Tất cả Sản phẩm
Quang học tương thích
Dịch vụ
Trợ giúp
Về Chúng Tôi
Trung Tâm Tài Liệu
Bộ chuyển đổi mạng LAN Base-T 10/100
Bộ chuyển đổi mạng LAN 1000 Base-T
Bộ chuyển đổi mạng LAN 2.5G Base-T
Bộ chuyển đổi mạng LAN 5G Base-T
Bộ chuyển đổi mạng LAN Base-T 10/100
Bộ chuyển đổi mạng LAN 1000 Base-T
Bộ chuyển đổi mạng LAN 2.5G Base-T
Các mô-đun quang học được mã hóa OEM dành cho các nền tảng chính.
Các trang album được tuyển chọn dành cho lồng chim và các thiết bị quang học bằng đồng.
Hãy an tâm kinh doanh với nhiều phương thức thanh toán đáng tin cậy.
Sử dụng số đơn hàng hoặc số theo dõi để kiểm tra tình trạng vận chuyển.
Nhận báo giá nhanh chóng và được cung cấp dịch vụ chuyên nghiệp hơn.
Giúp quản lý ngân sách và chi tiêu của bạn tốt hơn.
Hỗ trợ mẫu miễn phí, đạt được kết quả thử nghiệm một cách hiệu quả.
Đội ngũ hỗ trợ và dịch vụ chuyên nghiệp, giải quyết vấn đề của bạn kịp thời.
Hãy hỏi chúng tôi bất cứ điều gì bạn quan tâm, chúng tôi sẽ hỗ trợ bạn 24/7.
Nhận báo giá nhanh chóng và cung cấp cho bạn dịch vụ chuyên nghiệp hơn.
Hãy gặp chúng tôi và tìm hiểu về sứ mệnh, niềm tin, dịch vụ của chúng tôi cùng nhiều thông tin khác.
Tìm địa điểm của chúng tôi và kết nối chặt chẽ với chúng tôi.
Quản lý chất lượng, kiểm thử, khả năng tương thích và tuân thủ các quy định toàn cầu.
Tìm hiểu những tin tức và sự kiện mới nhất xung quanh l-p.com
Tìm hiểu sâu về các hướng dẫn kỹ thuật, tiêu chuẩn ngành và thông tin chi tiết về khả năng tương thích của SFP.
Bảng so sánh chi tiết các sản phẩm và đối chiếu song song giúp bạn lựa chọn mô-đun phù hợp.
Khám phá các giải pháp kết nối thực tế cho trung tâm dữ liệu, doanh nghiệp và mạng viễn thông.
Những lời khuyên thiết yếu về việc lựa chọn tốc độ truyền dữ liệu, khoảng cách truyền dẫn và loại đầu nối.
Bạn cần số lượng nhiều hơn các mức này, hoặc muốn thương lượng giá cả?
DWDM-SFP10G-44.53-I operates at 1544.52nm on DWDM channel C41 as a 10GBASE-DWDM SFP+ module, supporting data rates up to 10.7Gbps and using a cooled EML laser with a PIN photodiode for transmission up to 40km over SMF. It includes real-time digital diagnostic monitoring and supports operating case temperatures from -40°C to +85°C.
| Mã số sản phẩm cực đại | DWDM-SFP10G-44.53-I | Tên nhà cung cấp | LINK-PP |
| Form Factor | SFP + | Tốc độ dữ liệu tối đa | 10.7Gbps |
| Bước sóng | 1544.52nm | Khoảng cách cáp tối đa | 40km |
| của DINTEK | LC hai mặt | Phương tiện truyền thông | SMF |
| Loại máy phát | EML | Loại máy thu | PIN |
| Năng lượng TX | -1 đến + 2dBm | Nguồn RX | -16 đến -1dBm |
| Độ nhạy thu | <-15.5dBm | DDM / DOM | Hỗ trợ |
| Phạm vi nhiệt độ vận hành | -40 đến + 85 ° C | giao thức | SFP+ MSA, SFF-8431, SFF 8472, 10GBASE-ER/EW, SDH STM64 |
Tương thích Extreme DWDM-SFP10G-44.53-I LINK-PP SFP+ module brings together DWDM technology, a 1544.52nm C41 wavelength, and up to 40km reach over single-mode fiber. Built for 100GHz wavelength spacing, it offers 10G data connectivity, efficient fiber utilization, duplex LC connections, and digital diagnostics for optical network deployments.
