modules?

Yes. For a standard point-to-point duplex CWDM link, both ends should use the same 1490nm CWDM wavelength and compatible 1G SFP modules. If the link is carried through CWDM MUX/DEMUX equipment, make sure both modules are connected to the corresponding 1490nm channel ports.

Can this LS-CW491G-80C module be used with a CWDM MUX/DEMUX system, or is it only for direct fiber links?

It can be used in both scenarios. For a direct point-to-point link, connect two compatible 1490nm modules over duplex single-mode fiber. For a CWDM multiplexed network, connect the module to the 1490nm port of a compatible CWDM MUX/DEMUX to combine multiple wavelengths onto the same fiber pair.

Breadcrumb: Casa; Prodotti; Ricetrasmettitori ottici | Moduli SFP; Moduli ricetrasmettitori 1/2/4G; SFP 1G CWDM/DWDM; 203282

Fare clic per aprire la vista espansa

LINK-PP LS-CW491G-80C Modulo ricetrasmettitore ottico 1G SFP CWDM 1490nm 80km Duplex LC DOM SMF

Name: LINK-PP LS-CW491G-80C Modulo ricetrasmettitore ottico 1G SFP CWDM 1490nm 80km Duplex LC DOM SMF
Brand: LINK-PP
SKU: 203282
Price: 43 USD
Availability: InStock
Rating: 4.9 (25 reviews)

# 203282

Prodotto: LINK-PP LS-CW491G-80C Modulo ricetrasmettitore ottico 1G SFP CWDM 1490nm 80km Duplex LC DOM SMF
SKU: 203282
P / N: LS-CW491G-80C
Prezzo: € 50
Di Serie: 98 in magazzino
Presto Disponibile: 812
URL del prodotto: https://www.l-p.com/products/492748.htm

Per ordini superiori a 1000 $, ricevi uno sconto di 15.00 $. , Codice: Linkpp15

Per ordini superiori a 3000 $, ricevi uno sconto di 50.00 $. , Codice: Linkpp50

Per ordini superiori a 5000 $, ricevi uno sconto di 100.00 $. , Codice: Linkpp100

Nuovi utenti: buono sconto di 10 $ per gli ordini. , Codice: linkpp2610

: LINK-PP LS-CW491G-80C Modulo ricetrasmettitore ottico 1G SFP CWDM 1490nm 80km Duplex LC DOM SMF

25 Recensioni Altre informazioni?

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.value }}
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Quantity

25 recensioni

3 Domande

Richiedi Stock

812 Presto Disponibile

$ 50

Spedizione gratuita per importi superiori a $ 600, se hai bisogno di un prezzo più favorevole, contattaci direttamente.

Qtà (pz):

Prezzo unitario :

$ 50

100

$ 47.5

1000

$ 46

3000

$ 44.5

6000

$ 43

Produzione: LINK-PP

P / N: LS-CW491G-80C

Compatibile:: Cisco; LINK-PP; Allied Telesis; Arista; Brocade; Ciena; Dell; Extreme; Juniper; Netgear

Lunghezza d'onda:: 1270nm; 1290nm; 1310nm; 1330nm; 1350nm; 1370nm; 1390nm; 1410nm; 1430nm; 1450nm; 1470nm; 1490nm; 1510nm; 1530nm; 1550nm; 1570nm; 1590nm; 1610nm

Spedizione

Essere negoziato

Spedizione Gratuita

Non posso consegnare

a Stati Uniti via {{now_chooseship?now_chooseship.name:''}}

Tempo di consegna stimato: {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} giorni; Guarda i dettagli

5 anni di garanzia Resi entro 30 giorni Scambio di 30 giorni

Image:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

Quantità:

( Ordine minimo {{detail_data.prodInfo.minimum_ordered_quantity}} )

non consegnabile

Prezzo Totale:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Aggiungi a desiderio

Specifiche

Specificazione
Video
Prodotti corrispondenti
Scaricare
Domande e risposte
Recensioni

LINK-PP Specifiche del modulo SFP LS-CW491G-80C da 1G

Progettato specificamente per le infrastrutture CWDM, il modulo SFP LS-CW491G-80C da 1G utilizza una lunghezza d'onda ottica di 1490 nm per massimizzare l'utilizzo della fibra su lunghe distanze. La combinazione di laser DFB e ricevitore PIN integrati garantisce un'integrità del segnale stabile su tratti di fibra monomodale fino a 80 km. Il monitoraggio ottico digitale (DOM) integrato fornisce il tracciamento in tempo reale della potenza ottica in uscita, della temperatura di esercizio, della corrente di polarizzazione e dei parametri di tensione.

