Our operations team wants to monitor a long 1470nm CWDM link before it becomes unstable. What diagnostic information can this LS-CW471G-80C module provide?

Its DOM function can report real-time module temperature, supply voltage, laser bias current, transmit optical power, and receive optical power. These values help identify fiber degradation, dirty connectors, weak received signal, and abnormal module temperature.

We currently use duplex fiber for point-to-point links. Can this 1470nm CWDM SFP help us expand capacity over the same fiber route later?

Yes. This module uses the 1470nm CWDM channel and can be deployed with other CWDM wavelengths through compatible CWDM multiplexers and demultiplexers. Each wavelength must be correctly paired at both ends and matched to the MUX/DEMUX channel plan.

For a large CWDM project, can we order a small sample batch before placing the full order?

Yes. A small sample order is a practical way to confirm compatibility before bulk deployment. It is especially useful when testing the modules with a new switch, a new CWDM MUX/DEMUX, or a long fiber link. You can verify 1470nm channel matching, DOM readings, and overall link performance before confirming the full order.

Our backbone is standard OS2 single-mode fiber with LC patch panels. Is this CWDM SFP module a direct fit, and what connector type should we use?

Yes. The LS-CW471G-80C is intended for single-mode fiber transmission and uses a duplex LC optical interface. Standard duplex LC-to-LC single-mode patch cords are normally used between the module and the fiber distribution panel.

Our CWDM plan includes 1470nm, 1490nm, 1510nm, and 1530nm channels on the same fiber pair. Can this module operate alongside the other wavelengths without interference?

Yes. The LS-CW471G-80C 1470nm SFP module is designed to operate as one CWDM channel in a multi-wavelength system. When the MUX/DEMUX channel plan is correct, each wavelength is isolated and can carry an independent optical link over the same single-mode fiber pair.

Breadcrumb: Casa; Prodotti; Ricetrasmettitori ottici | Moduli SFP; Moduli ricetrasmettitori 1/2/4G; SFP 1G CWDM/DWDM; 203258

Fare clic per aprire la vista espansa

LINK-PP LS-CW471G-80C Modulo ricetrasmettitore ottico 1G SFP CWDM 1470nm 80km Duplex LC DOM SMF

Name: LINK-PP LS-CW471G-80C Modulo ricetrasmettitore ottico 1G SFP CWDM 1470nm 80km Duplex LC DOM SMF
Brand: LINK-PP
SKU: 203258
Price: 43 USD
Availability: InStock
Rating: 4.9 (26 reviews)

# 203258

Prodotto: LINK-PP LS-CW471G-80C Modulo ricetrasmettitore ottico 1G SFP CWDM 1470nm 80km Duplex LC DOM SMF
SKU: 203258
P / N: LS-CW471G-80C
Prezzo: € 50
Di Serie: 110 in magazzino
Presto Disponibile: 890
URL del prodotto: https://www.l-p.com/products/492724.htm

Per ordini superiori a 1000 $, ricevi uno sconto di 15.00 $. , Codice: Linkpp15

Per ordini superiori a 3000 $, ricevi uno sconto di 50.00 $. , Codice: Linkpp50

Per ordini superiori a 5000 $, ricevi uno sconto di 100.00 $. , Codice: Linkpp100

Nuovi utenti: buono sconto di 10 $ per gli ordini. , Codice: linkpp2610

: LINK-PP LS-CW471G-80C Modulo ricetrasmettitore ottico 1G SFP CWDM 1470nm 80km Duplex LC DOM SMF

26 Recensioni Altre informazioni?

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.value }}
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Quantity

26 recensioni

5 Domande

Richiedi Stock

890 Presto Disponibile

$ 50

Spedizione gratuita per importi superiori a $ 600, se hai bisogno di un prezzo più favorevole, contattaci direttamente.

Qtà (pz):

Prezzo unitario :

$ 50

100

$ 47.5

1000

$ 46

3000

$ 44.5

6000

$ 43

Produzione: LINK-PP

P / N: LS-CW471G-80C

Compatibile:: Cisco; LINK-PP; Allied Telesis; Arista; Brocade; Ciena; Dell; Extreme; Juniper; Netgear

Lunghezza d'onda:: 1270nm; 1290nm; 1310nm; 1330nm; 1350nm; 1370nm; 1390nm; 1410nm; 1430nm; 1450nm; 1470nm; 1490nm; 1510nm; 1530nm; 1550nm; 1570nm; 1590nm; 1610nm

Spedizione

Essere negoziato

Spedizione Gratuita

Non posso consegnare

a Stati Uniti via {{now_chooseship?now_chooseship.name:''}}

Tempo di consegna stimato: {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} giorni; Guarda i dettagli

5 anni di garanzia Resi entro 30 giorni Scambio di 30 giorni

Image:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

Quantità:

