DWDM-SFP10G-38.98-80-I is a 10GBASE-DWDM SFP+ optical module on ITU channel C48 at 1538.97nm, rated for 10.7Gbps across 80km of single-mode fiber through a duplex LC interface and built around a cooled EML laser paired with an APD photodiode. Digital diagnostic monitoring streams live optical power and temperature readings, and the module holds its specification over a -40 to +85°C operating temperature range.
H3C DWDM-SFP10G-38.98-80-I เข้ากันได้ LINK-PP DWDM SFP+ module connects distant network sites with high-capacity 10G data while maximizing existing fiber lines. This transceiver combines dense wavelength multiplexing with real-time operational diagnostics to deliver robust, high-capacity transport across demanding telecom environments.
The optical module is engineered with a hot-pluggable SFP+ footprint for seamless insertion into standard host ports without service disruption. Fully compliant with the SFP+ MSA, the hardware operates reliably on a single +3.3V power supply to ensure straightforward equipment compatibility.
DWDM-SFP10G-38.98-80-I: 10 Gbps Connectivity for Carrier Aggregation Sites
This DWDM transceiver delivers a sustained 10Gbps serial throughput to handle data-heavy uplink traffic smoothly. Telecom operators can deploy it directly at carrier aggregation hubs and mobile backhaul nodes to eliminate localized bandwidth bottlenecks.
Dense Wavelength Division Multiplexing enables multiple independent channels to transmit across one optical strand simultaneously. Network engineers can dramatically expand total link throughput without the high civil engineering costs of burying additional fiber cables.
A calibrated 1538.97nm center wavelength aligns precisely with ITU-T standard 100GHz grid spacing for channel 48 operations. This tightly controlled optical channel prevents crosstalk with neighboring frequencies in multi-channel DWDM systems.
An integrated cooled EML transmitter and sensitive APD receiver maintain a robust optical power budget to traverse spans up to 80km. Long-distance metro and regional networks achieve clear, low-bit-error data transport across extensive point-to-point fiber routes.
The optical port utilizes a standard duplex LC connector for secure, snap-in fiber patch connections. Low insertion loss and proven mechanical latching guarantee stable physical contact during high-density rack patching.
Digital Diagnostic Monitoring circuits track temperature, supply voltage, laser bias current, and transmit/receive optical power via the standard I²C interface. Network administrators can access these telemetry metrics to isolate fiber faults quickly and ensure stable transceiver operation over extended deployment periods.
H3C DWDM-SFP10G-38.98-80-I เข้ากันได้ LINK-PP 10G DWDM transceiver complies with global industry standards, including ISO 9001 quality management alongside CE, RoHS, and FCC certifications for safe electromagnetic emission and environmental compliance.
Every DWDM SFP+ module is thoroughly evaluated on the line for clean signal transmission, exact wavelength stability, and dependable performance across varied thermal environments.
ใบรับรองคุณภาพ DWDM-SFP10G-38.98-80-I
Global compliance certifications confirm the optical transceiver meets all legal requirements for environmental safety, electrical reliability, and signal isolation.
Standardized EEPROM programming and physical MSA conformance ensure the transceiver links immediately with host switches, routers, and transport gear without protocol mismatch.
Each DWDM-SFP10G-38.98-80-I 10G SFP+ DWDM module undergoes multi-stage factory verification to ensure error-free transmission across dense multi-channel 80km links. Learn more about our validation protocols at the LINK-PP ศูนย์สนับสนุนการทดสอบ
การทดสอบสเปกตรัมแสง
Measure 1538.97nm wavelength accuracy across the 100GHz DWDM grid.
การทดสอบรูปแบบตา
Check optical waveform clarity to ensure clean transmitter output.
การทดสอบอัตราข้อผิดพลาดบิต
Track data accuracy to prevent frame drops across long spans.
ทดสอบอุณหภูมิ
Test continuous transmission stability throughout industrial temperature ranges.
Every DWDM-SFP10G-38.98-80-I 10G SFP+ DWDM transceiver is securely packed and expedited to ensure safe arrival at your facility. Strict handling standards keep each parcel protected to maintain complete hardware integrity from dispatch to final delivery.
บรรจุภัณฑ์ป้องกันไฟฟ้าสถิต
Shield delicate electronic components against harmful electrostatic discharge during handling.
ระบบป้องกันการขนส่งที่ทนทานต่อแรงกระแทก
Protect optical hardware against mechanical shocks and sudden drops during transit.
ดำเนินการและจัดส่งคำสั่งซื้ออย่างรวดเร็ว
Handle order fulfillment swiftly to prevent unnecessary site deployment delays.
โลจิสติกส์ระดับโลกและการจัดส่งระหว่างประเทศ
Collaborate with reliable freight carriers for secure global order delivery.
Slide the DWDM-SFP10G-38.98-80-I 10G DWDM transceiver into an SFP+ switch slot and patch its duplex LC fiber directly into a DWDM Mux/Demux port. In carrier aggregation sites, this setup combines separate 10G optical channels onto one fiber pair, transporting concentrated cell-site traffic smoothly to metro core facilities.
Normally, no. The C48 DWDM module uses its own 1538.97nm wavelength. A compatible DWDM system can carry it alongside other channels when wavelength spacing and optical power levels are properly managed. by LINK-PP Technical Support
Delivery timing depends on stock availability, order quantity, and destination. Please share how many modules you need and where they will be delivered so we can check availability and provide an estimated delivery timeframe. by LINK-PP Technical Support
Its DDM/DOM function provides transmit power, receive power, and module temperature readings. You can view these values on a compatible switch and record them over time to help spot changes during routine network checks. by LINK-PP Technical Support
Yes, provided it remains within its rated operating temperature range of -40°C to +85°C. Ensure the host equipment stays within its own operating limits and the cabinet provides adequate environmental protection. by LINK-PP Technical Support
The SFF-8472 diagnostic support fits our monitoring requirements. Checking receive power and module temperature through compatible switches should help our technicians identify possible optical issues.
We selected this C48 DWDM SFP+ module for a new campus network. The fixed 1538.97nm wavelength fits our channel plan, and the duplex LC interface works with our existing fiber patch panels.
Our engineering team is designing a private fiber network for a large distribution campus. The C48 channel allows us to plan another 10G service over the existing DWDM infrastructure. Its duplex LC interface and SFP+ footprint also match the equipment already selected for the project.
Our test lab is building a DWDM connection between a server rack and a remote NAS storage system. The LS-DW4810-80I provides the 1538.97nm wavelength required by our multiplexer. We also like having digital diagnostics available to review optical power while testing network traffic :-)
Our telecom operations team wanted clearer optical power specifications for a new regional transport route. The module's -1 to +5dBm transmit range and -23dBm receiver sensitivity help us prepare the link budget. The SFF-8472 monitoring support is another useful feature for checking optical conditions during operation.
Thailand · Thai · THB
