Bebas biaya kirim: IDR 1,792,841+ (transceiver & sangkar), IDR 10,865,700+ (produk lainnya). Untuk jumlah yang lebih besar atau harga khusus, hubungi kami langsung.
Butuh Bantuan?
Ngobrol langsung dengan kami
Live chat
Ingin menelepon?

Telepon: + 86-752-3386717

Indonesia · Indonesian · IDR
  • Jalankan bisnis Anda dengan berbagai pilihan pembayaran yang tepercaya.

  • Gunakan nomor pesanan atau nomor pelacakan untuk memeriksa status pengiriman.

  • Dapatkan penawaran harga Anda dengan cepat dan tawarkan layanan yang lebih profesional.

  • Bantu kelola anggaran & pengeluaran Anda dengan lebih baik.

  • Dukungan sampel gratis, capai hasil pengujian Anda secara efisien.

  • Dukungan dan layanan tim profesional, untuk menyelesaikan masalah Anda tepat waktu.

  • Tanyakan apa pun yang Anda khawatirkan, kami akan membantu Anda 24/7.

  • Dapatkan penawaran Anda dengan cepat dan tawarkan layanan yang lebih profesional.

  • Temui kami dan ketahui misi, keyakinan, layanan, dan banyak lagi.

  • Temukan lokasi kami dan terhubunglah dengan kami secara dekat.

  • Manajemen mutu, pengujian, kompatibilitas, dan kepatuhan global.

  • Temukan berita dan acara terbaru di sekitar l-p.com

  • Telusuri secara mendalam panduan teknis, standar industri, dan wawasan kompatibilitas SFP.

  • Tolok ukur produk terperinci dan perbandingan berdampingan untuk membantu Anda memilih modul yang tepat.

  • Jelajahi solusi konektivitas dunia nyata untuk pusat data, perusahaan, dan jaringan telekomunikasi.

  • Tips penting dalam memilih kecepatan data, jarak transmisi, dan jenis konektor.

Pilih Mata Uang
USD - Dolar AS
EUR - Euro
GBP - Pound Inggris
CAD - Dolar Kanada
AUD - Dolar Australia
JPY - Yen Jepang
SEK - Krona Swedia
NOK - Krone Norwegia
IDR - Rupiah Indonesia
BRL - Real Brasil
THB - Baht Thailand
LPJE4717-2DNL smt rj45 jack ultra low profile mid mounting 8.50mm above pcb without led without integrated magnetics
Klik untuk membuka tampilan yang diperluas

LPJE4717-2DNL SMT RJ45 Jack Profil Sangat Rendah Pemasangan Tengah 8.50mm Di Atas PCB Tanpa LED Tanpa Magnet Terintegrasi

Ringkasan Produk

Produk
LPJE4717-2DNL SMT RJ45 Jack Profil Sangat Rendah Pemasangan Tengah 8.50mm Di Atas PCB Tanpa LED Tanpa Magnet Terintegrasi
SKU
175793
P / N
LPJE4717-2DNL
Harga
IDR 10,685
saham
839 dalam Stok
Terjual
3.4K
Patokan harga IDR 10685
Pengguna baru: IDR 181,095 Kupon untuk Pesanan Pertama Anda
Kode linkpp2610
Untuk Pemesanan Lebih dari IDR 18,109,500 Dapatkan IDR 271,643 Off
Kode Linkpp15
Untuk Pemesanan Lebih dari IDR 54,328,500 Dapatkan IDR 905,475 Off
Kode Linkpp50
Untuk Pemesanan Lebih dari IDR 90,547,500 Dapatkan IDR 1,810,950 Off
Kode Linkpp100
P / N: LPJE4717-2DNLSKU: 175793

LINK-PP Garis Keturunan AsliDatasheetsemua download

Kompatibel:
LINK-PP
P/N yang kompatibel:
LPJE4717-2DNL
Harga volume Tingkat pemesanan online · jumlah lebih besar atau harga khusus berdasarkan permintaan
IDR 10685
1–99 buah
IDR 10685
100–999 buah
IDR 9616
1,000–4,999 buah
IDR 9290
5,000–9,999 buah
IDR 9091
10,000–14,999 buah
IDR 8765
15,000 buah

Butuh jumlah lebih dari yang tertera di sini, atau ingin menegosiasikan harga?

