SFP-10GDWZR-61-I is a 10GBASE-DWDM SFP+ transceiver operating at 1528.77nm on channel C61, supporting data rates up to 10.7Gbps and transmission distances of up to 80km over SMF using a cooled EML laser and APD photodiode. It supports real-time digital diagnostic monitoring and operates within a case temperature range of -40°C to +85°C.
หมายเลขชิ้นส่วน MRV
SFP-10GDWZR-61-I
ชื่อผู้ขาย
LINK-PP
ฟอร์มแฟกเตอร์
SFP +
อัตราข้อมูลสูงสุด
10.7Gbps
ความยาวคลื่น
1528.77nm
ระยะทางสายเคเบิลสูงสุด
80km
เชื่อมต่อ
LC แบบดูเพล็กซ์
ภาพบรรยากาศ
SMF
ประเภทเครื่องส่งสัญญาณ
EML
ประเภทตัวรับ
APD
TX Power
-1 ถึง + 5dBm
อาร์เอ็กซ์ พาวเวอร์
-23 ถึง -6dBm
เครื่องรับความไวแสง
-23dBm
ดีดีเอ็ม/ดีโอเอ็ม
ที่สนับสนุน
ช่วงอุณหภูมิ
-40 ถึง + 85 ° C
โปรโตคอล
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of MRV SFP-10GDWZR-61-I Compatible LINK-PP 10G SFP +
MRV SFP-10GDWZR-61-I เข้ากันได้ LINK-PP module is an industrial-grade DWDM SFP+ transceiver designed for 80km transmission over single-mode fiber, operating at 1528.77nm on C61 with 100GHz channel spacing. It combines 10Gbps connectivity, DWDM technology, a duplex LC interface, and real-time digital diagnostic monitoring for long-distance optical networks.
The module features a hot-pluggable SFP+ footprint, complies with the SFP+ MSA, and operates from a single +3.3V power supply. Its industrial-grade design supports an operating case temperature range of -40°C to +85°C for use in environments with varying temperature conditions.
SFP-10GDWZR-61-I: 10 Gbps Connectivity for Metro Optical Networks
With support for data rates up to 10.7Gbps, this DWDM transceiver enables 10Gbps optical connectivity for metro transport networks. It supports the transmission of Ethernet and other compatible 10G optical signals across metropolitan fiber infrastructure.
SFP-10GDWZR-61-I Module with DWDM Technology for Fiber Efficiency
DWDM technology allows multiple optical signals at different wavelengths to travel over the same fiber, reducing the need for additional fiber connections. The module uses a 100GHz channel grid and can operate with compatible DWDM multiplexers and demultiplexers to improve fiber utilization.
SFP-10GDWZR-61-I Module with 1528.77nm Wavelength
The module operates at a center wavelength of 1528.77nm, corresponding to DWDM channel C61 on the ITU-T frequency grid. This fixed wavelength allows the module to be paired with optical equipment and wavelength channels configured for C61.
A cooled EML laser and APD photodiode enable this SFP+ DWDM transceiver to support transmission distances of up to 80km over single-mode fiber. This optical configuration is designed for long-distance links where signal transmission and receiver sensitivity are important.
SFP-10GDWZR-61-I Module with Duplex LC Interface
The duplex LC interface provides separate optical connections for transmitting and receiving data over two single-mode fibers. Its compact connector design allows the module to connect to compatible fiber patch cords and optical network equipment.
SFP-10GDWZR-61-I Module with DDM for Real-Time Monitoring
Digital Diagnostic Monitoring (DDM) provides real-time access to operating parameters, including module temperature, laser bias current, supply voltage, transmit optical power, and receive optical power. These diagnostic readings help network administrators monitor transceiver status and identify potential optical link issues.
MRV SFP-10GDWZR-61-I เข้ากันได้ LINK-PP SFP+ module undergoes quality testing and verification processes, supported by LINK-PP's ISO 9001 quality management system and applicable CE, RoHS, and FCC compliance requirements, to help ensure consistent product quality and reliable operation.
Each 10G DWDM transceiver undergoes functional testing, transmission stability checks, and industrial temperature verification to ensure consistent quality and dependable operation before shipment.
