What is the maximum data rate supported by the SFP-10G32-BX60-I SFP module?

It supports a standard data rate of 10Gbps and is backward compatible with lower rates if supported by the host switch.

Does the simplex LC/UPC connector support APC fiber patches?

No. This module has a blue LC/UPC (Ultra Physical Contact) receptacle. Plugging a green LC/APC patch cable into it will cause high insertion loss and severe optical back-reflection, which degrades performance.

What makes the SFP-10G32-BX60-I module "Industrial Grade"?

It is built with hardened components to operate reliably in harsh environments, supporting an extended temperature range from -40°C to 85°C.

How does this module handle harsh electromagnetic interference in industrial environments?

The SFP-10G32-BX60-I is housed in a fully enclosed, zinc alloy ESD-shielded metal housing. It complies with strict international EMI standards (like FCC and CE), preventing data corruption from nearby heavy machinery or high-voltage lines.

Can I link this module directly to another 1330nm-TX module on the opposite end of the single-fiber run?

No, BiDi transceivers must be deployed in pairs. You must pair this 1330nm-TX/1270nm-RX module with its matching counterpart (1270nm-TX/1330nm-RX) at the remote site.

How does the physical casing of this industrial-grade module handle heavy vibrations in roadside traffic cabinets or industrial environments?

It features a reinforced zinc alloy housing and a heavy-duty bail latch mechanism specifically designed to withstand structural vibrations and mechanical shock.

Our outdoor node enclosures reach up to 75°C in Arizona summers; will the 1330nm/1270nm center wavelengths drift and cause link flapping?

Not at all, as this is an industrial-grade BiDi optical transceiver rated up to 85°C that utilizes temperature-stabilized lasers to prevent spectral drifting under extreme heat.

If our network monitoring system catches a severe drop in RX power via DOM, does that indicate module failure or line attenuation?

An isolated drop in RX power while TX power remains steady almost always points to fiber micro-bends, cable degradation, or dust contamination at the patch panel.

Breadcrumb: Home; Products; Optics Transceivers | SFP Modules; 10/25/40G/100G Transceiver Modules; 10G SFP+; 212562

Click to open expanded view

FS SFP-10G32-BX60-I Compatible LINK-PP 10G SFP+ BiDi 1330nm-TX/1270nm-RX 60km Simplex LC/UPC DOM SMF Optical Transceiver Module (Industrial)

Name: FS SFP-10G32-BX60-I Compatible LINK-PP 10G SFP+ BiDi 1330nm-TX/1270nm-RX 60km Simplex LC/UPC DOM SMF Optical Transceiver Module (Industrial)
Brand: LINK-PP
SKU: 212562
Price: 54.61 USD
Availability: InStock
Rating: 5 (22 reviews)

# 212562

Product: FS SFP-10G32-BX60-I Compatible LINK-PP 10G SFP+ BiDi 1330nm-TX/1270nm-RX 60km Simplex LC/UPC DOM SMF Optical Transceiver Module (Industrial)
SKU: 212562
P/N: LS-BL332710-60I
Price: $ 63.5
Stock: 904 in Stock
Sold: 1K
Product URL: https://www.l-p.com/products/494103.htm

For Order Over $1000 Get $15.00 Off , Code: Linkpp15

For Order Over $3000 Get $50.00 Off , Code: Linkpp50

For Order Over $5000 Get $100.00 Off , Code: Linkpp100

New Users: $10 Coupon for Orders , Code: linkpp2610

22 Reviews

4 Questions

Request Stock

1K Sold

$ 63.5

Free shipping over $600, If you need a more favorable price, please contact us directly.

Qty (pcs) :

Unit Price :

$ 63.5

100

$ 60.325

1000

$ 58.42

3000

$ 56.515

6000

$ 54.61

Manufacture: LINK-PP

P/N: LS-BL332710-60I

Compatible:: Cisco; LINK-PP; Arista; Brocade; DELL; Extreme; FS; Fortinet; Generic; H3C; HW; Intel; Juniper; Mellanox; NETGEAR

Compatible P/N:: SFP-10G23-BX10 | 10km; SFP-10G23-BX10-I | 10km; SFP-10G32-BX10 | 10km; SFP-10G32-BX10-I | 10km; SFP-10G23-BX20 | 20km; SFP-10G23-BX20-I | 20km; SFP-10G32-BX20 | 20km; SFP-10G32-BX20-I | 20km; SFP-10G23-BX40 | 40km; SFP-10G23-BX40-I | 40km; SFP-10G32-BX40 | 40km; SFP-10G32-BX40-I | 40km; SFP-10G23-BX60 | 60km; SFP-10G23-BX60-I | 60km; SFP-10G32-BX60 | 60km; SFP-10G32-BX60-I | 60km; SFP-10G45-BX80 | 80km; SFP-10G54-BX80 | 80km; SFP-10G45-BX100 | 100km; SFP-10G54-BX100 | 100km

