LS-SM316G-10I is an industrial-grade 6G SFP+ SMF transceiver module engineered with a 1310nm DFB laser and a PIN photodiode to deliver reliable optical links up to 10km over single-mode fiber. It features integrated real-time digital diagnostic monitoring (DDM) and supports an operating case temperature range of -40°C to +85°C for demanding deployment environments.
LINK-PP ส่วนจำนวน
LS-SM316G-10I
ชื่อผู้ขาย
LINK-PP
ฟอร์มแฟกเตอร์
SFP +
อัตราข้อมูลสูงสุด
6.25Gbps
ความยาวคลื่น
1310nm
ระยะทางสายเคเบิลสูงสุด
10km
เชื่อมต่อ
LC แบบดูเพล็กซ์
ภาพบรรยากาศ
SMF
ประเภทเครื่องส่งสัญญาณ
DFB
ประเภทตัวรับ
PIN
TX Power
-6.5 ถึง -0.5dBm
อาร์เอ็กซ์ พาวเวอร์
-20 ถึง -1dBm
เครื่องรับความไวแสง
-15dBm
ดีดีเอ็ม/ดีโอเอ็ม
ที่สนับสนุน
ช่วงอุณหภูมิ
-40 ถึง 85 ° C
โปรโตคอล
สอดคล้องกับ SFP+ MSA
คุณสมบัติหลักของ LINK-PP LS-SM316G-10I 6G SFP+
LINK-PP LS-SM316G-10I SFP+ module is built to provide stable optical connections across long distances, even in extreme environments. The module delivers reliable data transfer, standard plug-and-play compatibility, and continuous health tracking for your network.
LINK-PP LS-SM316G-10I 6G SFP+ Optical Module
This optical module uses a hot-pluggable SFP+ design, allowing you to install or replace it without turning off your switch. Because it follows standard SFP+ MSA guidelines, it fits seamlessly into a wide range of networking devices.
LS-SM316G-10I: 6 Gbps Connectivity for LTE Base Station Links
A high-speed 6Gbps data rate easily meets the bandwidth demands of LTE base stations and wireless mobile networks. It guarantees low delay and smooth data flow between baseband units and remote radio heads.
The 1310nm operating wavelength is ideal for standard single-mode optical fiber links. At this specific frequency, optical signals experience very little light distortion, keeping your data clean and reliable.
Transmission reaches up to 10km over standard single-mode fiber. This long operating distance lets you link distant telecommunication towers without using extra signal boosters.
Dual LC optical ports offer a secure, snap-in connection for regular fiber patch cables. The separated transmit and receive lines help prevent signal interference and make cable setup simple.
LS-SM316G-10I Module with DDM for Real-Time Monitoring
Digital diagnostic monitoring (DDM) lets engineers track operating temperature, supply voltage, laser bias current, and optical power in real time. Built to meet the SFF-8472 standard, it warns you immediately if a link issue occurs so you can fix it quickly.
LINK-PP LS-SM316G-10I 6G SFP+ Certification
LINK-PP LS-SM316G-10I 6G SFP+ module is fully certified under international standards such as ISO 9001, CE, RoHS, and FCC to ensure safety and quality. These credentials prove that the optical module meets strict environmental, electrical, and manufacturing regulations worldwide.
Every SFP+ optical module goes through rigorous optical and thermal stress tests before leaving the production line. This thorough process helps eliminate defects and guarantees long-term reliability in the field.
ใบรับรองคุณภาพ LS-SM316G-10I
These official credentials confirm that the transceiver module adheres to recognized industry production and safety benchmarks. Customers can trust that each module delivers consistent performance and meets all global deployment requirements.
Comprehensive compatibility verification ensures seamless operation with switches, routers, and base-station hardware from major networking brands. You can easily plug the transceiver into your existing equipment without encountering software errors or link failures.
Every 6G SFP+ optical transceiver undergoes comprehensive validation to ensure dependable data transmission across demanding field environments. Learn more about our testing details by visiting the LINK-PP ศูนย์สนับสนุนการทดสอบ
การทดสอบสเปกตรัมแสง
Measure central wavelength accuracy to maintain stable optical transmission.
การทดสอบรูปแบบตา
Evaluate optical signal quality to reduce unwanted jitter levels.
การทดสอบอัตราข้อผิดพลาดบิต
Check data transmission integrity to eliminate packet transmission loss.
