Can this module be connected directly to regular single-mode fiber that is already installed in our network?

Yes. The LS-CW491G-80C 1G CWDM SFP is designed for single-mode fiber (SMF) and uses duplex LC connectors. It can be connected to standard single-mode fiber infrastructure, provided the fiber condition, connector quality, splice loss, and total link loss are within the optical power budget.

We are building an 80km CWDM ring. Do both ends of the link need to use 1490nm modules?

Yes. For a standard point-to-point duplex CWDM link, both ends should use the same 1490nm CWDM wavelength and compatible 1G SFP modules. If the link is carried through CWDM MUX/DEMUX equipment, make sure both modules are connected to the corresponding 1490nm channel ports.

Can this LS-CW491G-80C module be used with a CWDM MUX/DEMUX system, or is it only for direct fiber links?

It can be used in both scenarios. For a direct point-to-point link, connect two compatible 1490nm modules over duplex single-mode fiber. For a CWDM multiplexed network, connect the module to the 1490nm port of a compatible CWDM MUX/DEMUX to combine multiple wavelengths onto the same fiber pair.

Breadcrumb: Главная; Продукты; Оптика Трансиверы | SFP-модули; Модули приемопередатчиков 1/2/4G; 1G CWDM/DWDM SFP; 203282

Нажмите, чтобы открыть расширенный вид

LINK-PP LS-CW491G-80C 1G SFP CWDM 1490 нм 80 км дуплексный оптический трансивер LC DOM SMF

Name: LINK-PP LS-CW491G-80C 1G SFP CWDM 1490 нм 80 км дуплексный оптический трансивер LC DOM SMF
Brand: LINK-PP
SKU: 203282
Price: 43 USD
Availability: InStock
Rating: 4.9 (25 reviews)

# 203282

Продукт: LINK-PP LS-CW491G-80C 1G SFP CWDM 1490 нм 80 км дуплексный оптический трансивер LC DOM SMF
SKU: 203282
P / N: LS-CW491G-80C
Цена: $ 50
Сток: 98 в наличии
Продано: 812
URL-адрес продукта: https://www.l-p.com/products/492748.htm

При заказе на сумму более 1000 долларов получите скидку 15.00 долларов. Код: Linkpp15

При заказе на сумму более 3000 долларов получите скидку 50.00 долларов. Код: Linkpp50

При заказе на сумму более 5000 долларов получите скидку 100.00 долларов. Код: Linkpp100

Новым пользователям: купон на 10 долларов на заказы. Код: linkpp2610

: LINK-PP LS-CW491G-80C 1G SFP CWDM 1490 нм 80 км дуплексный оптический трансивер LC DOM SMF

25 Отзывы Нужна помощь?

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.value }}
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Quantity

25 отзывов

3 вопросов

Запросить запас

812 Продано

$ 50

Бесплатная доставка на сумму более 600 долларов США. Если вам нужна более выгодная цена, пожалуйста, свяжитесь с нами напрямую.

Кол-во (шт.):

Цена за единицу :

$ 50

100

$ 47.5

1000

$ 46

3000

$ 44.5

6000

$ 43

Производство: LINK-PP

P / N: LS-CW491G-80C

Совместимость:: Cisco; LINK-PP; Allied Telesis; Arista; Brocade; Ciena; Dell; Extreme; Juniper; Netgear

Длина волны:: 1270nm; 1290nm; 1310nm; 1330nm; 1350nm; 1370nm; 1390nm; 1410nm; 1430nm; 1450nm; 1470nm; 1490nm; 1510nm; 1530nm; 1550nm; 1570nm; 1590nm; 1610nm

Отправка и доставка:

Вести переговоры

Бесплатная доставка

Не могу доставить

в США с помощью {{now_chooseship?now_chooseship.name:''}}

Срок доставки : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} дней. Подробнее

5-летнюю гарантию 30-Day Returns 30-дневный обмен

Наличие на складе:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}.

Количество:

( Минимальный заказ {{detail_data.prodInfo.minimum_ordered_quantity}} )

сданным

Итоговая цена:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Добавить в пожелание

Характеристики

Параметр
Видео
Соответствующие продукты
Скачать
Вопросы и ответы
Отзывы клиентов

LINK-PP Технические характеристики LS-CW491G-80C 1G SFP

Разработанный специально для инфраструктур CWDM, модуль LS-CW491G-80C 1G SFP использует оптическую длину волны 1490 нм для максимального использования волоконно-оптического кабеля на больших расстояниях. Встроенный DFB-лазер и PIN-приемник обеспечивают стабильную целостность сигнала на одномодовых волоконно-оптических кабелях на расстоянии до 80 км. Интегрированная система цифрового оптического мониторинга (DOM) обеспечивает отслеживание в реальном времени выходной мощности, рабочей температуры, тока смещения и напряжения.