( Ordine minimo {{detail_data.prodInfo.minimum_ordered_quantity}} )

non consegnabile

Prezzo Totale:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Aggiungi a desiderio

Specifiche

Specificazione
Video
Prodotti corrispondenti
Scaricare
Domande e risposte
Recensioni

LINK-PP Specifiche del modulo SFP LS-CW471G-80C da 1G

Il modulo LS-CW471G-80C funziona come un modulo SFP CWDM a 1470 nm, combinando un laser DFB con un fotodiodo PIN per consentire la trasmissione su fibra monomodale fino a 80 km. Il suo sistema di monitoraggio ottico digitale in tempo reale riporta continuamente potenza di trasmissione, potenza di ricezione, temperatura, tensione e corrente di polarizzazione con precisione integrata. Il filtraggio specifico per lunghezza d'onda e il budget di perdita calibrato del modulo garantiscono margini di collegamento costanti sull'intera griglia CWDM senza necessità di equalizzazione esterna.

LINK-PP Numero d'identificazione	LS-CW471G-80C	Nome fornitore	LINK-PP
Fattore di forma	SFP	Max Data Rate	1.25Gbps
Lunghezza d'onda	1470nm	Distanza massima del cavo	80km
Connettore	LC duplex	Media	SMF
Tipo di trasmettitore	DFB	Tipo di ricevitore	PIN
Potenza TX	Da -1 a + 4dBm	Potenza RX	Da -26 a -1dBm
Sensibilità del ricevitore	-26dBm	Ricevitore sovraccarico	-1dBm
EMC (Comunicazione elettromagnetica)	Supporto	DOM	Supporto
Intervallo operativo di temperatura	0 a 70 ° C	protocolli	SFP MSA、SFF-8472

Video

Prodotti corrispondenti

Immagini

ID #

Descrizione

Prezzo

Di Serie

Aggiungi al Carrello

Scaricare

Disegno del prodotto

PDF
LS-CWxx1G-80x.pdf

domande e risposte
Fai una domanda

Non ci sono dati

Q: Our operations team wants to monitor a long 1470nm CWDM link before it becomes unstable. What diagnostic information can this LS-CW471G-80C module provide? Di K***m on 2026-04-18

A: Its DOM function can report real-time module temperature, supply voltage, laser bias current, transmit optical power, and receive optical power. These values help identify fiber degradation, dirty connectors, weak received signal, and abnormal module temperature. A cura dell'amministratore on 2026-04-19
Q: We currently use duplex fiber for point-to-point links. Can this 1470nm CWDM SFP help us expand capacity over the same fiber route later? Di M***n on 2026-01-26

A: Yes. This module uses the 1470nm CWDM channel and can be deployed with other CWDM wavelengths through compatible CWDM multiplexers and demultiplexers. Each wavelength must be correctly paired at both ends and matched to the MUX/DEMUX channel plan. A cura dell'amministratore on 2026-01-27
Q: For a large CWDM project, can we order a small sample batch before placing the full order? By O***p on 2025-12-03

A: Yes. A small sample order is a practical way to confirm compatibility before bulk deployment. It is especially useful when testing the modules with a new switch, a new CWDM MUX/DEMUX, or a long fiber link. You can verify 1470nm channel matching, DOM readings, and overall link performance before confirming the full order. A cura dell'amministratore on 2025-12-04
Q: Our backbone is standard OS2 single-mode fiber with LC patch panels. Is this CWDM SFP module a direct fit, and what connector type should we use? Di L***s on 2025-08-09

A: Yes. The LS-CW471G-80C is intended for single-mode fiber transmission and uses a duplex LC optical interface. Standard duplex LC-to-LC single-mode patch cords are normally used between the module and the fiber distribution panel. A cura dell'amministratore on 2025-08-10
Q: Our CWDM plan includes 1470nm, 1490nm, 1510nm, and 1530nm channels on the same fiber pair. Can this module operate alongside the other wavelengths without interference? Di N***e on 2025-01-14

A: Yes. The LS-CW471G-80C 1470nm SFP module is designed to operate as one CWDM channel in a multi-wavelength system. When the MUX/DEMUX channel plan is correct, each wavelength is isolated and can carry an independent optical link over the same single-mode fiber pair. A cura dell'amministratore on 2025-01-15

altro

Recensioni
Scrivi una recensione

{{stardata.star}}

{{comment.count}} Recensioni
5 stelle

{{comment.star5}}%

4 stelle

{{comment.star4}}%

3 stelle

{{comment.star3}}%

2 stelle

{{comment.star2}}%

1 stella

{{comment.star1}}%

tutte le Recensioni ({{comment.star_num?comment.star_num:comment.count}})

tutte le Recensioni

Solo 5 stelle

Solo 4 stelle

Solo 3 stelle

Solo 2 stelle

Solo 1 stella
Recensioni con immagini ( {{comment.pic_comment}} )
Vedi tutte le recensioni