A hot-pluggable SFP+ footprint allows the transceiver to be inserted or replaced in compatible equipment without shutting down the host system, while compliance with the SFP+ MSA supports standard module integration. The design uses a single +3.3V power supply and operates at case temperatures from -40°C to +85°C.
Delivering data rates of up to 10.7Gbps, this optical transceiver provides 10G communication capacity for connections between distributed network sites. Such connectivity helps carry network traffic between remote facilities and central network locations through existing fiber infrastructure.
Multiple wavelength channels can carry separate data streams through a shared fiber when DWDM multiplexing equipment is used. With 100GHz channel spacing, the transceiver fits into compatible wavelength-multiplexed systems, allowing network operators to expand transmission capacity while making better use of installed fiber.
Operating at a fixed center wavelength of 1544.52nm, this transceiver occupies the C41 channel within the standard ITU-T 100GHz frequency grid. Proper wavelength matching with the corresponding channel filter is required to route its optical signal through a compatible multiplexing system.
Combining a cooled EML transmitter with a PIN photodiode receiver, the DWDM-SFP10G-44.53-I provides optical transmission over single-mode fiber at distances up to 40km. Actual link reach depends on total fiber attenuation, connector losses, and the available optical power budget.
Duplex LC optical connections handle transmit and receive signals separately, allowing full-duplex communication over a pair of single-mode fibers. Standard duplex LC patch cords provide a straightforward way to connect the transceiver to compatible fiber cabling systems.
Real-time DDM readings give network operators access to key operating values such as transceiver temperature, supply voltage, laser bias current, and transmitted and received optical power. By reviewing these measurements through a compatible host device, technicians can assess module conditions and troubleshoot link problems.
Đã kiểm tra khả năng tương thích trong LINK-PP phòng thí nghiệm. Xem báo cáo thử nghiệm
Tương thích Extreme DWDM-SFP10G-44.53-I LINK-PP SFP+ transceiver follows established quality control procedures, with manufacturing processes supported by ISO 9001 quality management practices and applicable CE, RoHS, and FCC compliance standards to meet product quality and regulatory requirements.
This SFP+ DWDM module undergoes functional checks, 10G data transmission testing, and temperature verification to assess operating stability and confirm that each module meets its specified requirements before shipment.
The module follows applicable quality and industry standards, with relevant certification documents supporting its product compliance and manufacturing requirements.
Compatibility checks help verify that the transceiver module is correctly identified by supported switches and optical networking equipment, allowing proper interface communication and consistent module operation within compatible host systems.
LINK-PP tests the DWDM-SFP10G-44.53-I DWDM SFP+ transceiver through spectrum analysis, eye pattern evaluation, bit error rate checks, and industrial temperature testing to assess its optical characteristics and 10G transmission stability. For more information about our testing methods and procedures, visit the LINK-PP Trung tâm hỗ trợ kiểm thử.
Check 1544.52nm wavelength alignment and spectral purity for C41 transmission.
Examine 10G signal eye openings to assess transmission waveform quality.
Test data accuracy under continuous 10G transmission to detect errors.
Assess module functionality across temperatures from -40°C to +85°C.
LINK-PP carefully packages the DWDM-SFP10G-44.53-I 10G SFP+ DWDM transceiver to protect it during handling and transportation. From order preparation to international delivery, our shipping process focuses on efficient dispatch, secure transport, and convenient logistics support for customers worldwide.
Prevent electrostatic discharge damage with suitable protective packaging.
Minimize impacts and movement to keep modules secure during transit.
Prepare and ship orders promptly to meet customer delivery needs.
Arrange worldwide deliveries with dependable shipping partners and tracking services.
Start by seating the DWDM-SFP10G-44.53-I 10G DWDM transceiver in a compatible SFP+ slot, then attach duplex LC fibers to the designated C41 ports on the DWDM multiplexer. Confirm the remote site's matching optical path and check the active 10G connection between distributed network locations.
LINK-PP Cung cấp hỗ trợ kỹ thuật toàn diện, từ tư vấn trước bán hàng đến hỗ trợ sau triển khai, đảm bảo tích hợp suôn sẻ và hiệu suất mạng đáng tin cậy.
Tư vấn chuyên nghiệp giúp bạn lựa chọn mô-đun DWDM-SFP10G-44.53-I tối ưu nhất cho thiết kế mạng và nhu cầu ứng dụng của bạn.
Đã xác nhận khả năng tương thích với LINK-PP các thiết bị chuyển mạch và các nền tảng mạng thông dụng khác để triển khai liền mạch.
