LS-MM858G-S3I is an 8G Fibre Channel transceiver module operating at an 850nm wavelength and supporting data rates up to 8.5Gbps. Featuring a VCSEL transmitter and PIN photodiode receiver, it enables link lengths up to 300m over OM3 multimode fiber alongside real-time digital optical monitoring (DOM) for diagnostic tracking.
LINK-PP ส่วนจำนวน
LS-MM858G-S3I
ชื่อผู้ขาย
LINK-PP
ฟอร์มแฟกเตอร์
SFP +
อัตราข้อมูลสูงสุด
8.5Gbps
ความยาวคลื่น
850nm
ระยะทางสายเคเบิลสูงสุด
300m
เชื่อมต่อ
LC แบบดูเพล็กซ์
ภาพบรรยากาศ
MMF
ประเภทเครื่องส่งสัญญาณ
VCSEL
ประเภทตัวรับ
PIN
TX Power
-6.0 ถึง -0.5dBm
อาร์เอ็กซ์ พาวเวอร์
-16 ถึง -1dBm
เครื่องรับความไวแสง
-10.5dBm
ดีดีเอ็ม/ดีโอเอ็ม
ที่สนับสนุน
ช่วงอุณหภูมิ
-40 ถึง 85 ° C
โปรโตคอล
ได้มาตรฐาน MSA
คุณสมบัติหลักของ LINK-PP LS-MM858G-S3I 8G SFP+
LINK-PP LS-MM858G-S3I is an industrial-grade 8G Fibre Channel transceiver engineered for robust data links in demanding network environments. Equipped with a duplex LC interface and 300m transmission capability, it enables stable storage network interconnections across wide industrial operating temperatures.
LINK-PP โมดูลออปติคอล LS-MM858G-S3I 8G SFP+
The hot-pluggable SFP+ footprint allows network technicians to install or replace modules without interrupting host system power. Full compliance with the SFP+ MSA guarantees straightforward mechanical fit and broad hardware interoperability across multi-vendor platforms.
LS-MM858G-S3I: 8 Gbps Connectivity for Industrial Storage Networks
Operating at line rates up to 8.5Gbps, this SFP+ module ensures smooth, low-latency traffic flow across demanding storage area networks. Such transmission speeds reliably support mission-critical SAN arrays, local industrial storage enclosures, and automated enterprise backup servers.
An internal 850nm VCSEL transmitter provides the precise optical emission profile required for short-range signaling. This designated spectral band works hand-in-hand with multi-mode fiber cores to achieve optimal signal integrity while keeping power consumption low.
Link distances of up to 300m over OM3 multi-mode fiber accommodate extended cabling pathways across equipment rooms. Such physical reach easily connects distributed server clusters and storage cabinets across large factory floors or multi-floor enterprise buildings.
The industry-standard duplex LC optical receptacle ensures secure, low-loss latching with standard fiber patch cords. The compact dual-fiber connector geometry helps administrators maximize port density on crowded switch faceplates.
โมดูล LS-MM858G-S3I พร้อม DOM สำหรับการตรวจสอบแบบเรียลไทม์
Built-in digital optical monitoring (DOM) functions conform strictly to the SFF-8472 diagnostic standard for real-time telemetry. Network operators can continually track critical internal operating conditions like optical power, supply voltage, laser bias current, and temperature.
LINK-PP LS-MM858G-S3I การรับรอง 8G SFP+
LINK-PP LS-MM858G-S3I 8G SFP+ optical module complies with strict international industry benchmarks, holding key ISO 9001, CE, RoHS, and FCC certifications to ensure environmental safety and operational excellence.
Every SFP+ 8G transceiver module passes comprehensive testing to confirm consistent signal integrity, electrical parameter stability, and reliable data delivery in harsh thermal environments.
ใบรับรองคุณภาพ LS-MM858G-S3I
These recognized quality approvals confirm that the transceiver meets rigid manufacturing standards and delivers dependable reliability for enterprise storage deployments.
Each 8G SFP+ module undergoes comprehensive factory inspections to verify exceptional optical consistency and continuous operational stability. Learn more about our detailed validation procedures at the LINK-PP ศูนย์สนับสนุนการทดสอบ
การทดสอบสเปกตรัมแสง
Measure central wavelengths to guarantee precise optical spectral output.
การทดสอบรูปแบบตา
Evaluate optical signal quality to eliminate severe waveform distortion.
การทดสอบอัตราข้อผิดพลาดบิต
Check data transmission integrity to confirm reliable packet delivery.
ทดสอบอุณหภูมิ
Assess wide thermal limits to maintain reliable optical link performance.
Every 8G SFP+ transceiver module is securely packaged to ensure complete physical integrity during international transit. Our streamlined logistics workflow enables swift dispatch and dependable delivery to worldwide enterprise destinations.