Shipping:

To Be Negotiated

Free Shipping

Can't deliver

to United States via {{now_chooseship?now_chooseship.name:''}}

Estimated delivery time : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} days. See details

5-Year Warranty 30-Day Returns 30-Day Exchange

Stock:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

Quantity:

( Min. Order {{detail_data.prodInfo.minimum_ordered_quantity}} )

undeliverable

Total Price:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Add to wish

Specifications

Specification
Videos
Matching Products
Download
Q&A
Customer Reviews

FS SFP-10G32-BX60-I Compatible LINK-PP 10G SFP+ Specifications

FS SFP-10G32-BX60-I Compatible LINK-PP maximizes fiber utilization by leveraging advanced bidirectional technology to transmit and receive data simultaneously over a single strand of single-mode fiber, delivering robust 10Gbps performance across a 60km span via a 1330nm-TX/1270nm-RX wavelength split, an industrial-grade temperature tolerance, and real-time DOM diagnostics with a simplex LC/UPC interface.

FS Part Number	SFP-10G32-BX60-I	Vendor Name	LINK-PP
Form Factor	SFP+	Max Data Rate	10.7Gbps
Wavelength	1330nm-TX/1270nm-RX	Max Cable Distance	60km
Connector	Simplex LC	Media	SMF
Transmitter Type	DFB	Receiver Type	APD
TX Power	-1 to +5dBm	RX Power	-20 to -6dBm
Receiver Sensitivity	-20dBm	Receiver Overload	-6dBm
Operating Temperature Range	-40 to 85°C	Protocols	IEEE 802.3ae, SFF-8472, SFF-8431, 10GBASE-ZR/ZW

Videos

Matching Products

Pictures

ID#

Description

Price

Stock

Add to Cart

Download

Product Drawing

PDF
LS-BL332710-60I.pdf

Questions & Answers
Ask a Question

No data

Q: Can I link this module directly to another 1330nm-TX module on the opposite end of the single-fiber run? By R***l on 2026-02-17

A: No, BiDi transceivers must be deployed in pairs. You must pair this 1330nm-TX/1270nm-RX module with its matching counterpart (1270nm-TX/1330nm-RX) at the remote site. By admin on 2026-02-18
Q: How does the physical casing of this industrial-grade module handle heavy vibrations in roadside traffic cabinets or industrial environments? By T***d on 2026-01-11

A: It features a reinforced zinc alloy housing and a heavy-duty bail latch mechanism specifically designed to withstand structural vibrations and mechanical shock. By admin on 2026-01-12
Q: Our outdoor node enclosures reach up to 75°C in Arizona summers; will the 1330nm/1270nm center wavelengths drift and cause link flapping? By S***n on 2025-11-14

A: Not at all, as this is an industrial-grade BiDi optical transceiver rated up to 85°C that utilizes temperature-stabilized lasers to prevent spectral drifting under extreme heat. By admin on 2025-11-15
Q: If our network monitoring system catches a severe drop in RX power via DOM, does that indicate module failure or line attenuation? By U***e on 2025-07-28

A: An isolated drop in RX power while TX power remains steady almost always points to fiber micro-bends, cable degradation, or dust contamination at the patch panel. By admin on 2025-07-29

Customer Reviews
Write a Review

{{stardata.star}}

{{comment.count}} reviews
5 Stars

{{comment.star5}}%

4 Stars

{{comment.star4}}%

3 Stars

{{comment.star3}}%

2 Stars

{{comment.star2}}%

1 Star

{{comment.star1}}%

All Reviews ({{comment.star_num?comment.star_num:comment.count}})

All Reviews

5 stars only

4 stars only

3 stars only

2 stars only

1 star only
Reviews with Pictures ( {{comment.pic_comment}} )
See All Reviews

No data

B***n

Republic of Korea

Verified Purchase

5 .0

2026-04-23

Amazing 60km BiDi optical modules, saved us a ton of fiber strands in our campus backbone.

27 Helpful vote Comments

A***w

Nepal

Verified Purchase

5 .0

2026-04-16

Smooth deployment for our 5G cell tower backhaul trial. The simplex LC single-mode configuration is exactly what we needed to minimize termination points in the field. LINK-PP support was also very helpful with the compatibility check.

46 Helpful vote Comments

A***e

Macao

Verified Purchase

5 .0

2026-03-20

Arrived quickly, DOM metrics are precise and matching our fluke tester.

12 Helpful vote Comments

J***n

Malaysia

Verified Purchase

5 .0

2026-02-14

Great value for long-range enterprise networking. Our fiber link budget was quite tight at 52km, but these 60km rated modules handled the attenuation perfectly. Latency is extremely low and the simplex LC setup is clean.

46 Helpful vote Comments

G***n

Libyan Arab Jamahiriya

Verified Purchase

5 .0

2026-01-25

Simplex LC interface fits tight and secure. No packet drops at all.

