Our fiber route is about 72 km and includes patch panels and splice points. Can we use this 80km CWDM SFP module for the link?

Potentially, yes. The 80km rating is the maximum nominal transmission distance, but the total fiber loss must remain within the module’s optical budget after including fiber attenuation, connector loss, splice loss, and CWDM MUX/DEMUX insertion loss.

We already have a 1470nm CWDM module at the remote end. Can we pair it with this LS-CW451G-80C 1450nm module?

No. For a normal duplex CWDM connection, both ends should use matching 1450nm modules. A 1450nm module should not be directly paired with a 1470nm module.

Our modules are installed inside a controlled central office, but some racks run warm during peak traffic. Is the 0°C to +70°C rating based on ambient temperature or module case temperature?

The stated 0°C to +70°C specification is the operating case-temperature range. Actual module case temperature can be higher than room ambient temperature, depending on airflow, switch design, port density, and power consumption.

Our switch provides a standard 3.3V SFP power supply. Does this module need any additional power connection?

No. The LS-CW451G-80C module operates from a single +3.3V power supply through the SFP host interface and does not require an external power connection.

Breadcrumb: Главная; Продукты; Оптика Трансиверы | SFP-модули; Модули приемопередатчиков 1/2/4G; 1G CWDM/DWDM SFP; 203226

Нажмите, чтобы открыть расширенный вид

LINK-PP LS-CW451G-80C 1G SFP CWDM 1450 нм 80 км Дуплексный оптический трансивер LC DDM SMF

Name: LINK-PP LS-CW451G-80C 1G SFP CWDM 1450 нм 80 км Дуплексный оптический трансивер LC DDM SMF
Brand: LINK-PP
SKU: 203226
Price: 43 USD
Availability: InStock
Rating: 4.9 (27 reviews)

# 203226

Продукт: LINK-PP LS-CW451G-80C 1G SFP CWDM 1450 нм 80 км Дуплексный оптический трансивер LC DDM SMF
SKU: 203226
P / N: LS-CW451G-80C
Цена: $ 50
Сток: 178 в наличии
Продано: 922
URL-адрес продукта: https://www.l-p.com/products/492692.htm

При заказе на сумму более 1000 долларов получите скидку 15.00 долларов. Код: Linkpp15

При заказе на сумму более 3000 долларов получите скидку 50.00 долларов. Код: Linkpp50

При заказе на сумму более 5000 долларов получите скидку 100.00 долларов. Код: Linkpp100

Новым пользователям: купон на 10 долларов на заказы. Код: linkpp2610

: LINK-PP LS-CW451G-80C 1G SFP CWDM 1450 нм 80 км Дуплексный оптический трансивер LC DDM SMF

27 Отзывы Нужна помощь?

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.value }}
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Quantity

27 отзывов

4 вопросов

Запросить запас

922 Продано

$ 50

Бесплатная доставка на сумму более 600 долларов США. Если вам нужна более выгодная цена, пожалуйста, свяжитесь с нами напрямую.

Кол-во (шт.):

Цена за единицу :

$ 50

100

$ 47.5

1000

$ 46

3000

$ 44.5

6000

$ 43

Производство: LINK-PP

P / N: LS-CW451G-80C

Совместимость:: Cisco; LINK-PP; Arista; Brocade; Ciena; Dell; Extreme; Juniper; Netgear

Длина волны:: 1270nm; 1290nm; 1310nm; 1330nm; 1350nm; 1370nm; 1390nm; 1410nm; 1430nm; 1450nm; 1470nm; 1490nm; 1510nm; 1530nm; 1550nm; 1570nm; 1590nm; 1610nm

Отправка и доставка:

Вести переговоры

Бесплатная доставка

Не могу доставить

в США с помощью {{now_chooseship?now_chooseship.name:''}}

Срок доставки : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} дней. Подробнее

5-летнюю гарантию 30-Day Returns 30-дневный обмен

Наличие на складе:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}.

Количество:

( Минимальный заказ {{detail_data.prodInfo.minimum_ordered_quantity}} )

сданным

Итоговая цена:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Добавить в пожелание

Характеристики

Параметр
Видео
Соответствующие продукты
Скачать
Вопросы и ответы
Отзывы клиентов

LINK-PP Технические характеристики LS-CW451G-80C 1G SFP

LS-CW451G-80C comes as a 1450nm CWDM SFP module with support for data rates of up to 1.25Gbps. Built with a DFB laser and PIN photodiode, it delivers transmission over SMF distances of up to 80km and operates within a 0 to +70°C temperature range. Real-time digital diagnostic monitoring enables continuous monitoring of essential module parameters and operating status.