LINK-PP Numero d'identificazione	LS-CW491G-80C	Nome fornitore	LINK-PP
Fattore di forma	SFP	Max Data Rate	1.25Gbps
Lunghezza d'onda	1490nm	Distanza massima del cavo	80km
Connettore	LC duplex	Media	SMF
Tipo di trasmettitore	DFB	Tipo di ricevitore	PIN
Potenza TX	Da -1 a + 4dBm	Potenza RX	Da -26 a -1dBm
Sensibilità del ricevitore	-26dBm	Ricevitore sovraccarico	-1dBm
EMC (Comunicazione elettromagnetica)	Supporto	DOM	Supporto
Intervallo operativo di temperatura	0 a 70 ° C	protocolli	SFP MSA、SFF-8472

Video

Prodotti corrispondenti

Immagini

ID #

Descrizione

Prezzo

Di Serie

Aggiungi al Carrello

Scaricare

Disegno del prodotto

PDF
LS-CWxx1G-80x.pdf

domande e risposte
Fai una domanda

Non ci sono dati

Q: Can this module be connected directly to regular single-mode fiber that is already installed in our network? Da I***t on 2026-02-03

A: Yes. The LS-CW491G-80C 1G CWDM SFP is designed for single-mode fiber (SMF) and uses duplex LC connectors. It can be connected to standard single-mode fiber infrastructure, provided the fiber condition, connector quality, splice loss, and total link loss are within the optical power budget. A cura dell'amministratore on 2026-02-04
Q: We are building an 80km CWDM ring. Do both ends of the link need to use 1490nm modules? Di H***n on 2025-11-17

A: Yes. For a standard point-to-point duplex CWDM link, both ends should use the same 1490nm CWDM wavelength and compatible 1G SFP modules. If the link is carried through CWDM MUX/DEMUX equipment, make sure both modules are connected to the corresponding 1490nm channel ports. A cura dell'amministratore on 2025-11-18
Q: Can this LS-CW491G-80C module be used with a CWDM MUX/DEMUX system, or is it only for direct fiber links? Di J***l on 2025-04-21

A: It can be used in both scenarios. For a direct point-to-point link, connect two compatible 1490nm modules over duplex single-mode fiber. For a CWDM multiplexed network, connect the module to the 1490nm port of a compatible CWDM MUX/DEMUX to combine multiple wavelengths onto the same fiber pair. A cura dell'amministratore on 2025-04-22

altro

Recensioni
Scrivi una recensione

{{stardata.star}}

{{comment.count}} Recensioni
5 stelle

{{comment.star5}}%

4 stelle

{{comment.star4}}%

3 stelle

{{comment.star3}}%

2 stelle

{{comment.star2}}%

1 stella

{{comment.star1}}%

tutte le Recensioni ({{comment.star_num?comment.star_num:comment.count}})

tutte le Recensioni

Solo 5 stelle

Solo 4 stelle

Solo 3 stelle

Solo 2 stelle

Solo 1 stella
Recensioni con immagini ( {{comment.pic_comment}} )
Vedi tutte le recensioni

Non ci sono dati

I *** e

Regno Unito

Acquisto verificato

5 .0

2026-06-14

Installed several LS-CW491G-80C modules in our CWDM ring — solid performance.

55 Voto utile Commenti

F *** z

Sud Africa

Acquisto verificato

5 .0

2026-06-02

We installed these CWDM modules as part of a phased data-center edge refresh. The sites do not need 10G on every route, but they do require resilient, monitored 1G connectivity across long single-mode fiber runs. The 1490nm CWDM channel allowed us to retain existing MUX/DEMUX hardware while adding capacity without trenching new fiber. From an operations standpoint, DOM is the biggest benefit. We set monitoring thresholds around receive optical power and watched the results through our normal device-management workflow. During burn-in and traffic testing, the optics remained stable and there were no link flaps. The compact SFP form factor also made replacement simple in populated switch racks. Great balance of reach, diagnostics, and cost.