บรรจุภัณฑ์ป้องกันไฟฟ้าสถิต
Prevent electrostatic discharge to protect sensitive internal electronic components.
ระบบป้องกันการขนส่งที่ทนทานต่อแรงกระแทก
Reduce rough shipping shocks to keep delicate components safely intact.
ดำเนินการและจัดส่งคำสั่งซื้ออย่างรวดเร็ว
Accelerate order handling workflows to enable prompt warehouse dispatch schedules.
โลจิสติกส์ระดับโลกและการจัดส่งระหว่างประเทศ
Partner with global express couriers to guarantee dependable worldwide arrival.
LINK-PP การสาธิตการใช้งาน LS-MM858G-S3I 8G SFP+
Deploying the LS-MM858G-S3I transceiver module requires only sliding it into a host SFP+ port and snapping in optical cables. The module provides stable 8G Fibre Channel links across industrial storage networks, seamlessly linking central control units to remote factory storage devices.
A:
Yes, the bail-latch mechanism is built to standard MSA industrial specifications, providing a secure lock in standard SFP+ cages that prevents accidental dislodging from mechanical vibration. โดยผู้ดูแลระบบ
A:
Absolutely. This module is rated for an industrial operating case temperature of -40°C to +85°C, making it ideal for unheated enclosures and harsh environments. โดยผู้ดูแลระบบ
A:
Yes, it is fully backwards compatible with 4G and 2G Fibre Channel links and will step down speed automatically based on the remote host interface. โดยผู้ดูแลระบบ
Good choice for a short-reach storage network. We did not need expensive long-distance optics, just dependable 850nm multimode modules for links across the building. They were recognized normally and saved us time. :-D
Bought these for a data-center bulk deployment where we wanted consistent 8G FC optics across multiple racks. The modules performed well with our Duplex LC MMF plant, and DOM made acceptance testing faster. We would order again for future storage expansion.
Our virtualization cluster relies on stable SAN connectivity, so we tested the modules before rolling them out. TX and RX readings were within a healthy range on our 200m OM3 runs, and performance remained steady under backup traffic.
We use these in a controlled factory network cabinet, connecting storage-related equipment over multimode fiber. The -40 to 85°C operating range gave our operations team more confidence than regular commercial optics. The optical monitoring data also looks consistent.
We used these 8G FC SFP+ modules to refresh several older SAN links in a small data room. Every unit came online quickly, and the switch showed normal optical diagnostics. Good result for a straightforward MMF upgrade.
Reliable -40 to 85°C industrial performance on our storage network, but international courier delivery was delayed by two days. Otherwise, no complaints about the module.
This industrial 8G Fibre Channel transceiver solved a recurring issue with standard-temperature modules in one of our hotter rack zones. We can now monitor temperature, voltage, and optical levels through DOM, which makes preventive checks much easier.
We used these 850nm 300m SFP+ transceivers to connect a backup SAN array. The VCSEL transmitter and PIN receiver combo maintain a steady signal over existing OM3 multimode fiber lines.
Our IT team needed industrial-temperature SFP+ modules for a warm indoor telecom cabinet near production equipment. These have been reliable so far, even when cabinet temperatures rise. Easy replacement for the previous 8G FC optics. ;-)
Purchased for a campus server-room fiber expansion. The 8.5Gbps Fibre Channel performance is stable, and the DOM values help us check receive power without taking links offline. Nice for routine infrastructure work.
Deployed several LS-MM858G-S3I 8G SFP+ modules during a SAN maintenance window. Installation was quick, links recovered normally after patching, and there were no unusual CRC or link-reset events afterward. A practical industrial Fibre Channel SFP+ module.
We ordered these transceiver modules for a batch replacement project covering Fibre Channel storage links in two data rooms. All modules seated properly in the SFP+ cages and negotiated cleanly with our compatible equipment. No intermittent alarms after deployment.
Replaced an older failing optic with this LS-MM858G-S3I SFP+ transceiver in our SAN fabric. Negotiation at 8Gbps was immediate and optical power levels sit cleanly within spec. :)
We needed a 300m multimode Fibre Channel solution between an office server room and a nearby equipment space. These modules handled the route well. Optical power readings remained comfortably above the receiver sensitivity threshold during our checks.
Used in an indoor baseband equipment room where fiber jumpers run between cabinets. The VCSEL transmitter and PIN receiver combination has delivered steady traffic, and the LC ports fit our existing patch panels without any changes.
Good replacement optical transceivers for aging Fibre Channel infrastructure. We tested temperature reporting, transmit power, and receive power after installation, then left the links under regular workload for several weeks. Everything has remained stable, with no unexpected port drops.
Reliable 850nm SFP+ optics for indoor FC switching. The 300m reach gives us enough flexibility for separate server and storage rooms, while the small modules keep cable management simple. =)
Thailand · English · THB
