Όλες οι κατηγορίες
Ενότητες SFP
Υπηρεσίες
Υποστήριξη
Σχετικά με εμάς
Υποστηρικτικό υλικό
Προσέξτε την επιχείρησή σας με μια ποικιλία από αξιόπιστες επιλογές πληρωμής.
Χρησιμοποιήστε τον αριθμό παραγγελίας ή τον αριθμό παρακολούθησης για να ελέγξετε την κατάσταση αποστολής.
Λάβετε γρήγορα την προσφορά σας και προσφέρετε πιο επαγγελματική εξυπηρέτηση.
Βοηθήστε να διαχειριστείτε καλύτερα τον προϋπολογισμό και τις δαπάνες σας.
Δωρεάν υποστήριξη δειγμάτων, επιτύχετε τα αποτελέσματα των δοκιμών σας αποτελεσματικά.
Επαγγελματική υποστήριξη και εξυπηρέτηση ομάδας, για την έγκαιρη επίλυση των προβλημάτων σας.
Ρωτήστε μας για οτιδήποτε σας απασχολεί, θα σας βοηθήσουμε 24/7.
Λάβετε την προσφορά σας γρήγορα και σας προσφέρουμε πιο επαγγελματική εξυπηρέτηση.
Γνωρίστε μας και γνωρίστε την αποστολή, τις πεποιθήσεις μας, την υπηρεσία και πολλά άλλα.
Βρείτε τις τοποθεσίες μας και συνδεθείτε στενά μαζί μας.
Διαχείριση ποιότητας, δοκιμές, συμβατότητα και παγκόσμια συμμόρφωση.
Ξενάγηση στο εργαστήριο, πλατφόρμα οπτικών δοκιμών, εργαλείο συμβατότητας και αιτήματα δοκιμών.
Μάθετε τα πιο πρόσφατα νέα και τα γεγονότα γύρω l-p.com
Εμβάθυνση σε τεχνικούς οδηγούς, πρότυπα του κλάδου και πληροφορίες για τη συμβατότητα με SFP.
Λεπτομερή benchmarks προϊόντων και συγκρίσεις μεταξύ τους που θα σας βοηθήσουν να επιλέξετε τη σωστή ενότητα.
Εξερευνήστε λύσεις συνδεσιμότητας σε πραγματικό κόσμο για κέντρα δεδομένων, επιχειρήσεις και τηλεπικοινωνιακά δίκτυα.
Βασικές συμβουλές για την επιλογή ρυθμών δεδομένων, αποστάσεων μετάδοσης και τύπων συνδέσμων.
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
LS-CW451G-80C comes as a 1450nm CWDM SFP module with support for data rates of up to 1.25Gbps. Built with a DFB laser and PIN photodiode, it delivers transmission over SMF distances of up to 80km and operates within a 0 to +70°C temperature range. Real-time digital diagnostic monitoring enables continuous monitoring of essential module parameters and operating status.
| LINK-PP Αριθμός Μέρος | LS-CW451G-80C | Ονομα πωλητή | LINK-PP |
| Form Factor | SFP | Μέγιστο ρυθμό δεδομένων | 1.25Gbps |
| Μήκος κύματος | 1450nm | Μέγιστη απόσταση καλωδίου | 80km |
| Connector | Διπλό LC | Εικόνες / Βίντεο | SMF |
| Τύπος πομπού | DFB | Τύπος δέκτη | PIN |
| TX Power | -1 έως +4dBm | RX Power | -26 έως -1dBm |
| Ευαισθησία δέκτη | -26dBm | δέκτης υπερφόρτωσης | -1dBm |
| Ηλεκτρομαγνητική συμβατότητα (EMC) | υποστηριζόνται! | DDM | υποστηριζόνται! |
| Εύρος θερμοκρασίας λειτουργίας | 0 σε 70 ° C | Πρωτόκολλα | SFP MSA, SFF-8472 |
LINK-PP LS-CW451G-80C delivers reliable optical transmission for metropolitan-area network links over a single 1450nm CWDM channel. This module combines standard SFP mechanical compatibility with extended 80km reach and digital diagnostics. Its design prioritizes fiber utilization efficiency, real-time link supervision, and straightforward integration into existing gigabit equipment.