95 Voto utile Commenti

N *** n

India

Acquisto verificato

5 .0

2026-05-11

We ordered these for a CWDM MUX/DEMUX upgrade where 1490nm was the open channel. The LS-CW491G-80C CWDM modules came online quickly and held a stable 1.25Gbps link. Nice option for enterprise fiber networks that still run 1G aggregation.

88 Voto utile Commenti

W *** s

Federazione Russa

Acquisto verificato

5 .0

2026-04-05

We deployed LS-CW491G-80C 1G 1490nm CWDM SFP transceivers across a multi-building industrial campus. The longest installed route was just under 67km after accounting for the patch-panel path, splices, and CWDM MUX/DEMUX insertion loss. The 80km optical budget gave us the operational headroom we wanted rather than designing right at the limit. During commissioning, we checked the DDM/DOM readings from each endpoint and compared the reported TX/RX values against our optical test results. The modules reported consistent information, and the links stayed free of packet loss and CRC alarms under production traffic. For indoor equipment rooms with 0 – 70°C conditions, this is a dependable 1490nm CWDM SFP for 1G backbone expansion.

137 Voto utile Commenti

Q *** s

Olanda

Acquisto verificato

5 .0

2026-03-21

The DOM information was available in our monitoring platform, including TX/RX optical power and temperature. That is important for us because the fiber route is long and troubleshooting time is expensive. Happy with the module so far.

101 Voto utile Commenti

T *** l

Italia

Acquisto verificato

5 .0

2026-02-16

We tested the module with multiple switch platforms in our lab before rolling it out. It was detected correctly, the link remained stable, and diagnostics were readable through the host interface. Good 1490nm CWDM optical module for the price.

100 Voto utile Commenti

G *** g

Giappone

Acquisto verificato

5 .0

2026-02-03

DOM readings are clean and stable; exactly what our NOC needed.

74 Voto utile Commenti

K *** t

Canada

Acquisto verificato

5 .0

2026-01-27

Great value for an 80km CWDM SFP with digital optical monitoring.

77 Voto utile Commenti

V t ***

Singapore

Acquisto verificato

5 .0

2025-12-18

Good alternative when you need a long-distance 1G CWDM SFP transceiver but do not want to redesign the entire optical network. We used it with Duplex LC single-mode fiber and a CWDM passive system. Traffic has been clean since installation.

115 Voto utile Commenti

M *** n

Brasile

Acquisto verificato

5 .0

2025-12-04

Used this 1490nm CWDM SFP module to extend a 1GbE connection between two municipal facilities. The Duplex LC SMF connection was straightforward, and the 80km rating gave us enough margin for the route. DOM values matched our field meter closely.

92 Voto utile Commenti

F *** h

Stati Uniti

Acquisto verificato

5 .0

2025-11-18

Reliable 1490nm 1G CWDM SFP for our 80km fiber path — linked right up.

61 Voto utile Commenti

I *** e

Nuova Zelanda

Acquisto verificato

4 .0

2025-11-02

The LS-CW491G-80C SFP modules worked perfectly on our 1490nm CWDM 1G links, and DOM readings were available as expected. One outer shipping carton arrived slightly compressed, although every SFP was individually protected and passed our incoming test. Product performance is five-star; shipping presentation could be a bit better.

29 Voto utile Commenti

Z *** n

Tailandia

Acquisto verificato

5 .0

2025-10-23

Our application was a 1GbE backhaul link between a central server room and several remote telecom cabinets connected through a CWDM transport layer. The LS-CW491G-80C was selected because we specifically needed a commercial-grade 1490nm CWDM SFP with an 80km reach, Duplex LC connector, and DOM support — not a generic 1310nm optic. The installation team used standard LC single-mode jumpers and kept end-face cleaning procedures in place. The links came up immediately after wavelength verification. Over several weeks, receive levels remained comfortably above the -26dBm receiver sensitivity threshold, and the reported optical readings did not drift. This is a strong choice for enterprise CWDM fiber infrastructure where 1.25Gbps capacity is still appropriate.

156 Voto utile Commenti

P *** r

Republic of Korea

Acquisto verificato

5 .0

2025-10-08

We needed a 1G 1490nm CWDM 80km SFP optical transceiver for an indoor data-room-to-cabinet link. It worked over existing single-mode fiber with LC patch cords and showed usable receive margin. Good procurement experience overall.