LINK-PP Номер детали	LS-CW491G-80C	Название поставщика	LINK-PP
Форм-фактор	SFP	Максимальная скорость передачи данных	1.25Gbps
Длина волны	1490nm	Максимальное расстояние кабеля	80km
соединитель	Дуплексный ЖК	Медиафайлы	SMF
Тип передатчика	DFB	Тип приемника	PIN-код
TX Power	От -1 до + 4 дБм	Мощность RX	От -26 до -1 дБм
Чувствительность приемника	-26dBm	приемник перегрузки	-1dBm
ЭМС (Электромагнитная связь)	Поддержанный	DOM	Поддержанный
Диапазон рабочих температур	0 до 70 ° C	протоколы	SFP MSA、SFF-8472

Видео

Соответствующие продукты

Картинки

МНЕ БЫ#

Описание

Цена

Сток

Добавить в корзину

Скачать

Чертеж устройства

PDF
LS-CWxx1G-80x.pdf

Вопросы и Ответы
Задать вопрос

Нет данных

Q: Can this module be connected directly to regular single-mode fiber that is already installed in our network? By I***t on 2026-02-03

A: Yes. The LS-CW491G-80C 1G CWDM SFP is designed for single-mode fiber (SMF) and uses duplex LC connectors. It can be connected to standard single-mode fiber infrastructure, provided the fiber condition, connector quality, splice loss, and total link loss are within the optical power budget. Администратор on 2026-02-04
Q: We are building an 80km CWDM ring. Do both ends of the link need to use 1490nm modules? Автор: Х***н on 2025-11-17

A: Yes. For a standard point-to-point duplex CWDM link, both ends should use the same 1490nm CWDM wavelength and compatible 1G SFP modules. If the link is carried through CWDM MUX/DEMUX equipment, make sure both modules are connected to the corresponding 1490nm channel ports. Администратор on 2025-11-18
Q: Can this LS-CW491G-80C module be used with a CWDM MUX/DEMUX system, or is it only for direct fiber links? Автор: J***l on 2025-04-21

A: It can be used in both scenarios. For a direct point-to-point link, connect two compatible 1490nm modules over duplex single-mode fiber. For a CWDM multiplexed network, connect the module to the 1490nm port of a compatible CWDM MUX/DEMUX to combine multiple wavelengths onto the same fiber pair. Администратор on 2025-04-22

Ещё

Отзывы клиентов
Написать отзыв

{{stardata.star}}

{{comment.count}} с отзывами
5 Звезды

{{comment.star5}}%

4 Звезды

{{comment.star4}}%

3 Звезды

{{comment.star3}}%

2 Звезды

{{comment.star2}}%

1 Star

{{comment.star1}}%

Все отзывы ({{comment.star_num?comment.star_num:comment.count}})

Все отзывы

Только 5 звезд

Только 4 звезд

Только 3 звезд

Только 2 звезд

Только 1 звезда
Обзоры с картинками ( {{comment.pic_comment}} )
Просмотреть все отзывы

Нет данных

I *** е

Великобритания

Подтвержденная покупка

5 .0

2026-06-14

Installed several LS-CW491G-80C modules in our CWDM ring — solid performance.

55 Полезный голос Комментарии

F *** г

ЮАР

Подтвержденная покупка

5 .0

2026-06-02

We installed these CWDM modules as part of a phased data-center edge refresh. The sites do not need 10G on every route, but they do require resilient, monitored 1G connectivity across long single-mode fiber runs. The 1490nm CWDM channel allowed us to retain existing MUX/DEMUX hardware while adding capacity without trenching new fiber. From an operations standpoint, DOM is the biggest benefit. We set monitoring thresholds around receive optical power and watched the results through our normal device-management workflow. During burn-in and traffic testing, the optics remained stable and there were no link flaps. The compact SFP form factor also made replacement simple in populated switch racks. Great balance of reach, diagnostics, and cost.

95 Полезный голос Комментарии

N *** п

Индия

Подтвержденная покупка

5 .0

2026-05-11

We ordered these for a CWDM MUX/DEMUX upgrade where 1490nm was the open channel. The LS-CW491G-80C CWDM modules came online quickly and held a stable 1.25Gbps link. Nice option for enterprise fiber networks that still run 1G aggregation.

