Tất cả Sản phẩm
Quang học tương thích
Dịch vụ
Trợ giúp
Về Chúng Tôi
Trung Tâm Tài Liệu
Bộ chuyển đổi mạng LAN Base-T 10/100
Bộ chuyển đổi mạng LAN 1000 Base-T
Bộ chuyển đổi mạng LAN 2.5G Base-T
Bộ chuyển đổi mạng LAN 5G Base-T
Bộ chuyển đổi mạng LAN Base-T 10/100
Bộ chuyển đổi mạng LAN 1000 Base-T
Bộ chuyển đổi mạng LAN 2.5G Base-T
Các mô-đun quang học được mã hóa OEM dành cho các nền tảng chính.
Các trang album được tuyển chọn dành cho lồng chim và các thiết bị quang học bằng đồng.
Hãy an tâm kinh doanh với nhiều phương thức thanh toán đáng tin cậy.
Sử dụng số đơn hàng hoặc số theo dõi để kiểm tra tình trạng vận chuyển.
Nhận báo giá nhanh chóng và được cung cấp dịch vụ chuyên nghiệp hơn.
Giúp quản lý ngân sách và chi tiêu của bạn tốt hơn.
Hỗ trợ mẫu miễn phí, đạt được kết quả thử nghiệm một cách hiệu quả.
Đội ngũ hỗ trợ và dịch vụ chuyên nghiệp, giải quyết vấn đề của bạn kịp thời.
Hãy hỏi chúng tôi bất cứ điều gì bạn quan tâm, chúng tôi sẽ hỗ trợ bạn 24/7.
Nhận báo giá nhanh chóng và cung cấp cho bạn dịch vụ chuyên nghiệp hơn.
Hãy gặp chúng tôi và tìm hiểu về sứ mệnh, niềm tin, dịch vụ của chúng tôi cùng nhiều thông tin khác.
Tìm địa điểm của chúng tôi và kết nối chặt chẽ với chúng tôi.
Quản lý chất lượng, kiểm thử, khả năng tương thích và tuân thủ các quy định toàn cầu.
Tìm hiểu những tin tức và sự kiện mới nhất xung quanh l-p.com
Tìm hiểu sâu về các hướng dẫn kỹ thuật, tiêu chuẩn ngành và thông tin chi tiết về khả năng tương thích của SFP.
Bảng so sánh chi tiết các sản phẩm và đối chiếu song song giúp bạn lựa chọn mô-đun phù hợp.
Khám phá các giải pháp kết nối thực tế cho trung tâm dữ liệu, doanh nghiệp và mạng viễn thông.
Những lời khuyên thiết yếu về việc lựa chọn tốc độ truyền dữ liệu, khoảng cách truyền dẫn và loại đầu nối.
Bạn cần số lượng nhiều hơn các mức này, hoặc muốn thương lượng giá cả?
DWDM-SFP10G-42.14-I is built as an industrial-grade 10GBASE-DWDM SFP+ module for channel C44 at 1542.14nm, delivering data rates up to 10.7Gbps through a cooled EML laser and PIN photodiode configuration designed for 40km SMF transmission. Also, the module supports real-time digital optical monitoring and can operate stably across a temperature range of -40°C to +85°C.
| Số phần của Dell | DWDM-SFP10G-42.14-I | Tên nhà cung cấp | LINK-PP |
| Form Factor | SFP + | Tốc độ dữ liệu tối đa | 10.7Gbps |
| Bước sóng | 1542.14nm | Khoảng cách cáp tối đa | 40km |
| của DINTEK | LC hai mặt | Phương tiện truyền thông | SMF |
| Loại máy phát | EML | Loại máy thu | PIN |
| Năng lượng TX | -1 đến + 2dBm | Nguồn RX | -16 đến -1dBm |
| Độ nhạy thu | <-15.5dBm | DDM / DOM | Hỗ trợ |
| Phạm vi nhiệt độ vận hành | -40 đến + 85 ° C | giao thức | SFP+ MSA, SFF-8431, SFF 8472, 10GBASE-ER/EW, SDH STM64 |
Tương thích với Dell DWDM-SFP10G-42.14-I LINK-PP delivers 10G optical connectivity on the 1542.14nm C44 channel, supporting transmission distances up to 40km over single-mode fiber. Designed for 100GHz DWDM systems, the transceiver features a hot-pluggable SFP+ design, duplex LC fiber connections, and built-in digital diagnostic monitoring.