83 Voto utile Commenti

S *** t

Spagna

Acquisto verificato

5 .0

2025-09-02

This is a practical commercial-temperature 1G CWDM SFP for indoor telecom rooms. Optical levels stayed stable during normal load, and the PIN receiver sensitivity was sufficient for our long single-mode span. Would order again.

138 Voto utile Commenti

G *** s

Malaysia

Acquisto verificato

5 .0

2025-08-31

We bought this 1G 1490nm CWDM 80km SFP optical transceiver for a distributed video-surveillance and building-management network. Several remote locations share the same CWDM fiber infrastructure, so the exact wavelength and optical reach were non-negotiable. The LS-CW491G-80C matched the required 1490nm channel and provided enough transmitter power for our engineered path. Our field engineers verified the LC duplex polarity, cleaned every connector, and recorded baseline DOM data at turn-up. The RX levels were within the expected design range, and the modules maintained stable connectivity through regular traffic peaks. It is a commercial-temperature module, so we used it in conditioned indoor cabinets rather than exposed roadside enclosures. For that deployment profile, it has been reliable and easy to manage.

106 Voto utile Commenti

J *** e

Francia

Acquisto verificato

5 .0

2025-08-09

This 1.25G 1490nm CWDM SFP was recognized immediately and passed traffic overnight.

79 Voto utile Commenti

U n ***

Norvegia

Acquisto verificato

5 .0

2025-07-25

Bought a mixed wavelength batch for a regional fiber ring, including this 1490nm 80km SFP. All modules were clearly separated by wavelength, which avoided installation mistakes. The DFB CWDM transmitter delivered consistent levels at commissioning.

82 Voto utile Commenti

O *** s

Messico

Acquisto verificato

5 .0

2025-06-30

Purchased for a small batch of remote-site uplinks. The modules were properly labeled, seated well in standard SFP slots, and the DDM monitoring made acceptance testing much faster. No CRC errors after a week of traffic.

121 Voto utile Commenti

H *** n

Indonesia

Acquisto verificato

5 .0

2025-06-12

We evaluated this module for a mixed-vendor enterprise network where interoperability, documentation, and repeatability were more important than simply finding the lowest-cost optic. The LS-CW491G-80C CWDM SFP passed our lab checks for 1.25Gbps Ethernet transport, module recognition, and SFF-8472 digital diagnostics. We then rolled out a controlled batch to production locations. The 80km specification is valuable for long campus, metro-edge, and remote-site fiber routes, especially when CWDM channels are already allocated. The reported TX power range of -1 to +4dBm and receiver sensitivity down to -26dBm were aligned with our loss-budget calculations. After deployment, the modules have provided clean links and predictable DOM telemetry. That is exactly what we need for repeatable network maintenance.

119 Voto utile Commenti

R l ***

Svezia

Acquisto verificato

5 .0

2025-05-19

Our network team used these for a campus CWDM backbone migration instead of pulling additional fiber. The 1490nm channel fit our wavelength plan, and the 1.25G SFP interface kept the project compatible with existing aggregation hardware. Easy win.

92 Voto utile Commenti

H *** s

Germania

Acquisto verificato

5 .0

2025-04-22

Good fit for a Duplex LC single-mode fiber deployment, no drama.

52 Voto utile Commenti

J *** n

Belgio

Acquisto verificato

4 .0

2025-04-07

Technically, these 80km CWDM SFP modules are solid — stable link, correct wavelength, and no errors during our acceptance test. Delivery took a little longer than expected because our project schedule changed close to dispatch, but the packing and labeling were good. We would still purchase again for the next CWDM expansion.

33 Voto utile Commenti

X***y

Philippines

Acquisto verificato

5 .0

2025-02-28

This 1490nm 80km CWDM SFP was purchased for a regional access network where spare fiber was limited. We used a CWDM wavelength plan to carry several 1G services over one single-mode fiber pair, and this module occupied the 1490nm channel without interfering with the adjacent channels. The DFB transmitter and PIN receiver combination performed as expected over the measured loss budget. We also ran compatibility and monitoring checks before field deployment. The host recognized the module properly, and the SFF-8472 diagnostics gave the operations team useful TX power, RX power, voltage, temperature, and laser-bias visibility. For NOC teams, that visibility matters because it lets you spot degraded connectors or fiber loss before users report an outage.

128 Voto utile Commenti

L *** y

Australia

Acquisto verificato

5 .0

2025-01-15

Stable optical power and error-free operation on our long-haul campus link.

53 Voto utile Commenti