Non ci sono dati

E *** r

Emirati Arabi Uniti

Acquisto verificato

5 .0

2026-06-21

Our colocation team used the LS-CW471G-80C in a 1G CWDM transport shelf connecting two metropolitan facilities. We chose the 1470nm wavelength specifically to fill an available channel rather than deploy another fiber pair. Installation was uncomplicated: insert the SFP, connect Duplex LC single-mode fiber through the CWDM MUX/DEMUX, verify wavelength mapping, and review DOM status. The DFB CWDM transmitter and PIN receiver performed as expected, with no unusual laser-temperature behavior during the acceptance test. It is not a substitute for an industrial -40 to 85°C module in exposed outdoor cabinets, but for climate-controlled data rooms it has delivered stable service at a sensible cost.

110 Voto utile Commenti

X *** r

Cambogia

Acquisto verificato

5 .0

2026-05-18

Used a pair for a long-distance point-to-point connection between a warehouse and a central office. The DFB laser output is strong enough for our loss budget, while the PIN receiver is sensitive enough to keep the connection dependable.

135 Voto utile Commenti

R n ***

Israele

Acquisto verificato

5 .0

2026-04-29

We used this LS-CW471G-80C SFP module to extend a 1G CWDM connection between two office campuses. The 1470nm channel matched our existing CWDM plan, and the Duplex LC single-mode patching was straightforward. The link has stayed stable since installation.

160 Voto utile Commenti

C *** n

Marocco

Acquisto verificato

5 .0

2026-03-14

Our data room has limited fiber count, so CWDM is the practical answer. This 1470nm SFP works with our single-mode fiber and passive multiplexing hardware, keeping the old 1G transport system useful without a major rebuild.

154 Voto utile Commenti

L *** g

Polonia

Acquisto verificato

5 .0

2026-03-04

Solid 80km 1G CWDM SFP for our metro fiber path.

80 Voto utile Commenti

O *** s

Ucraina

Acquisto verificato

5 .0

2026-02-24

Installed in minutes and the 1.25G port came straight up.

70 Voto utile Commenti

F *** n

Nepal

Acquisto verificato

5 .0

2026-02-10

Our operations team used this 1.25G CWDM 1470nm SFP for a long-distance Fiber Channel network where we still maintain Gigabit uplinks. We checked optical power at commissioning, then compared it with the module’s DDM data from the switch CLI. The readings were close enough to trust the diagnostics for routine remote checks. That has reduced truck rolls because we can see whether a declining optical level is likely a fiber issue, dirty connector, or equipment-side problem. For commercial indoor cabinets, the 0–70°C rating is appropriate, and the Duplex LC connection made replacement easy for field technicians.

92 Voto utile Commenti

U***z

Bulgaria

Acquisto verificato

5 .0

2026-01-18

Our purchasing team wanted a cost-conscious replacement for the legacy 1G CWDM optical transceiver. These arrived properly labeled by wavelength, which helped prevent channel mix-ups during rack deployment. The 1470nm CWDM channel has been stable so far.

141 Voto utile Commenti

P *** n

Turchia

Acquisto verificato

5 .0

2025-12-30

Good optical budget for a long single-mode fiber run.

127 Voto utile Commenti

H *** e

Bangladesh

Acquisto verificato

5 .0

2025-12-12

We purchased these CWDM 1G SFP modules for a multi-site enterprise rollout with several types of network equipment in the environment. Before deployment, we performed compatibility checks, port resets, DOM polling, and extended traffic tests on each OEM-coded batch. All tested modules established 1Gbps links cleanly and maintained stable monitoring data under normal operating temperature. The SFP MSA mechanical format and SFF-8472 diagnostics are especially useful for organizations keeping a mixed estate of older access, aggregation, and transport equipment. The 80km specification provides planning flexibility, although we still recommend validating the complete optical loss budget rather than treating distance alone as the decision point.

146 Voto utile Commenti

K *** t

Austria

Acquisto verificato

5 .0

2025-11-28

Linked at 1470nm right away and DOM readings look clean.

104 Voto utile Commenti

G *** h

Libia

Acquisto verificato

5 .0

2025-11-05

Good choice for extending legacy Gigabit Ethernet over an existing 1470nm CWDM channel. The 80km reach gives us useful headroom compared with shorter-reach optics. No link flaps after three weeks of continuous use.

102 Voto utile Commenti

T *** s

Danmark

Acquisto verificato

5 .0

2025-10-15

This is a good fit when you need an 80km CWDM SFP optical transceiver without moving to a higher-speed platform. We are using it over single-mode fiber on a long rural site connection. Receive power remains comfortably within range.