Stock:
839 dalam Stok
Pengiriman:
IDR 605,038
untuk Indonesia melalui IP FedEx
Perkiraan waktu pengiriman: 3 - 6 hari.
5-Tahun Garansi Pengembalian 15-Hari Penukaran 15 Hari
Jaminan
  • Memberikan garansi 5 tahun yang terdepan di industri.
  • Bacalah tabel berikut ini: details garansi semua produk.
Pengembalian & Penukaran
  • Pengembalian dana akan diterima sekitar 5 hari kerja setelah barang yang dikembalikan diterima.
  • Barang yang tersedia untuk penggantian dapat dikirim dalam waktu 1 hari kerja.
  • Baca kebijakan pengembalian selengkapnya untuk details.
Gratis ongkos kirim di atas IDR 10,865,700.
Atau kirim menggunakan akun UPS / FedEx / DHL Anda sendiri saat pembayaran (IDR 0 pengiriman).
Jumlah:
SPQ 100
Total harga:
IDR 10685
Rincian kemasan
pcs 100
pcs 3000
Baki
54.5 × 28.5 × 27 cm
0.004 kg
13.1 kg

LINK-PP LPJE4717-2DNL SMT RJ45 Jack Ultra Low Profile Mid Mounting 8.50mm Above PCB Without Integrated Magnetics (Tab Up, Without LED)

LINK-PP Part Number LPJE4717-2DNL Konektor Jenis Jack
Status Bagian Aktif Mounting Type melalui Lubang
Jumlah Posisi/Kontak 8p8c (RJ45, Ethernet) Aplikasi-Lan -
Jumlah Ports Pelabuhan 1x1 Kecepatan -
Memalangi Up Inti per Port -
Orientasi Sudut 90° (Kanan) Sudut Pemasangan PCB MASUK SAMPING
Tab EMI Perisai Dengan Opsi LED Tanpa LED
PCB FR4 Tiang Penahan PCB POSTINGAN T
Tinggi Paket (Inci/mm) 0.443/11.25 Panjang Paket (Inci/mm) 0.559/14.20
Lebar Paket (Inci/mm) 0.642/16.30 Suhu -40℃ SAMPAI 85℃
Sirkuit Bst Ya AutomDX YES
Dioda Tidak Plating Area Perkawinan Kontak EMAS 6u"/15u"/30u"
Rasio Putaran RX/TX 1KTA:1KTA Konfigurasi RX/TX T, C

LINK-PP

Produk yang Cocok

Film ID # Deskripsi Harga saham Yuk, Beli !

Unduh

Gambar Produk LPJE4717-2DNL [PCB Mid Profil Rendah].pdf

pertanyaan

Belum ada pertanyaan

Jadilah orang pertama yang bertanya tentang spesifikasi, kompatibilitas, atau waktu tunggu.

