Bebas biaya kirim: IDR 1,791,369+ (transceiver & sangkar), IDR 10,856,784+ (produk lainnya). Untuk jumlah yang lebih besar atau harga khusus, hubungi kami langsung.
Butuh Bantuan?
Ngobrol langsung dengan kami
Live chat
Ingin menelepon?

Telepon: + 86-752-3386717

Indonesia · Indonesian · IDR
Referensi silang

Referensi Silang Sangkar

Alternatif nomor komponen (P/N) sangkar/konektor OEM dalam kategori sangkar. Hanya merek dengan suku cadang yang cocok yang tercantum.

Lihat semua kandang Kategori sangkar dan konektor serat optik lengkap.

Alternatif untuk nomor komponen OEM — bukan klaim otorisasi dari OEM.

Referensi silang

Referensi Silang Magjack

Alternatif nomor komponen (P/N) Magjack RJ45 terintegrasi dalam kategori ini — konfirmasikan sebelum memberikan penawaran.

Telusuri semua Magjack Kategori konektor magnetik RJ45 terintegrasi.

Alternatif untuk nomor komponen OEM — bukan klaim otorisasi dari OEM.

Referensi silang

Referensi Silang Transformator LAN

Alternatif P/N magnetik LAN diskrit dalam kategori ini. Bourns / lainnya memerlukan lebih banyak bukti sebelum dicantumkan.

Telusuri semua komponen magnetik LAN Kategori transformator & filter LAN.

Alternatif untuk nomor komponen OEM — bukan klaim otorisasi dari OEM.

  • Jalankan bisnis Anda dengan berbagai pilihan pembayaran yang tepercaya.

  • Gunakan nomor pesanan atau nomor pelacakan untuk memeriksa status pengiriman.

  • Dapatkan penawaran harga Anda dengan cepat dan tawarkan layanan yang lebih profesional.

  • Bantu kelola anggaran & pengeluaran Anda dengan lebih baik.

  • Dukungan sampel gratis, capai hasil pengujian Anda secara efisien.

  • Dukungan dan layanan tim profesional, untuk menyelesaikan masalah Anda tepat waktu.

  • Tanyakan apa pun yang Anda khawatirkan, kami akan membantu Anda 24/7.

  • Dapatkan penawaran Anda dengan cepat dan tawarkan layanan yang lebih profesional.

  • Temui kami dan ketahui misi, keyakinan, layanan, dan banyak lagi.

  • Temukan lokasi kami dan terhubunglah dengan kami secara dekat.

  • Manajemen mutu, pengujian, kompatibilitas, dan kepatuhan global.

  • Temukan berita dan acara terbaru di sekitar l-p.com

  • Telusuri secara mendalam panduan teknis, standar industri, dan wawasan kompatibilitas SFP.

  • Tolok ukur produk terperinci dan perbandingan berdampingan untuk membantu Anda memilih modul yang tepat.

  • Jelajahi solusi konektivitas dunia nyata untuk pusat data, perusahaan, dan jaringan telekomunikasi.

  • Tips penting dalam memilih kecepatan data, jarak transmisi, dan jenis konektor.

Pilih Mata Uang
USD - Dolar AS
EUR - Euro
GBP - Pound Inggris
CAD - Dolar Kanada
AUD - Dolar Australia
JPY - Yen Jepang
SEK - Krona Swedia
NOK - Krone Norwegia
IDR - Rupiah Indonesia
BRL - Real Brasil
THB - Baht Thailand
LP72432ANL 2.5g base-t single port smd poe+ lan transformer 24 pin