ทดสอบอุณหภูมิ
Examine thermal cycle stability to ensure harsh environmental endurance.
LINK-PP LS-SM316G-10I 6G SFP+ optical modules are carefully packaged to guarantee safe delivery and immediate deployment upon arrival. Our streamlined fulfillment process ensures fast, secure handling for orders across the globe.
Absorb transit physical impacts to ensure complete hardware safety.
ดำเนินการและจัดส่งคำสั่งซื้ออย่างรวดเร็ว
Accelerate daily warehouse handling to speed up order shipments.
โลจิสติกส์ระดับโลกและการจัดส่งระหว่างประเทศ
Partner with reliable freight carriers to enable timely worldwide distribution.
LINK-PP LS-SM316G-10I 6G SFP+ Usage Demonstration
Connect the LS-SM316G-10I optical module by sliding it directly into the SFP+ cage until the latch clicks, then plug in your duplex LC fiber patch cable. It quickly establishes stable, low-latency 6Gbps optical links between baseband units and remote radio heads in LTE base stations.
A:
Yes, it supports bit rates up to 6.25Gbps, which covers standard CPRI Option 6 (6.144Gbps) connecting baseband units (BBU) to remote radio heads (RRH). โดยผู้ดูแลระบบ
A:
With a minimum TX power of -6.5dBm and a receiver sensitivity down to -15dBm, the available optical link budget is approximately 8.5dB under standard conditions. โดยผู้ดูแลระบบ
A:
Tight macrobends on single-mode patch cords increase optical attenuation; while 1310nm light is slightly more bend-tolerant than 1550nm, excessive bending can still exceed the receiver sensitivity threshold. โดยผู้ดูแลระบบ
A:
Yes, the module is built with an industrial operating case temperature rating of -40 to +85°C, so it handles freezing winter cold and extreme summer heat without dropping the link. โดยผู้ดูแลระบบ
We use this optical module in an industrial Ethernet switch for a long plant-floor uplink. It supports the data rate we need, and the SFP+ MSA format made it straightforward to integrate with our existing hardware.
Bought a batch for a municipal traffic fiber loop. The 1310nm wavelength performance over our single-mode fiber runs has been rock-solid, and hot-swapping into live SFP+ ports works smoothly without restarting the equipment.
The module works well in our industrial switch, but the courier box arrived with light corner wear. The inner antistatic packaging was secure, and the optic passed our field test.
Installed this industrial-grade 6G SFP+ in a roadside control cabinet. The link came up quickly over our existing single-mode fiber and has stayed stable.
We used these LS-SM316G-10I SFP+ modules to connect baseband units to antenna radios at a cellular tower site. The run is about 5km over outdoor single-mode fiber. The DFB laser gave us a strong signal, and the receiver sensitivity gave plenty of link room. Temperature stayed solid even in direct midday sun.
This LS-SM316G-10I SFP+ module fit a remote pumping-station network where the switch enclosure can run hot in summer and cold in winter. The 10km SMF reach covered our route, and the PIN receiver readings stayed within the expected range.
We installed several units for a distributed industrial control project. The 6.25Gbps capability was enough for our switch uplinks, while the -40 to 85°C operating range gave our procurement team more flexibility for cabinet locations.
We replaced older fiber modules in a manufacturing site with these 1310nm SFP+ transceivers. The DFB transmitter gave us stable link readings, while DOM helped our technicians compare Rx power after each replacement. ;-)
Our maintenance crew appreciated the DOM support during commissioning. We logged the Tx and Rx optical power at each cabinet, which gave us a useful baseline for checking the 1310nm fiber paths later.
Good industrial-grade SFP+ transceiver for a base station support link. It was installed in a cabinet that sees big seasonal changes, and the module has performed consistently.
Deployed one pair on a rail-side monitoring network with equipment located in protected field enclosures. The industrial operating range was useful for our environment, and the 6G link remained stable during the initial test period. :-D
We used this 1310nm optical transceiver for a factory network extension. The Duplex LC connection matched our patch panel, and DOM readings were easy to review. =D
We selected this industrial-grade 6G 1310nm SFP+ module for a batch deployment in network cabinets across a utility site. It provided stable fiber connectivity, and the DOM optical values helped us identify one dirty patch cord during installation. :-)
Thailand · English · THB
