SFP-10GDWZR-38-I functions as a fixed-wavelength 10GBASE-DWDM SFP+ transceiver centered at 1546.92nm (Channel C38), delivering scalable connectivity at line rates up to 10.7Gbps. Equipped with a cooled EML transmitter and APD photodetector to bridge single-mode optical links up to 80km, this industrial-grade transceiver module features integrated digital optical diagnostics and operates reliably from -40°C to +85°C.
MRV SFP-10GDWZR-38-I เข้ากันได้ LINK-PP integrates a 1546.92nm C38 optical design, 80km single-mode reach, and real-time DOM monitoring into an industrial-rated transceiver built for harsh temperature extremes from -40°C to +85°C. This makes it an ideal plug-and-play solution for scalable 10G long-haul aggregation and fiber-constrained networks.
The transceiver features a hot-pluggable SFP+ footprint fully compliant with SFP+ MSA hardware standards. Running on a single +3.3V power supply, it simplifies in-field installation and maintenance without interrupting host system uptime.
SFP-10GDWZR-38-I: 10 Gbps Connectivity for Dense Optical Aggregation
Dedicated 10GBASE-DWDM serial interfaces deliver a continuous 10Gbps line rate across high-density aggregation switches and optical distribution nodes. This architecture allows service providers to consolidate multiple client links into dense metro rings without consuming additional physical fiber pairs.
Dense wavelength division multiplexing splits multi-channel optical signals across a tight 100GHz ITU channel spacing to multiply link capacity. By transporting multiple independent streams over a single physical path, it substantially reduces raw fiber leasing expenses.
Channel C38 transmission operates at a precise 1546.92nm center wavelength using an integrated cooled EML laser. This precise spectral alignment ensures zero adjacent-channel crosstalk and maintains strict frequency stability across dynamic industrial temperature swings.
Long-distance reach spans up to 80km over standard G.652 single-mode fiber (SMF) via an internal high-sensitivity APD photodetector. The optical design maintains an adequate power link budget, effectively overcoming chromatic dispersion over extended metro ring routes.
Dual optical LC receptacles accommodate standard duplex SMF patch cables to establish isolated transmit (Tx) and receive (Rx) paths. The secure latching housing prevents accidental disconnects and delivers low insertion loss across high-density fiber patch panels.
โมดูล SFP-10GDWZR-38-I พร้อม DOM สำหรับการตรวจสอบแบบเรียลไทม์
Internal diagnostic circuitry continuously monitors internal transceiver temperature, supply voltage, laser bias current, and Rx/Tx optical power via standard two-wire serial communication. Host systems leverage this real-time telemetry to assess fiber link degradation and ensure consistent optical budget compliance.
MRV SFP-10GDWZR-38-I เข้ากันได้ LINK-PP DWDM SFP+ transceivers are manufactured under ISO 9001 quality systems and fully satisfy CE, RoHS, and FCC compliance standards.
Strict factory inspection confirms that each 10G SFP+ DWDM module delivers precise ITU-grid frequency matching and error-free 10G data transmission over 80km.
ใบรับรองคุณภาพ SFP-10GDWZR-38-I
Official hardware and environmental certifications validate that the DWDM SFP+ transceiver meets stringent laser safety, low electromagnetic emissions, and hazardous material limits.
Extensive EEPROM coding and physical port validation ensure reliable recognition and link training across major SFP+ switch and optical transport platforms.
Each SFP-10GDWZR-38-I 10G DWDM transceiver undergoes strict testing to verify ITU-grid frequency stability and optical transmission integrity. Review our detailed validation procedures through the LINK-PP ศูนย์สนับสนุนการทดสอบ
การทดสอบสเปกตรัมแสง
Verify central wavelength accuracy to prevent adjacent DWDM channel crosstalk.
การทดสอบรูปแบบตา
Evaluate optical transmitter waveform clarity to confirm standard mask compliance.
การทดสอบอัตราข้อผิดพลาดบิต
Ensure error-free 10G signal transmission over 80km single-mode fiber links.
ทดสอบอุณหภูมิ
Confirm stable optical performance across -40°C to +85°C industrial operating conditions.
Each SFP-10GDWZR-38-I 10G DWDM SFP+ transceiver is securely packaged to prevent physical damage during transit. Fast warehouse handling ensures your order ships out quickly to any destination.
บรรจุภัณฑ์ป้องกันไฟฟ้าสถิต
Prevent electrostatic discharge damage to internal components during handling stages.
ระบบป้องกันการขนส่งที่ทนทานต่อแรงกระแทก
Protect optical modules from physical drops and sudden vibrations in transit.
ดำเนินการและจัดส่งคำสั่งซื้ออย่างรวดเร็ว
Prepare and dispatch orders quickly to minimize waiting times for customers.
โลจิสติกส์ระดับโลกและการจัดส่งระหว่างประเทศ
Deliver optical shipments safely to customers in destinations around the world.
Slide the SFP-10GDWZR-38-I 10G DWDM transceiver directly into any compatible SFP+ slot and attach standard LC patch cables. Designed for dense optical aggregation, this DWDM SFP+ module connects smoothly to optical multiplexing systems, allowing network engineers to consolidate high-density data streams across central aggregation hubs and regional distribution centers.
Yes. This transceiver supports DOM/DDM and reports real-time RX/TX optical power, temperature, supply voltage, and laser bias current. A compatible switch with DOM enabled can make these readings available through SNMP or CLI for display in your network monitoring dashboard. by LINK-PP Technical Support
Yes. The module uses the C38 channel at 1546.92 nm on the 100 GHz DWDM grid and can connect to the C38 port of a compatible passive DWDM MUX/DEMUX through a duplex LC/UPC single-mode patch cable. by LINK-PP Technical Support
Yes. The module is hot-swappable and can be inserted or removed while the switch is powered on; other ports are not affected. Traffic on this specific port will stop during the swap, so ensure redundancy or schedule a maintenance window for critical links. by LINK-PP Technical Support
Yes, standard blue LC/UPC duplex single-mode patch cables can be used with this module. Use clean single-mode fiber and do not mate LC/APC connectors directly to the LC/UPC port. by LINK-PP Technical Support
Absolutely. Clean, contaminant-free fiber end faces help maintain low insertion loss and stable optical power on long-distance links. Inspect and clean both the transceiver port and LC patch-cable end faces with proper fiber-optic cleaning tools before insertion. by LINK-PP Technical Support
Bought a batch of these industrial-grade 1546.92nm DWDM SFP+ transceivers for a campus fiber upgrade. No MSA vendor warnings and perfectly stable 10G duplex LC links.
We needed an 80km SFP+ SMF module for a massive university network expansion. These DWDM transceivers beat OEM pricing by a mile. Real-time DOM tracking allows us to monitor the -23 to -6dBm RX power accurately. Absolutely solid performance.
Flawless 100GHz channel spacing. Popped it into our data center core switch and the 1546.92nm link came up immediately. Excellent DWDM SFP+ transceiver. :-)
I am a sysadmin for an energy company. We deployed 20 of these C38 10G DWDM SFP+ industrial optical modules at various remote substations. The wide -40 to +85°C operating temperature is a lifesaver. The APD receiver locks onto the 1546.92nm signal flawlessly over our 75km SMF backbone.
Thailand · Thai · THB