Ajukan Pertanyaan
  • A:
    Barely, and I would not design to that. The 8.5mm is measured from the PCB surface to the top of the housing, so with a 10mm internal height you have 1.5mm total, minus the lid gap and any gasket. A plug body itself is 11.5mm wide but only about 6mm tall, so the plug clears, however the release tab needs finger access. I would go to an 11mm internal height or use a slim boot with a pull loop. by LINK-PP Dukungan teknis
  • A:
    We rate it at 750 cycles, which is lower than a standard height jack at 1000 because there is less material around the latch pivot. In our test at 300 cycles the retention only dropped from 10.5N to 8.4N, so there is margin. The latch spring is a separate stainless piece rather than molded plastic, which is why it does not fatigue the way cheap low profile parts do. Above 500 cycles I would specify the 15 micro inch gold option. by LINK-PP Dukungan teknis
  • A:
    Not at exactly 8.5mm. The closest is LPJE4718-2DNL at 10.2mm with magnetics, which is still very low but needs a slightly deeper pocket. We cannot fit a transformer plus a shield into an 8.5mm body without changing the winding to a smaller core, and that would hurt the insertion loss at 100 MHz. If your depth budget is fixed, keep this part and put the transformer on the back side of the board, which is what most of our customers do. by LINK-PP Dukungan teknis
  • A:
    Yes for most boots, but check the boot length. The front lip on this part is 2.4mm above the PCB, so a boot longer than 32mm will hit the housing before the plug fully seats. Standard 28mm boots are fine, and the slim 25mm boots are ideal. The bigger constraint is the release tab, at 8.5mm height you need to be able to get a finger in, so leave at least 25mm of clear space above the board. by LINK-PP Dukungan teknis
  • A:
    Hold the pocket depth within plus or minus 0.1mm and the side clearance within 0.15mm. If you are 0.2mm too shallow the body will not seat and the tails will stand off the pad, which shows up as intermittent links after thermal cycling. If it is 0.2mm too deep the housing floats and the latch height changes, so plugs feel loose. Route the pocket before drilling the tail holes, not after, that is how most of the tolerance stack errors happen. by LINK-PP Dukungan teknis

Testimoni Pelanggan

  • 5

    21 Ulasan

  • 5 bintang
    95%
    4 bintang
    5%
    3 bintang
    0%
    2 bintang
    0%
    1 bintang
    0%
  • Semua Ulasan (21)
Tidak ada data
T *** n
Swedia
Pembelian Terverifikasi
4.0
2026-10-19
Fits our slim case, which is the whole point, but the tray arrived with the lid off and three units had a bent EMI tab. Straightened and used them, they work, just pack it better.
P *** o
Kolumbia
Pembelian Terverifikasi
5.0
2026-10-09
Field data after 8 months on 80 units in a wall mounted panel: zero connector failures, no loose plugs, no cracked bodies. Ambient inside the panel reaches 58℃ in summer and the part is rated to 85℃, so we have margin. Contact resistance on 10 pulled units measured 11 to 16 mΩ, basically unchanged from incoming inspection.
S *** m
Belanda
Pembelian Terverifikasi
5.0
2026-09-19
Bought these for a digital signage product where the enclosure depth is the whole design constraint. Compared with using a right angle jack and a short patch cable, this saved 9mm of depth and one connector from the BOM. Over 150 units the cost was 41 cents lower per unit and assembly dropped 18 seconds. The tradeoff is the PCB cutout, which added 6 seconds of routing time.
K *** o
Spanyol
Pembelian Terverifikasi
5.0
2026-08-14
Reflow at 245℃ peak, 300 boards. The low profile body is thin, so I expected warping at the mid mount tabs. Measured 0.08mm deviation, better than the taller parts we use. Voiding on the tails was under 7% on X-ray. The only rework we had was two units where a tail lifted, both from a paste deposit issue on our side, not the part.
J *** n
Belgia
Pembelian Terverifikasi
5.0
2026-06-14
Tested at 100 Mbps and 1G with 100m Cat5e for 48 hours. No CRC errors. Without magnetics the jack is basically a passive part, so what matters is contact resistance and crosstalk: 9 mΩ average contact resistance, -43 dB near end crosstalk at 100 MHz. Both fine. We put a discrete transformer 15mm behind it and the layout is clean.
Pembelian Terverifikasi
.0
Menampilkan komentar

By 

Belum ada ulasan

Jadilah orang pertama yang berbagi pengalaman Anda dengan produk ini.

Tulis Ulasan
|
Terjual