Hướng dẫn từng bước toàn diện về cài đặt, cấu hình và thiết lập ban đầu, đảm bảo triển khai chính xác và vận hành ổn định, đáng tin cậy ngay từ đầu.
Hỗ trợ kỹ thuật liên tục trong suốt vòng đời sản phẩm, mang lại sự ổn định lâu dài cho các mạng lưới cấp doanh nghiệp và nhà mạng.
LINK-PP Cung cấp hỗ trợ sau bán hàng để đảm bảo việc triển khai suôn sẻ và vận hành đáng tin cậy của các mô-đun quang học.
Đổi trả và hoàn tiền trong vòng 15 ngày không cần lý do
Đổi trả miễn phí cho các sản phẩm bị lỗi ngay khi nhận hàng (DOA) hoặc bị lỗi trong thời gian ban đầu.
Dịch vụ sửa chữa miễn phí cho các lỗi sản xuất trong suốt thời gian bảo hành.
Các điều khoản và điều kiện loại trừ bảo hành được áp dụng.
![]() LS-DW4110-A0C
| ![]() LS-DW6110-A0C
| ![]() LS-DW6010-A0C
| ![]() LS-DW5910-A0C
| ![]() LS-DW5810-A0C
|
|---|
tương hợp | Cực | Cực | Cực | Cực | Cực | Cực |
Tốc độ dữ liệu (Tối đa) | 10.7Gbps | 10.7Gbps | 10.7Gbps | 10.7Gbps | 10.7Gbps | 10.7Gbps |
Bước sóng | 1544.52nm | 1544.52nm | 1528.77nm | 1529.55nm | 1530.33nm | 1531.12nm |
của DINTEK | LC hai mặt | LC hai mặt | LC hai mặt | LC hai mặt | LC hai mặt | LC hai mặt |
Khoảng cách cáp (Tối đa) | 40km | 100km | 100km | 100km | 100km | 100km |
Loại cáp | SMF | SMF | SMF | SMF | SMF | SMF |
Năng lượng TX | -1 đến + 2dBm | -1 đến + 5dBm | -1 đến + 5dBm | -1 đến + 5dBm | -1 đến + 5dBm | -1 đến + 5dBm |
Độ nhạy thu | -16 đến -1dBm | -23dBm | -23dBm | -23dBm | -23dBm | -23dBm |
Nhiệt độ hoạt động | -40 đến + 85 ° C | 0 đến 70 ° C | 0 đến 70 ° C | 0 đến 70 ° C | 0 đến 70 ° C | 0 đến 70 ° C |
Tên nhà cung cấp | LINK-PP | LINK-PP | LINK-PP | LINK-PP | LINK-PP | LINK-PP |
Mã số sản phẩm cực đại | DWDM-SFP10G-44.53-I | DW-SFP10G100-41 | DW-SFP10G100-61 | DW-SFP10G100-60 | DW-SFP10G100-59 | DW-SFP10G100-58 |
Nhiệt độ | công nghiệp | Thương mại | Thương mại | Thương mại | Thương mại | Thương mại |
Form Factor | SFP + | SFP + | SFP + | SFP + | SFP + | SFP + |
Loại máy phát | EML | EML | EML | EML | EML | EML |
Loại máy thu | PIN | APD | APD | APD | APD | APD |
DDM / DOM | Hỗ trợ | Hỗ trợ | Hỗ trợ | Hỗ trợ | Hỗ trợ | Hỗ trợ |
giao thức | SFP+ MSA, SFF-8431, SFF 8472, 10GBASE-ER/EW, SDH STM64 | Tuân thủ SFP+ MSA | Tuân thủ SFP+ MSA | Tuân thủ SFP+ MSA | Tuân thủ SFP+ MSA | Tuân thủ SFP+ MSA |
| Những bức ảnh | ID# | Mô tả Chi tiết | Giá | Cổ phiếu | Thêm vào giỏ hàng |
Chưa có câu hỏi nào.
Hãy là người đầu tiên hỏi về thông số kỹ thuật, khả năng tương thích hoặc thời gian giao hàng.
Đặt một câu hỏi12 đánh giá
By
Chưa có đánh giá nào
Hãy là người đầu tiên chia sẻ trải nghiệm của bạn về sản phẩm này.
Viết bình luậnViệt Nam
Carrier
Chi phí·Thời gian giao hàng·Theo dõi
Tên Công Ty
Chi phí·Thời gian
Free Shipping To Be Negotiated Available