88 Полезный голос Комментарии

W *** s

Российская Федерация

Подтвержденная покупка

5 .0

2026-04-05

We deployed LS-CW491G-80C 1G 1490nm CWDM SFP transceivers across a multi-building industrial campus. The longest installed route was just under 67km after accounting for the patch-panel path, splices, and CWDM MUX/DEMUX insertion loss. The 80km optical budget gave us the operational headroom we wanted rather than designing right at the limit. During commissioning, we checked the DDM/DOM readings from each endpoint and compared the reported TX/RX values against our optical test results. The modules reported consistent information, and the links stayed free of packet loss and CRC alarms under production traffic. For indoor equipment rooms with 0 – 70°C conditions, this is a dependable 1490nm CWDM SFP for 1G backbone expansion.

137 Полезный голос Комментарии

Q *** s

Нидерланды

Подтвержденная покупка

5 .0

2026-03-21

The DOM information was available in our monitoring platform, including TX/RX optical power and temperature. That is important for us because the fiber route is long and troubleshooting time is expensive. Happy with the module so far.

101 Полезный голос Комментарии

Т *** л

Италия

Подтвержденная покупка

5 .0

2026-02-16

We tested the module with multiple switch platforms in our lab before rolling it out. It was detected correctly, the link remained stable, and diagnostics were readable through the host interface. Good 1490nm CWDM optical module for the price.

100 Полезный голос Комментарии

G *** г

Япония

Подтвержденная покупка

5 .0

2026-02-03

DOM readings are clean and stable; exactly what our NOC needed.

74 Полезный голос Комментарии

К *** т

Канада

Подтвержденная покупка

5 .0

2026-01-27

Great value for an 80km CWDM SFP with digital optical monitoring.

77 Полезный голос Комментарии

V *** т

Сингапур

Подтвержденная покупка

5 .0

2025-12-18

Good alternative when you need a long-distance 1G CWDM SFP transceiver but do not want to redesign the entire optical network. We used it with Duplex LC single-mode fiber and a CWDM passive system. Traffic has been clean since installation.

115 Полезный голос Комментарии

M *** п

Бразилия

Подтвержденная покупка

5 .0

2025-12-04

Used this 1490nm CWDM SFP module to extend a 1GbE connection between two municipal facilities. The Duplex LC SMF connection was straightforward, and the 80km rating gave us enough margin for the route. DOM values matched our field meter closely.

92 Полезный голос Комментарии

F *** ч

США

Подтвержденная покупка

5 .0

2025-11-18

Reliable 1490nm 1G CWDM SFP for our 80km fiber path — linked right up.

61 Полезный голос Комментарии

I *** е

Новая Зеландия

Подтвержденная покупка

4 .0

2025-11-02

The LS-CW491G-80C SFP modules worked perfectly on our 1490nm CWDM 1G links, and DOM readings were available as expected. One outer shipping carton arrived slightly compressed, although every SFP was individually protected and passed our incoming test. Product performance is five-star; shipping presentation could be a bit better.

29 Полезный голос Комментарии

Z *** п

Таиланд

Подтвержденная покупка

5 .0

2025-10-23

Our application was a 1GbE backhaul link between a central server room and several remote telecom cabinets connected through a CWDM transport layer. The LS-CW491G-80C was selected because we specifically needed a commercial-grade 1490nm CWDM SFP with an 80km reach, Duplex LC connector, and DOM support — not a generic 1310nm optic. The installation team used standard LC single-mode jumpers and kept end-face cleaning procedures in place. The links came up immediately after wavelength verification. Over several weeks, receive levels remained comfortably above the -26dBm receiver sensitivity threshold, and the reported optical readings did not drift. This is a strong choice for enterprise CWDM fiber infrastructure where 1.25Gbps capacity is still appropriate.

156 Полезный голос Комментарии

Р *** г

Республика Корея

Подтвержденная покупка

5 .0

2025-10-08

We needed a 1G 1490nm CWDM 80km SFP optical transceiver for an indoor data-room-to-cabinet link. It worked over existing single-mode fiber with LC patch cords and showed usable receive margin. Good procurement experience overall.

83 Полезный голос Комментарии

S *** т

Испания

Подтвержденная покупка

5 .0

2025-09-02

This is a practical commercial-temperature 1G CWDM SFP for indoor telecom rooms. Optical levels stayed stable during normal load, and the PIN receiver sensitivity was sufficient for our long single-mode span. Would order again.

