DWDM-SFP10G-38.19-80-I 10GBASE-DWDM SFP+ transceiver is engineered with a 100GHz ITU C49 (1538.19nm) wavelength channel and duplex LC interfaces to support 10Gbps data transmission over single-mode fiber up to 80km. Operating across a wide industrial temperature range of -40°C to 85°C, it integrates digital optical monitoring (DOM) to deliver stable signal integrity for demanding metro DWDM deployments.
H3C DWDM-SFP10G-38.19-80-I เข้ากันได้ LINK-PP module is an industrial DWDM SFP+ module built to send 10G signals across long distances up to 80km. It helps maximize fiber lines through DWDM technology and monitors connection health in real time to prevent network downtime.
The optical transceiver operates within an industrial temperature range of -40°C to 85°C to ensure stable signal continuity in uncontrolled environments. Compliant with SFF-8431 standards, the compact hot-pluggable design fits directly into standard SFP+ switch and router ports.
DWDM-SFP10G-38.19-80-I: 10 Gbps Connectivity for Long-Haul Metro Edge
A stable 10Gbps transmission rate supports heavy data traffic across extended metro connections without speed drops. Uncompressed throughput keeps daily packet forwarding steady between local aggregation hubs.
Dense wavelength division multiplexing enables multiple discrete optical channels to propagate concurrently over a single physical fiber strand. Channel isolation minimizes spectral crosstalk, allowing operators to scale existing infrastructure without installing new dark fiber.
Channel 49 emission operates at a calibrated 1538.19nm center wavelength aligned with the standard 100GHz ITU-T grid. The cooled laser design keeps wavelength drift within tight tolerances to prevent adjacent-channel interference across multiplexer passbands.
An engineered optical link budget provides sufficient optical power and receiver sensitivity to span single-mode distances up to 80km. Stable optical margin minimizes signal degradation caused by chromatic dispersion and cumulative fiber attenuation over extended spans.
Standardized duplex LC optical receptacles provide secure, mechanical push-pull latching for single-mode patch cords. Precision internal ferrule alignment preserves low optical return loss and limits insertion loss across every physical mating cycle.
โมดูล DWDM-SFP10G-38.19-80-I พร้อม DOM สำหรับการตรวจสอบแบบเรียลไทม์
Digital optical monitoring function continuously reports operating parameters including TX power, RX power, supply voltage, laser bias current, and operating temperature. Direct access via the 2-wire I²C interface allows network managers to isolate physical link anomalies before an outage occurs.
H3C DWDM-SFP10G-38.19-80-I เข้ากันได้ LINK-PP 10G DWDM optical transceiver complies with strict international manufacturing and safety standards, holding official certifications including ISO 9001, CE, RoHS, and FCC.
Each SFP+ DWDM transceiver is thoroughly evaluated for wavelength stability, data transmission accuracy, and wide-temperature reliability prior to shipment.
ใบรับรองคุณภาพ DWDM-SFP10G-38.19-80-I
Official regulatory certifications confirm the optical module meets rigorous environmental, electromagnetic compatibility, and operational safety criteria.
Each DWDM-SFP10G-38.19-80-I DWDM module undergoes thorough laboratory verification to maintain stable wavelength accuracy and clean signal quality across long-haul fiber links. Explore detailed procedures and equipment standards by visiting the LINK-PP ศูนย์สนับสนุนการทดสอบ
การทดสอบสเปกตรัมแสง
Verify central wavelength precision to prevent DWDM channel crosstalk
LINK-PP ensures every DWDM-SFP10G-38.19-80-I 10G DWDM SFP+ transceiver is securely packed and promptly dispatched to maintain product integrity during transit. Reliable worldwide delivery services transport your networking hardware safely to its destination.
บรรจุภัณฑ์ป้องกันไฟฟ้าสถิต
Shield delicate transceiver electronics against electrostatic discharge damage.
ระบบป้องกันการขนส่งที่ทนทานต่อแรงกระแทก
Safeguard optical modules against physical impact and vibration during transit.
ดำเนินการและจัดส่งคำสั่งซื้ออย่างรวดเร็ว
Process orders rapidly to ensure timely parcel dispatch from warehouses.
โลจิสติกส์ระดับโลกและการจัดส่งระหว่างประเทศ
Coordinate with trusted freight carriers to ensure reliable worldwide delivery.
Insert the DWDM-SFP10G-38.19-80-I 10G SFP+ module into the switch port and connect clean duplex LC cables to your DWDM multiplexer. For long-haul metro edge links, ensure the port matches the assigned optical channel to aggregate edge traffic and send data cleanly over remote regional fiber.
Yes, when properly installed and used in compatible equipment. It meets Class 1 laser safety requirements. Do not look directly into optical ports or disconnected fiber ends, either with the naked eye or through optical instruments. by LINK-PP Technical Support
On a compatible switch, use DOM to check the module’s supply voltage reading. It should be within the specified operating range of 3.135 V to 3.465 V, with a nominal supply voltage of 3.3 V. by LINK-PP Technical Support
Yes. The TX and RX power readings have a specified accuracy of ±3 dB and are useful for routine checks and spotting significant changes. For more precise optical power measurements, use a calibrated power meter. by LINK-PP Technical Support
The LS-DW4910-80I has the diagnostic features our maintenance team prefers. Being able to view TX power, RX power, and module temperature through compatible equipment makes regular checks simpler.
We manage a private optical transport network for several logistics terminals. The LS-DW4910-80I fits our C49 wavelength assignment and provides a compact duplex LC interface for the aggregation switches. The cooled EML laser design is another useful feature for keeping the optical channel aligned in our DWDM system.
We are evaluating this industrial DWDM transceiver for an unmanned network shelter serving a renewable energy project. The wide temperature range is important because the shelter has limited cooling. Its compact SFP+ form factor, fixed C49 wavelength, and APD receiver all fit our proposed 10G transport design.
We maintain several equipment rooms across a large manufacturing campus. The network design uses 10G DWDM links to connect production buildings with the central data center. This 1538.19nm module fits our wavelength plan, while the duplex LC interface keeps the proposed patching arrangement straightforward :D
Thailand · Thai · THB
