Όλες οι κατηγορίες
Ενότητες SFP
Υπηρεσίες
Υποστήριξη
Σχετικά με εμάς
Υποστηρικτικό υλικό
Προσέξτε την επιχείρησή σας με μια ποικιλία από αξιόπιστες επιλογές πληρωμής.
Χρησιμοποιήστε τον αριθμό παραγγελίας ή τον αριθμό παρακολούθησης για να ελέγξετε την κατάσταση αποστολής.
Λάβετε γρήγορα την προσφορά σας και προσφέρετε πιο επαγγελματική εξυπηρέτηση.
Βοηθήστε να διαχειριστείτε καλύτερα τον προϋπολογισμό και τις δαπάνες σας.
Δωρεάν υποστήριξη δειγμάτων, επιτύχετε τα αποτελέσματα των δοκιμών σας αποτελεσματικά.
Επαγγελματική υποστήριξη και εξυπηρέτηση ομάδας, για την έγκαιρη επίλυση των προβλημάτων σας.
Ρωτήστε μας για οτιδήποτε σας απασχολεί, θα σας βοηθήσουμε 24/7.
Λάβετε την προσφορά σας γρήγορα και σας προσφέρουμε πιο επαγγελματική εξυπηρέτηση.
Γνωρίστε μας και γνωρίστε την αποστολή, τις πεποιθήσεις μας, την υπηρεσία και πολλά άλλα.
Βρείτε τις τοποθεσίες μας και συνδεθείτε στενά μαζί μας.
Διαχείριση ποιότητας, δοκιμές, συμβατότητα και παγκόσμια συμμόρφωση.
Ξενάγηση στο εργαστήριο, πλατφόρμα οπτικών δοκιμών, εργαλείο συμβατότητας και αιτήματα δοκιμών.
Μάθετε τα πιο πρόσφατα νέα και τα γεγονότα γύρω l-p.com
Εμβάθυνση σε τεχνικούς οδηγούς, πρότυπα του κλάδου και πληροφορίες για τη συμβατότητα με SFP.
Λεπτομερή benchmarks προϊόντων και συγκρίσεις μεταξύ τους που θα σας βοηθήσουν να επιλέξετε τη σωστή ενότητα.
Εξερευνήστε λύσεις συνδεσιμότητας σε πραγματικό κόσμο για κέντρα δεδομένων, επιχειρήσεις και τηλεπικοινωνιακά δίκτυα.
Βασικές συμβουλές για την επιλογή ρυθμών δεδομένων, αποστάσεων μετάδοσης και τύπων συνδέσμων.
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
LS-CW291G-80C operates as a 1290nm CWDM SFP module that sustains 1.25Gbps data rates over a single-mode fiber reach of 80km, built around a DFB laser and a PIN photodiode. The thermal range spans 0 to +70°C, while integrated digital monitoring furnishes real-time optical parameters — bias current, temperature, voltage, and optical power — with calibrated accuracy.
| LINK-PP Αριθμός Μέρος | LS-CW291G-80C | Ονομα πωλητή | LINK-PP |
| Form Factor | SFP | Μέγιστο ρυθμό δεδομένων | 1.25Gbps |
| Μήκος κύματος | 1290nm | Μέγιστη απόσταση καλωδίου | 80km |
| Connector | Διπλό LC | Εικόνες / Βίντεο | SMF |
| Τύπος πομπού | DFB | Τύπος δέκτη | PIN |
| TX Power | -1 έως +4dBm | RX Power | -26 έως -1dBm |
| Ευαισθησία δέκτη | -26dBm | δέκτης υπερφόρτωσης | -1dBm |
| Ηλεκτρομαγνητική συμβατότητα (EMC) | υποστηριζόνται! | Υποστήριξη DOM | Ναι |
| Εύρος θερμοκρασίας λειτουργίας | 0 σε 70 ° C | Πρωτόκολλα | SFP MSA, SFF-8472 |
LINK-PP LS-CW291G-80C is a commercial-grade 1290nm CWDM SFP module that delivers 1Gbps data rates over single-mode fiber up to 80km. It incorporates a duplex LC optical interface, real-time digital optical monitoring (DOM), and full compliance with the SFP MSA standard. The hot-pluggable form factor enables easy installation and field replacement without system interruption.
This optical module adopts the standard hot-pluggable SFP footprint, allowing direct insertion into any SFP-compliant port. Its electrical and mechanical interfaces are fully aligned with the SFP MSA, ensuring interoperability with a wide range of host equipment.
Designed for regional long-haul backbones, this transceiver provides a 1Gbps throughput over extended network spans. Its stable data rate ensures that traffic flows smoothly across point-to-point trunks, with minimal variation in latency under normal operating conditions.
The CWDM approach multiplexes multiple wavelength channels onto a single fiber, significantly reducing the need for additional fiber strands. This technology maximizes existing infrastructure capacity, lowering both deployment costs and cable plant complexity.
The 1290nm wavelength sits within the CWDM spectrum and delivers a good combination of relatively low dispersion and manageable loss over single-mode fiber. Its adoption leverages the inherent optical properties of this band, supporting clean eye patterns and stable power budgets for the link.
The transmission distance reaches up to 80km over single-mode fiber without requiring external amplification or dispersion compensation. This reach is achieved through the DFB laser’s optical output power and the PIN receiver’s sensitivity, ensuring reliable link closure at the specified bit rate.
The duplex LC connector provides a compact, snap-in locking mechanism that ensures secure fiber mating and low insertion loss. This industry-standard interface facilitates quick patching and is compatible with most optical distribution frames and patch panels.
The DOM (Digital Optical Monitoring) function continuously tracks key operating parameters, including transmitter bias current, receiver optical power, supply voltage, and internal temperature. These real-time readings allow network administrators to proactively detect link degradation and troubleshoot faults remotely via the host management bus.
| Εικόνες | ΤΑΥΤΟΤΗΤΑ# | Περιγραφή | Τιμή | στοκ | Προσθήκη στο καλάθι |
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} ΠωληθείUnited States
Μεταφορέας
Παρακολούθηση Χρόνου Παράδοσης Κόστους
Εταιρεία
Κόστος Χρόνου
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} Προς διαπραγμάτευση {{shipitem.datemin}}-{{shipitem.datemax}} ημέρες Διαθέσιμος
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}