138 Полезный голос Комментарии

G *** s

Малайзия

Подтвержденная покупка

5 .0

2025-08-31

We bought this 1G 1490nm CWDM 80km SFP optical transceiver for a distributed video-surveillance and building-management network. Several remote locations share the same CWDM fiber infrastructure, so the exact wavelength and optical reach were non-negotiable. The LS-CW491G-80C matched the required 1490nm channel and provided enough transmitter power for our engineered path. Our field engineers verified the LC duplex polarity, cleaned every connector, and recorded baseline DOM data at turn-up. The RX levels were within the expected design range, and the modules maintained stable connectivity through regular traffic peaks. It is a commercial-temperature module, so we used it in conditioned indoor cabinets rather than exposed roadside enclosures. For that deployment profile, it has been reliable and easy to manage.

106 Полезный голос Комментарии

J *** е

Франция

Подтвержденная покупка

5 .0

2025-08-09

This 1.25G 1490nm CWDM SFP was recognized immediately and passed traffic overnight.

79 Полезный голос Комментарии

ООН

Норвегия

Подтвержденная покупка

5 .0

2025-07-25

Bought a mixed wavelength batch for a regional fiber ring, including this 1490nm 80km SFP. All modules were clearly separated by wavelength, which avoided installation mistakes. The DFB CWDM transmitter delivered consistent levels at commissioning.

82 Полезный голос Комментарии

O *** s

Мексика

Подтвержденная покупка

5 .0

2025-06-30

Purchased for a small batch of remote-site uplinks. The modules were properly labeled, seated well in standard SFP slots, and the DDM monitoring made acceptance testing much faster. No CRC errors after a week of traffic.

121 Полезный голос Комментарии

H *** п

Индонезия

Подтвержденная покупка

5 .0

2025-06-12

We evaluated this module for a mixed-vendor enterprise network where interoperability, documentation, and repeatability were more important than simply finding the lowest-cost optic. The LS-CW491G-80C CWDM SFP passed our lab checks for 1.25Gbps Ethernet transport, module recognition, and SFF-8472 digital diagnostics. We then rolled out a controlled batch to production locations. The 80km specification is valuable for long campus, metro-edge, and remote-site fiber routes, especially when CWDM channels are already allocated. The reported TX power range of -1 to +4dBm and receiver sensitivity down to -26dBm were aligned with our loss-budget calculations. After deployment, the modules have provided clean links and predictable DOM telemetry. That is exactly what we need for repeatable network maintenance.

119 Полезный голос Комментарии

R *** л

Швеция

Подтвержденная покупка

5 .0

2025-05-19

Our network team used these for a campus CWDM backbone migration instead of pulling additional fiber. The 1490nm channel fit our wavelength plan, and the 1.25G SFP interface kept the project compatible with existing aggregation hardware. Easy win.

92 Полезный голос Комментарии

H *** s

Германия

Подтвержденная покупка

5 .0

2025-04-22

Good fit for a Duplex LC single-mode fiber deployment, no drama.

52 Полезный голос Комментарии

J *** п

Бельгия

Подтвержденная покупка

4 .0

2025-04-07

Technically, these 80km CWDM SFP modules are solid — stable link, correct wavelength, and no errors during our acceptance test. Delivery took a little longer than expected because our project schedule changed close to dispatch, but the packing and labeling were good. We would still purchase again for the next CWDM expansion.

33 Полезный голос Комментарии

х***у

Филиппины

Подтвержденная покупка

5 .0

2025-02-28

This 1490nm 80km CWDM SFP was purchased for a regional access network where spare fiber was limited. We used a CWDM wavelength plan to carry several 1G services over one single-mode fiber pair, and this module occupied the 1490nm channel without interfering with the adjacent channels. The DFB transmitter and PIN receiver combination performed as expected over the measured loss budget. We also ran compatibility and monitoring checks before field deployment. The host recognized the module properly, and the SFF-8472 diagnostics gave the operations team useful TX power, RX power, voltage, temperature, and laser-bias visibility. For NOC teams, that visibility matters because it lets you spot degraded connectors or fiber loss before users report an outage.

128 Полезный голос Комментарии

L *** у

Австралия

Подтвержденная покупка

5 .0

2025-01-15

Stable optical power and error-free operation on our long-haul campus link.

53 Полезный голос Комментарии