SFP-10GDWZR-61-I Quality Certifications
Quality documentation and compliance verification help confirm that the module meets applicable industry requirements for product safety, environmental compliance, and manufacturing quality.
การรับรอง UL เป็นการรับรองที่ไม่บังคับในสหรัฐอเมริกา โดยส่วนใหญ่ใช้เพื่อทดสอบและรับรองประสิทธิภาพความปลอดภัยของผลิตภัณฑ์ จุดประสงค์หลักคือเพื่อให้ได้ผลิตภัณฑ์ที่มีระดับความปลอดภัยพอสมควรสำหรับตลาด และเพื่อมีส่วนสนับสนุนในการรับรองสุขภาพของมนุษย์และความปลอดภัยของทรัพย์สิน ติดต่อเรา เพื่อเรียนรู้เพิ่มเติม
SFP-10GDWZR-61-I Certified for Reliable Host-Device Compatibility
This 10G SFP+ DWDM transceiver is designed and tested for compatibility with supported host devices, helping ensure proper module recognition, stable 10G data transmission, and reliable operation in compatible network equipment.
The SFP-10GDWZR-61-I DWDM SFP+ module undergoes optical spectrum, eye pattern, bit error rate, and temperature testing to verify stable 10G transmission and compliance with specified operating requirements. Learn more about our testing procedures at the LINK-PP ศูนย์สนับสนุนการทดสอบ
การทดสอบสเปกตรัมแสง
Verify C61 wavelength accuracy and spectral stability during optical transmission.
การทดสอบรูปแบบตา
Evaluate signal clarity and timing quality during 10G data transmission.
การทดสอบอัตราข้อผิดพลาดบิต
Measure transmission errors to verify reliable 10G data signal integrity.
ทดสอบอุณหภูมิ
Verify stable module operation across industrial temperature ranges during testing.
Product Shipping for MRV SFP-10GDWZR-61-I Compatible LINK-PP 10G SFP +
LINK-PP provides protective packaging and reliable shipping services for the SFP-10GDWZR-61-I DWDM SFP+ transceiver to help ensure safe delivery. With efficient order processing and international logistics support, customers can receive their modules conveniently across different regions.
บรรจุภัณฑ์ป้องกันไฟฟ้าสถิต
Protect sensitive electronic components from static electricity during product handling.
ระบบป้องกันการขนส่งที่ทนทานต่อแรงกระแทก
Reduce potential damage from shocks and vibrations during product transportation.
ดำเนินการและจัดส่งคำสั่งซื้ออย่างรวดเร็ว
Process customer orders efficiently and arrange timely dispatch for delivery.
โลจิสติกส์ระดับโลกและการจัดส่งระหว่างประเทศ
Support international shipments through coordinated logistics services across global markets.
Insert the SFP-10GDWZR-61-I DWDM transceiver into a supported SFP+ slot and connect the transmit and receive fibers to the corresponding C61 ports of a DWDM Mux/Demux system. Establish the optical path between network sites, then check 10G link connectivity for metro optical network applications.
The LS-DW6110-80I requires single-mode fiber terminated with duplex LC/UPC connectors. Before deployment, please verify end-to-end fiber polarity and ensure your total route attenuation—including MUX/DEMUX loss—stays within the 80km optical power budget. by LINK-PP Technical Support
Yes, built-in DDM/DOM diagnostics provide real-time visibility into low receive power and abnormal thermal or voltage conditions across your 80km link. If Rx power drops below the expected budget, verify your fiber path loss, LC end-face cleanliness, inline passive optics, and far-end Tx power prior to swapping hardware. by LINK-PP Technical Support
They operate on adjacent ITU-T 100GHz channels: C60 is tuned to 1529.55nm, while the LS-DW6110-80I (C61) is tuned to 1528.77nm. Always select the wavelength required by your DWDM channel plan and verify that both your MUX/DEMUX and remote-end optics match that channel. by LINK-PP Technical Support
Our operations team wants diagnostic visibility into links at remote locations. DDM/DOM can provide useful optical readings through compatible host equipment, helping us investigate receive-power changes before arranging an on-site inspection.
Our team is considering this transceiver for a remote network cabinet. The -40°C to +85°C rating suits our environment, and DDM/DOM gives our technicians useful information when reviewing optical levels and module temperature.
Thailand · Thai · THB