LP72432ANL 2.5G Base-T Port Tunggal SMD PoE+ Lan Transformer 24 PIN

Ringkasan Produk

Produk
LP72432ANL 2.5G Base-T Port Tunggal SMD PoE+ Lan Transformer 24 PIN
SKU
161644
P / N
LP72432ANL
Harga
IDR 41,256
saham
1610 dalam Stok
Terjual
29.9K
Patokan harga IDR 41256
Pengguna baru: IDR 180,946 Kupon untuk Pesanan Pertama Anda
Kode linkpp2610
Untuk Pemesanan Lebih dari IDR 18,094,640 Dapatkan IDR 271,420 Off
Kode Linkpp15
Untuk Pemesanan Lebih dari IDR 54,283,920 Dapatkan IDR 904,732 Off
Kode Linkpp50
Untuk Pemesanan Lebih dari IDR 90,473,200 Dapatkan IDR 1,809,464 Off
Kode Linkpp100
Pembuatan: LINK-PPP / N: LP72432ANLSKU: 161644

LINK-PP Garis Keturunan AsliDatasheetModel 3Dsemua download

Kompatibel:
LINK-PP
P/N yang kompatibel:
LP72432ANL
Harga volume Tingkat pemesanan online · jumlah lebih besar atau harga khusus berdasarkan permintaan
IDR 41256
1–9 buah
IDR 41256
10–999 buah
IDR 27232
1,000–5,999 buah
IDR 21858
6,000–11,999 buah
IDR 19796
12,000–23,999 buah
IDR 17733
24,000 buah

Butuh jumlah lebih dari yang tertera di sini, atau ingin menegosiasikan harga?

Stock:
1610 dalam Stok
Pengiriman:
IDR 604,542
untuk Indonesia melalui IP FedEx
Perkiraan waktu pengiriman: 3 - 6 hari.
5-Tahun Garansi Pengembalian 15-Hari Penukaran 15 Hari
Jaminan
  • Memberikan garansi 5 tahun yang terdepan di industri.
  • Bacalah tabel berikut ini: details garansi semua produk.
Pengembalian & Penukaran
  • Pengembalian dana akan diterima sekitar 5 hari kerja setelah barang yang dikembalikan diterima.
  • Barang yang tersedia untuk penggantian dapat dikirim dalam waktu 1 hari kerja.
  • Baca kebijakan pengembalian selengkapnya untuk details.
Gratis ongkos kirim di atas IDR 10,856,784.
Atau kirim menggunakan akun UPS / FedEx / DHL Anda sendiri saat pembayaran (IDR 0 pengiriman).
Jumlah:
SPQ 800
Total harga:
IDR 41256
Rincian kemasan
pcs 800
pcs 4800
pening
37 × 37 × 25 cm
0.002 kg
9.6 kg

LINK-PP Modul Transformator LAN LP72432ANL 2.5G Base-T untuk PC Industri (PoE+, SMD, 24 PIN, Port Tunggal)

Kecepatan LP72432ANL adalah 2.5G Base-T. Sesuai dengan standar IEEE 802.3 at, UL, Reach, RoHs, ISO19001, ISO14001. Dapat digunakan untuk Router, PC Industri, Perangkat Genggam, Generator Operasi.

LINK-PP Nomor Bagian: LP72432ANL Jenis Transformer Transformator LAN
Status Bagian Aktif Rasio Putaran - Utama: Sekunder Pemancar 1:1, Penerima 1:1
Konstruksi BUKA BINGKAI Aplikasi-Lan Ethernet (PoE+)
Jumlah Ports TUNGGAL Kecepatan 2.5G Basis-T
Paket Pita & pening Inti per Port 8
AutomDX Ya Pesan

SAMA DENGAN VERSI NL

Nomor PIN 24 Mounting Type

Permukaan gunung

Tinggi Paket (Inci/mm) 0.236/6.00 Panjang Paket (Inci/mm) 0.715/18.15
Lebar Paket (Inci/mm) 0.630/16.00 Suhu -40℃ SAMPAI +85℃
Rasio Putaran RX/TX 1KTA:1KTA Konfigurasi RX/TX T,C,S

LINK-PP

Produk yang Cocok

Film ID # Deskripsi Harga saham Yuk, Beli !

Unduh

Gambar LP72432ANL LP72432ANL-2.5G POE+ -Drawing.pdf

pertanyaan

Belum ada pertanyaan

Jadilah orang pertama yang bertanya tentang spesifikasi, kompatibilitas, atau waktu tunggu.