The hot-pluggable SFP+ form factor allows this optical transceiver to be installed or replaced in supported network equipment without shutting down the system. Built to SFP+ MSA specifications, it uses a single +3.3V power supply and operates within an industrial case temperature range of -40°C to +85°C.
With a maximum data rate of 10.7Gbps, this DWDM SFP+ module supports the transfer of large amounts of network traffic between distributed telecom facilities. The available 10G bandwidth helps connect separate communication sites through compatible optical transport equipment.
A 100GHz DWDM channel grid allows separate optical wavelengths to carry different data streams through shared fiber infrastructure. When connected to compatible multiplexing and demultiplexing equipment, this SFP+ DWDM transceiver helps increase fiber capacity without requiring a dedicated fiber pair for every channel.
The C44 channel corresponds to a fixed center wavelength of 1542.14nm on the standard ITU-T frequency grid. This wavelength must align with the assigned optical filter channel to ensure proper signal routing through the wavelength-selective equipment.
Using a cooled EML laser for optical transmission and a PIN photodiode for signal reception, the module supports fiber connections extending up to 40km over SMF. Its actual operating reach depends on the available optical power budget and the combined attenuation of the transmission path.
A duplex LC optical interface uses two separate fiber connections, with one carrying transmitted signals and the other receiving incoming data. The connector arrangement supports full-duplex communication through standard LC single-mode fiber patch cables.
Real-time Digital Optical Monitoring (DOM) provides access to operating measurements such as module temperature, supply voltage, laser bias current, and Tx/Rx optical power. These values can be read through compatible host equipment to help detect unusual operating conditions and support routine network maintenance.
Đã kiểm tra khả năng tương thích trong LINK-PP phòng thí nghiệm. Xem báo cáo thử nghiệm
Tương thích với Dell DWDM-SFP10G-42.14-I LINK-PP 10G SFP+ DWDM transceiver is manufactured under established quality control procedures, with an ISO 9001 quality management system and applicable CE, RoHS, and FCC compliance requirements supporting consistent product quality and manufacturing standards.
Each 10G DWDM optical transceiver goes through optical performance checks, electrical interface testing, data transmission verification, and temperature testing to confirm that it meets the specified operating requirements before shipment.
Quality certification procedures and compliance checks help ensure that the optical transceiver module follows relevant industry standards and meets applicable product quality requirements.
The module is tested with compatible host equipment to check module recognition, interface communication, and operating stability for proper integration into supported network devices.
We perform optical spectrum, eye pattern, bit error rate, and temperature tests on the DWDM-SFP10G-42.14-I DWDM transceiver to verify its C44 optical characteristics, 10G signal integrity, and operation under industrial temperature conditions. Learn more about our testing procedures and quality assurance practices at the LINK-PP Trung tâm hỗ trợ kiểm thử.
Examine spectral measurements to confirm correct C44 wavelength channel alignment.
Analyze eye diagram patterns to assess transmitted 10G signal quality.
Record transmission error rates to evaluate accuracy during continuous operation.
Check operational stability across the specified industrial operating temperature range.
LINK-PP packages the DWDM-SFP10G-42.14-I 10G DWDM SFP+ transceiver with suitable protective measures to help prevent damage during storage, handling, and transportation. From order confirmation to final delivery, we focus on careful shipment preparation, efficient dispatch, and convenient international shipping services.
Apply anti-static protection to prevent electrostatic damage during product handling.
Reduce potential damage caused by sudden impacts during product transportation.
Prepare customer orders promptly and arrange dispatch for timely shipment.
Offer international delivery services to support customers across different countries.
Insert the DWDM-SFP10G-42.14-I 10G DWDM module into a supported SFP+ slot and connect its transmit and receive fibers to the assigned C44 wavelength paths through compatible DWDM equipment. Confirm proper fiber polarity and check the connection status for communication between distributed telecom facilities.
LINK-PP Cung cấp hỗ trợ kỹ thuật toàn diện, từ tư vấn trước bán hàng đến hỗ trợ sau triển khai, đảm bảo tích hợp suôn sẻ và hiệu suất mạng đáng tin cậy.
Tư vấn chuyên nghiệp giúp bạn lựa chọn mô-đun DWDM-SFP10G-42.14-I tối ưu nhất cho thiết kế mạng và nhu cầu ứng dụng của bạn.
Đã xác nhận khả năng tương thích với LINK-PP các thiết bị chuyển mạch và các nền tảng mạng thông dụng khác để triển khai liền mạch.
