Alle Kategorien
SFP-Module
Services
Unterstützung
Über uns
Ressourcen
Kümmern Sie sich um Ihr Geschäft mit einer Vielzahl vertrauenswürdiger Zahlungsoptionen.
Verwenden Sie die Bestellnummer oder die Sendungsverfolgungsnummer, um den Versandstatus zu überprüfen.
Erhalten Sie schnell Ihr Angebot und profitieren Sie von einem professionelleren Service.
Helfen Sie dabei, Ihr Budget und Ihre Ausgaben besser zu verwalten.
Kostenlose Probenunterstützung, um Ihre Testergebnisse effizient zu erzielen.
Professionelle Teamunterstützung und Service, um Ihre Probleme rechtzeitig zu lösen.
Fragen Sie uns, was immer Sie interessiert, wir helfen Ihnen rund um die Uhr.
Erhalten Sie schnell Ihr Angebot und bieten Sie einen professionelleren Service.
Lernen Sie uns kennen und erfahren Sie mehr über unsere Mission, unseren Glauben, unseren Service und mehr.
Finden Sie unsere Standorte und vernetzen Sie sich intensiv mit uns.
Qualitätsmanagement, Tests, Kompatibilität und globale Konformität.
Laborrundgang, optischer Prüfstand, Kompatibilitätstool und Testanforderungen.
Erfahren Sie die neuesten Nachrichten und Veranstaltungen in der Umgebung l-p.com
Tiefgehende Einblicke in technische Leitfäden, Industriestandards und SFP-Kompatibilität.
Detaillierte Produkt-Benchmarks und direkte Vergleiche helfen Ihnen bei der Auswahl des richtigen Moduls.
Entdecken Sie praxisnahe Konnektivitätslösungen für Rechenzentren, Unternehmen und Telekommunikationsnetze.
Wichtige Tipps zur Auswahl von Datenraten, Übertragungsdistanzen und Steckertypen.
Neukunde? Konto erstellen
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Operating at 1350nm on the CWDM grid, the LS-CW351G-80C SFP module delivers 1Gbps data rates and integrates a DFB laser with a PIN photodiode for SMF reach up to 80km. It operates reliably across a case temperature range of 0 to +70°C and includes real-time digital diagnostic monitoring for optical power, temperature, voltage, and bias current. The module adheres to SFP MSA and CWDM wavelength tolerances, with typical transmit optical power and receiver sensitivity specified for the full 80km link budget.
| LINK-PP Artikelnummer | LS-CW351G-80C | Herstellername | LINK-PP |
| Formfaktor | SFP | Max. Datenrate | 1.25Gbps |
| Wellenlänge | 1350nm | Maximaler Kabelabstand | 80 km |
| Anschluss | Duplex-LC | Medien | SMF |
| Sendertyp | DFB | Empfängertyp | PIN |
| TX-Leistung | -1 bis +4 dBm | RX-Leistung | -26 bis -1 dBm |
| Empfänger-Empfindlichkeit | -26dBm | Empfänger Überlastung | -1dBm |
| EMV (Elektromagnetische Verträglichkeit) | Unterstützt | DDM-Unterstützung | Ja |
| Betriebstemperaturbereich | 0 bis 70 ° C | Protokolle | SFP MSA, SFF-8472 |
LINK-PP LS-CW351G-80C is a commercial-grade 1350nm CWDM SFP transceiver that delivers 1Gbps data rates over single-mode fiber up to 80km. It features a duplex LC interface, digital diagnostic monitoring (DDM) for real-time operation checks, and operates within 0 to +70°C case temperature. This module combines CWDM technology with long-reach capability for efficient fiber utilization.
This optical transceiver module follows the hot-pluggable SFP footprint and is fully compliant with the SFP MSA. It allows easy installation and replacement without powering down the system. The electrical interface meets the MSA-defined pinout and signal requirements.
The 1Gbps data rate provides sufficient bandwidth for optical multiplexing backbones that aggregate multiple lower-speed links. This module serves as a cost-effective transceiver in CWDM-based backbone networks, supporting point-to-point connections over long spans.
The CWDM technology employed in this module enables multiple channels to share a single fiber by using different wavelengths. It reduces the need for additional fiber strands, thus improving fiber utilization efficiency in metro and access networks.
The 1350nm wavelength is one of the standard CWDM grid channels, allowing this module to coexist with other CWDM transceivers in the same fiber. It provides a specific transmission window with low attenuation for single-mode fiber.
The 80km transmission reach is achieved through the use of a DFB laser and a PIN photodiode with optimized sensitivity. This module can drive signals across long-distance metro rings without requiring intermediate amplification.
The duplex LC interface provides a standard and reliable physical connection for single-mode fiber patch cords. It ensures low insertion loss and easy polarity management in dense patch panels.
The DDM function continuously monitors key parameters such as Rx/Tx optical power, operating temperature, supply voltage, and laser bias current. It allows the host system to detect link degradation or fault conditions in real time, facilitating proactive maintenance.
| Fotos | ICH WÜRDE# | Beschreibung | Preis | Lagerfahrzeug | In den Warenkorb |
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} VerkauftUSA
Carrier
Kosten, Lieferzeit, Sendungsverfolgung
Firma
Kosten Zeit
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} Zu verhandeln {{shipitem.datemin}}-{{shipitem.datemax}} Tage Verfügbar
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}