36 Helpful vote Comments

H***d

Romania

Verified Purchase

5 .0

2025-10-09

We selected these industrial-grade 60km SFP+ BiDi optics to upgrade our substations' communication backbone. Our environment experiences severe electromagnetic interference and ambient temperatures ranging from -30°C in winter to 45°C in summer. The Simplex LC/UPC interface allows clean termination inside compact splice trays. We integrated these units with our switches; the OS pulled the DOM metrics flawlessly, showing accurate laser temperature, bias current, and VCC voltage. Having a reliable 10Gbps uplink over 47km of single-mode fiber without active cooling at the remote site is a game changer for our field operations. Highly recommended for heavy utility and industrial automated networks.

157 Helpful vote Comments

L***n

Singapore

Verified Purchase

4 .0

2025-08-18

Excellent LS-BL332710-60I modules for our 50km link. My only complaint is that the plastic protective caps on the LC interface were a bit loose in the bag. The optics themselves are flawless and DOM readings are spot on.

28 Helpful vote Comments

R***d

Maldives

Verified Purchase

5 .0

2025-08-06

Ordered a batch of these LS-BL332710-60I BiDi SFP transceivers for a rural broadband backhaul project. The 60km reach over single-mode fiber is rock solid, and using a simplex LC connector saved us from leasing extra fiber. So far, the throughput is stable at 10G.

45 Helpful vote Comments

A***r

United States

Verified Purchase

5 .0

2025-07-22

Our network engineering team tested these in our validation lab before field deployment. Jitter and latency figures are identical to premium-tier optics. Very impressed with LINK-PP's quality control standards.

25 Helpful vote Comments

D***e

Netherlands

Verified Purchase

5 .0

2025-06-03

These LS-BL332710-60I modules helped us double our bandwidth without laying new fiber cables. The BiDi technology is a lifesaver for leased dark fiber lines. Excellent build quality and the latch mechanism feels robust.

75 Helpful vote Comments

G***n

Poland

Verified Purchase

5 .0

2025-05-27

Deployed 10 pairs of these BiDi SFP optical modules for an enterprise metro-ethernet ring. They have been running flawlessly through heavy rainstorms and temperature drops. LINK-PP is now our go-to for specialized optical modules.

114 Helpful vote Comments

F***n

Morocco

Verified Purchase

5 .0

2025-04-30

Excellent optical power budget, hitting full 10Gbps over our 50km link easily.

54 Helpful vote Comments

L***n

Sweden

Verified Purchase

5 .0

2025-04-06

We run a regional WISP network and use these 10G 60km SFP+ BiDi modules for our tower-to-tower backhauls. Tower tops get incredibly hot during summer and freeze up in winter, so commercial-grade optics are out of the question. The industrial wide-temp design on these modules keeps the wavelength strictly locked at 1330nm/1270nm without drifting under thermal stress, which is vital for maintaining a stable link budget over 55km single-mode spans. We paired these with our routers, and they read out all diagnostic parameters natively. The Simplex LC polish provides excellent return loss characteristics. Fantastic engineering work by LINK-PP.

125 Helpful vote Comments

D***y

Romania

Verified Purchase

5 .0

2024-05-28

Great website. Great selection of products. Great prices. Fast processing of orders.

82 Helpful vote Comments

J***d

Finland

Verified Purchase

5 .0

2024-04-25

Good price and Fast service. This is the first time we used you and we will come back. Thanks.

57 Helpful vote Comments

D***c

Romania

Verified Purchase

5 .0

2023-10-02

Plugged two of these 10/25/40G Transceiver Modules into my switche and they worked right away, very satisfied.

73 Helpful vote Comments

J***o

United States

Verified Purchase

5 .0

2023-06-25

The shipping is Fast. I received the products within 10 days, amazing speed! The products were well packaged and worked fine during the past weeks. Glad to find LINK-PP, such a great website. Will definitly come back.

96 Helpful vote Comments

P***s

Austria

Verified Purchase

5 .0

2023-06-21

The website was easy to navigate, and the checkout process was easy.

102 Helpful vote Comments

Y***a

Taiwan, Province of China

Verified Purchase

5 .0

2023-06-08

Very good price and low shipping cost compared to all other vendors for the product ordered.

56 Helpful vote Comments

G***z

Italy

Verified Purchase

5 .0

2023-05-06

I think the 100G QSFP28 LR4 1310nm 10km SMF Optical Transceiver Module from l-p.com are great and their prices are competitive with anyone online. I'm more than happy with the transceivers I received.

39 Helpful vote Comments

J***R

United States

Verified Purchase

5 .0

2023-04-17

Excellent experience! Part ordered exactly as described, works perfectly, and was delivered the same day. Will use Link-PP again!

48 Helpful vote Comments

K***e

United States

Verified Purchase

5 .0