Hướng dẫn từng bước toàn diện về cài đặt, cấu hình và thiết lập ban đầu, đảm bảo triển khai chính xác và vận hành ổn định, đáng tin cậy ngay từ đầu.
Hỗ trợ kỹ thuật liên tục trong suốt vòng đời sản phẩm, mang lại sự ổn định lâu dài cho các mạng lưới cấp doanh nghiệp và nhà mạng.
LINK-PP Cung cấp hỗ trợ sau bán hàng để đảm bảo việc triển khai suôn sẻ và vận hành đáng tin cậy của các mô-đun quang học.
Đổi trả và hoàn tiền trong vòng 15 ngày không cần lý do
Đổi trả miễn phí cho các sản phẩm bị lỗi ngay khi nhận hàng (DOA) hoặc bị lỗi trong thời gian ban đầu.
Dịch vụ sửa chữa miễn phí cho các lỗi sản xuất trong suốt thời gian bảo hành.
Các điều khoản và điều kiện loại trừ bảo hành được áp dụng.
![]() LS-DW4410-A0C
| ![]() LS-DW6110-A0C
| ![]() LS-DW6010-A0C
| ![]() LS-DW5910-A0C
| ![]() LS-DW5810-A0C
|
|---|
tương hợp | thung lũng nhỏ | thung lũng nhỏ | thung lũng nhỏ | thung lũng nhỏ | thung lũng nhỏ | thung lũng nhỏ |
Tốc độ dữ liệu (Tối đa) | 10.7Gbps | 10.7Gbps | 10.7Gbps | 10.7Gbps | 10.7Gbps | 10.7Gbps |
Bước sóng | 1542.14nm | 1542.14nm | 1528.77nm | 1529.55nm | 1530.33nm | 1531.12nm |
của DINTEK | LC hai mặt | LC hai mặt | LC hai mặt | LC hai mặt | LC hai mặt | LC hai mặt |
Khoảng cách cáp (Tối đa) | 40km | 100km | 100km | 100km | 100km | 100km |
Loại cáp | SMF | SMF | SMF | SMF | SMF | SMF |
Năng lượng TX | -1 đến + 2dBm | -1 đến + 5dBm | -1 đến + 5dBm | -1 đến + 5dBm | -1 đến + 5dBm | -1 đến + 5dBm |
Độ nhạy thu | -16 đến -1dBm | -23dBm | -23dBm | -23dBm | -23dBm | -23dBm |
Nhiệt độ hoạt động | -40 đến + 85 ° C | 0 đến 70 ° C | 0 đến 70 ° C | 0 đến 70 ° C | 0 đến 70 ° C | 0 đến 70 ° C |
Tên nhà cung cấp | LINK-PP | LINK-PP | LINK-PP | LINK-PP | LINK-PP | LINK-PP |
Số phần của Dell | DWDM-SFP10G-42.14-I | DW-SFP10G100-44 | DW-SFP10G100-61 | DW-SFP10G100-60 | DW-SFP10G100-59 | DW-SFP10G100-58 |
Nhiệt độ | công nghiệp | Thương mại | Thương mại | Thương mại | Thương mại | Thương mại |
Form Factor | SFP + | SFP + | SFP + | SFP + | SFP + | SFP + |
Loại máy phát | EML | EML | EML | EML | EML | EML |
Loại máy thu | PIN | APD | APD | APD | APD | APD |
DDM / DOM | Hỗ trợ | Hỗ trợ | Hỗ trợ | Hỗ trợ | Hỗ trợ | Hỗ trợ |
giao thức | SFP+ MSA, SFF-8431, SFF 8472, 10GBASE-ER/EW, SDH STM64 | Tuân thủ SFP+ MSA | Tuân thủ SFP+ MSA | Tuân thủ SFP+ MSA | Tuân thủ SFP+ MSA | Tuân thủ SFP+ MSA |
| Những bức ảnh | ID# | Mô tả Chi tiết | Giá | Cổ phiếu | Thêm vào giỏ hàng |
Chưa có câu hỏi nào.
Hãy là người đầu tiên hỏi về thông số kỹ thuật, khả năng tương thích hoặc thời gian giao hàng.
Đặt một câu hỏi14 đánh giá
By
Chưa có đánh giá nào
Hãy là người đầu tiên chia sẻ trải nghiệm của bạn về sản phẩm này.
Viết bình luậnViệt Nam
Carrier
Chi phí·Thời gian giao hàng·Theo dõi
Tên Công Ty
Chi phí·Thời gian
Free Shipping To Be Negotiated Available