This optical module adopts a hot-pluggable SFP footprint for effortless installation and replacement without system power-down. It fully complies with SFP MSA specifications, ensuring interoperability with a wide range of switches and routers. The industry-standard electrical interface and housing simplify network upgrades and maintenance tasks.
The 1Gbps data rate positions this transceiver as a dependable solution for metro‑area fiber connections. It handles Ethernet traffic in access rings and aggregation points across city networks, linking central hubs with remote facilities. This 1G speed aligns perfectly with the bandwidth requirements of typical metropolitan applications and ensures seamless operation with existing gigabit‑capable equipment.
Coarse wavelength division multiplexing allows multiple wavelengths to share one fiber pair, reducing cable infrastructure costs. This module operates as one channel in a standard CWDM grid, enabling capacity expansion without adding new fibers. Network planners can mix it with other CWDM transceivers at different wavelengths for flexible link design.
The 1450nm center wavelength falls within the CWDM band, offering low attenuation in typical single-mode fiber. This specific wavelength avoids crosstalk with adjacent channels when used in a multiplexed system. It also aligns with common CWDM mux/demux filters for straightforward channel assignment.
An integrated 1450nm DFB laser and high-sensitivity receiver enable error-free operation over distances up to 80km. The link budget accounts for dispersion and loss in standard single-mode fiber, ensuring stable performance across the full reach. This long-haul capability makes it ideal for interconnecting distant campus or city-wide network nodes.
The duplex LC connector provides a secure, polarity-consistent physical interface for single‑mode fiber patch cords. This standardized optical interface ensures quick mating with existing fiber plant and distribution panels. It supports both transmit and receive on separate fibers, matching typical CWDM deployment practices.
Digital diagnostics monitoring (DDM) continually reports critical parameters such as optical power, supply voltage, temperature, and bias current. Real-time data helps operators detect fiber degradation or connector contamination before service interruptions occur. This monitoring function also facilitates remote fault isolation and proactive link maintenance.
| Εικόνες | ΤΑΥΤΟΤΗΤΑ# | Περιγραφή | Τιμή | στοκ | Προσθήκη στο καλάθι |
Q: Our fiber route is about 72 km and includes patch panels and splice points. Can we use this 80km CWDM SFP module for the link? Από Q***e on 2026-03-10
A: Potentially, yes. The 80km rating is the maximum nominal transmission distance, but the total fiber loss must remain within the module’s optical budget after including fiber attenuation, connector loss, splice loss, and CWDM MUX/DEMUX insertion loss. Από τον διαχειριστή on 2026-03-11
Q: We already have a 1470nm CWDM module at the remote end. Can we pair it with this LS-CW451G-80C 1450nm module? Από τον/την R***k on 2026-01-21
A: No. For a normal duplex CWDM connection, both ends should use matching 1450nm modules. A 1450nm module should not be directly paired with a 1470nm module. Από τον διαχειριστή on 2026-01-22
Q: Our modules are installed inside a controlled central office, but some racks run warm during peak traffic. Is the 0°C to +70°C rating based on ambient temperature or module case temperature? Από τον/την P***g on 2025-06-29
A: The stated 0°C to +70°C specification is the operating case-temperature range. Actual module case temperature can be higher than room ambient temperature, depending on airflow, switch design, port density, and power consumption. Από τον διαχειριστή on 2025-06-30
Q: Our switch provides a standard 3.3V SFP power supply. Does this module need any additional power connection? Από τον/την S***n on 2025-05-19
A: No. The LS-CW451G-80C module operates from a single +3.3V power supply through the SFP host interface and does not require an external power connection. Από τον διαχειριστή on 2025-05-20
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} ΠωληθείUnited States
Μεταφορέας
Παρακολούθηση Χρόνου Παράδοσης Κόστους
Εταιρεία
Κόστος Χρόνου
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} Προς διαπραγμάτευση {{shipitem.datemin}}-{{shipitem.datemax}} ημέρες Διαθέσιμος