75 Voto utile Commenti

F *** d

Argentina

Acquisto verificato

5 .0

2025-10-01

We used these modules during a legacy network modernization where the customer wanted to preserve its 1Gbps CWDM infrastructure while expanding monitoring capability. The old optics had no diagnostics, making it difficult to distinguish attenuation events from port failures. With this 1470nm 80km CWDM SFP, we can watch temperature, voltage, bias, transmit power, and receive power from the network management system. The optical performance has been consistent over a 61km path, and the LC duplex format works directly with the customer’s existing single-mode patching. For phased upgrades of enterprise, municipal, or telecom access networks, that is a meaningful operational improvement.

130 Voto utile Commenti

Z l ***

macao

Acquisto verificato

5 .0

2025-09-26

We added this 1470nm SFP module to our 8-channel passive CWDM multiplexer. The duplex LC interface clicked firmly into our patch panel, and optical loss was well within our calculated margins. Smooth deployment all around.

57 Voto utile Commenti

Mio

Finlandia

Acquisto verificato

5 .0

2025-09-17

Duplex LC fit was perfect — no surprises.

112 Voto utile Commenti

V *** s

Bielorussia

Acquisto verificato

5 .0

2025-08-21

Installed in an indoor aggregation switch for a campus fiber network. The module negotiated cleanly at 1Gbps, and the SFF-8472 DOM information appears correctly in the monitoring tool. No CRC errors after the burn-in period.

118 Voto utile Commenti

Q *** t

Irlanda

Acquisto verificato

5 .0

2025-07-11

DOM data is available and useful for remote troubleshooting.

53 Voto utile Commenti

Maldive

Acquisto verificato

5 .0

2025-07-02

We deployed LS-CW471G-80C CWDM SFP modules across a regional campus and utility-monitoring network where the longest route was just under 76km. The plant is single-mode fiber with patch panels, splice closures, and a passive CWDM MUX/DEMUX chain, so actual insertion loss matters more than a simple bench test. The 1470nm channel aligned correctly with our wavelength plan, and the modules consistently reported healthy DOM values. TX power stayed in the specified -1 to +4dBm range, while RX readings remained above the -26dBm sensitivity threshold with reasonable margin. After several weeks, interface counters show no packet loss or CRC accumulation.

123 Voto utile Commenti

W *** n

Brunei Darussalam

Acquisto verificato

5 .0

2025-06-04

We needed a 1470nm 80km CWDM SFP with LC connectors for an existing passive CWDM MUX/DEMUX system. This unit matched the channel and fiber type exactly. Nice plug-and-play experience.

85 Voto utile Commenti

D *** r

Iran, Islamic Republic of

Acquisto verificato

5 .0

2025-05-27

We installed a matched 1470nm CWDM optic pair on a 74km single-mode fiber route used for industrial telemetry and remote site management. The route includes multiple cross-connects and an existing CWDM passive filter system, so we cleaned every LC end face and documented baseline receive power during turn-up. The link came up immediately, and the receive levels held stable through normal day-to-night temperature changes. The DOM function lets us establish alarm thresholds before the signal approaches the receiver sensitivity limit. For network operations teams maintaining long-haul Gigabit fiber links, that visibility is more valuable than a basic non-DDM optic. ^_^

78 Voto utile Commenti

N *** s

Romania

Acquisto verificato

5 .0

2025-05-03

Reliable 1470nm CWDM SFP transceiver, stable link, good value.

149 Voto utile Commenti

Y n ***

Lituania

Acquisto verificato

5 .0

2025-04-16

The form factor is standard SFP, the interface is duplex LC, and the module runs normally in a commercial server-room environment. For indoor 0 – 70°C deployments, it has been a dependable 1G CWDM transceiver option.

64 Voto utile Commenti

H *** h

Giappone

Acquisto verificato

4 .0

2025-03-19

Great 1G CWDM module for our indoor single-mode fiber deployment; the link is stable and compatibility testing went smoothly. Delivery took a little longer than our project schedule expected, so order early for a time-sensitive rollout. Product performance is absolutely fine once installed.

35 Voto utile Commenti

*** S d

Ungheria

Acquisto verificato

5 .0

2025-03-08

Bought several 1G 1470nm CWDM SFP modules for a small carrier backhaul upgrade. All units were recognized quickly, and the DDM values gave our NOC a simple way to verify TX power, RX power, temperature, and voltage. Very practical for fieldwork.

98 Voto utile Commenti

G *** e

Stati Uniti

Acquisto verificato

4 .0

2025-01-22

The 1470nm 80km CWDM SFP itself performs well and the DOM readings are accurate enough for routine checks. One carton arrived with a slightly crushed outer corner, although the antistatic packaging protected every module and none were damaged. I would buy again, but stronger bulk carton padding would be welcome.

28 Voto utile Commenti