Ajukan Pertanyaan
  • A:
    AutoMDX is handled by the PHY, so the transformer simply has to preserve pair balance; both straight and crossed cables trained at 2.5G on our bench without any strap change. It does not change the reflow profile. What matters on the line is the Tape & Reel orientation: our label gave quantity but not pin one, so feeder setup needed the drawing. Once set, a 500 piece lot ran without a mispick and no bent leads across three reels. by LINK-PP Dukungan teknis
  • A:
    Check hipot and creepage on the assembled board, and confirm the centre tap rails against the PSE reference. On one board the powered device would not start because a centre tap was tied to the wrong rail, so the PSE never saw a valid signature; the windings were fine. With 1CT:1CT windings the supply sits on the centre of each pair, so keep those traces short and away from switching regulators. Then hold a full load soak at 2.5G. by LINK-PP Dukungan teknis
  • A:
    The open frame is helpful rather than fragile: AOI can see all twenty four joints and you can inspect the windings before the part goes on the board. We ran a conventional SAC reflow reaching 245 C and a 0.8 mm stencil, with clean fillets and no solder beading inside the frame. For aqueous washing, make sure detergent cannot sit between the windings; trapped residue shows up as leakage in the hipot test. Dry the boards fully before the first electrical check. by LINK-PP Dukungan teknis
  • A:
    It matches the usual current mode 2.5G Base-T PHY, with a centre tap on both the transmit and receive windings. Confirm against your PHY vendor reference before layout, because some parts call for a different ratio or extra common mode chokes on the line side. We checked a sample on a bench LCR meter and logged the values against the reel number. The centre taps are where the PoE+ supply enters, so keep them tied to the correct rail. by LINK-PP Dukungan teknis

Testimoni Pelanggan

  • 5

    71 Ulasan

  • 5 bintang
    96%
    4 bintang
    4%
    3 bintang
    0%
    2 bintang
    0%
    1 bintang
    0%
  • Semua Ulasan (71)
Tidak ada data
M *** o
India
Pembelian Terverifikasi
5.0
2025-12-28
The 16.00 mm width and twenty four pin count drive the footprint, so the first check on receipt is the land pattern against the reel part number. We confirmed all twenty four pads had clean fillets after a single 245 C pass with a 0.8 mm stencil, and found no solder beading inside the open frame. Next came hipot and creepage, since this is the PoE+ rated version and the centre taps carry supply voltage. Then a quick inductance check on four samples to confirm batch consistency. Last, the date code and reel number went onto the batch sheet. Four checks, and the low profile means AOI can see every joint.
Sebuah
Denmark
Pembelian Terverifikasi
5.0
2025-01-20
One 2.5G transformer, twenty four pins.
Di
Kolumbia
Pembelian Terverifikasi
5.0
2024-11-20
At 6.00 mm tall this is one of the lowest parts on the board, and the incoming sheet treats that as an advantage rather than a detail. We measured ten pieces across three reels and saw no more than 0.05 mm spread, then checked the clearance to a heat sink that sits above the transformer in the industrial PC chassis; 2.4 mm remained. Open frame construction lets us inspect the windings under a loupe before reflow, which is not possible on a potted part. We also verified the 1CT:1CT turns ratio on a sample with a bench LCR meter and logged the values against the reel number.
H *** n
Malaysia
Pembelian Terverifikasi
5.0
2024-09-07
AutoMDX means we did not have to specify a crossover cable for the link partner, and both straight and crossed pairs came up at 2.5G on the bench. One less thing for the installer to get wrong ;)
M *** g
Mexico
Pembelian Terverifikasi
5.0
2024-08-20
Tape & Reel arrived with no bent leads across three reels, and the pick and place feeder ran a full 500 piece lot without a single mispick. Cavity orientation was consistent from the first part to the last.
Pembelian Terverifikasi
.0
Menampilkan komentar

By 

Belum ada ulasan

Jadilah orang pertama yang berbagi pengalaman Anda dengan produk ini.

Tulis Ulasan
|
Terjual