LINK-PP Номер детали	LS-CW451G-80C	Название поставщика	LINK-PP
Форм-фактор	SFP	Максимальная скорость передачи данных	1.25Gbps
Длина волны	1450nm	Максимальное расстояние кабеля	80km
соединитель	Дуплексный ЖК	Медиафайлы	SMF
Тип передатчика	DFB	Тип приемника	PIN-код
TX Power	От -1 до + 4 дБм	Мощность RX	От -26 до -1 дБм
Чувствительность приемника	-26dBm	приемник перегрузки	-1dBm
ЭМС (Электромагнитная связь)	Поддержанный	DDM	Поддержанный
Диапазон рабочих температур	0 до 70 ° C	протоколы	SFP MSA、SFF-8472

Видео

Соответствующие продукты

Картинки

МНЕ БЫ#

Описание

Цена

Сток

Добавить в корзину

Скачать

Чертеж устройства

PDF
LS-CWxx1G-80x.pdf

Вопросы и Ответы
Задать вопрос

Нет данных

Q: Our fiber route is about 72 km and includes patch panels and splice points. Can we use this 80km CWDM SFP module for the link? По Q***e on 2026-03-10

A: Potentially, yes. The 80km rating is the maximum nominal transmission distance, but the total fiber loss must remain within the module’s optical budget after including fiber attenuation, connector loss, splice loss, and CWDM MUX/DEMUX insertion loss. Администратор on 2026-03-11
Q: We already have a 1470nm CWDM module at the remote end. Can we pair it with this LS-CW451G-80C 1450nm module? Автор: Р***к on 2026-01-21

A: No. For a normal duplex CWDM connection, both ends should use matching 1450nm modules. A 1450nm module should not be directly paired with a 1470nm module. Администратор on 2026-01-22
Q: Our modules are installed inside a controlled central office, but some racks run warm during peak traffic. Is the 0°C to +70°C rating based on ambient temperature or module case temperature? Автор: П***г on 2025-06-29

A: The stated 0°C to +70°C specification is the operating case-temperature range. Actual module case temperature can be higher than room ambient temperature, depending on airflow, switch design, port density, and power consumption. Администратор on 2025-06-30
Q: Our switch provides a standard 3.3V SFP power supply. Does this module need any additional power connection? Автор: С***н on 2025-05-19

A: No. The LS-CW451G-80C module operates from a single +3.3V power supply through the SFP host interface and does not require an external power connection. Администратор on 2025-05-20

Ещё

Отзывы клиентов
Написать отзыв

{{stardata.star}}

{{comment.count}} с отзывами
5 Звезды

{{comment.star5}}%

4 Звезды

{{comment.star4}}%

3 Звезды

{{comment.star3}}%

2 Звезды

{{comment.star2}}%

1 Star

{{comment.star1}}%

Все отзывы ({{comment.star_num?comment.star_num:comment.count}})

Все отзывы

Только 5 звезд

Только 4 звезд

Только 3 звезд

Только 2 звезд

Только 1 звезда
Обзоры с картинками ( {{comment.pic_comment}} )
Просмотреть все отзывы

Нет данных

V *** у

Швеция

Подтвержденная покупка

5 .0

2026-05-25

Good fit for a long-distance enterprise network where we still have active 1GbE access switches. The 1G SFP format saved us from replacing working equipment while adding another CWDM wavelength to the existing SMF pair.

90 Полезный голос Комментарии

N *** г

ЮАР

Подтвержденная покупка

5 .0

2026-04-22

We needed 1450nm CWDM modules specifically, not a generic 1310nm long-reach SFP. This module matched our CWDM channel plan, delivered a stable 1.25G connection, and fit our duplex LC patching setup perfectly.

61 Полезный голос Комментарии

L *** п

Канада

Подтвержденная покупка

5 .0

2026-04-03

Good optical budget for our long campus backbone.

51 Полезный голос Комментарии

P *** s

Индия

Подтвержденная покупка

5 .0

2026-03-30

Hot-swapped into our aggregation rack without a single glitch or port flap. (•‿•)

66 Полезный голос Комментарии

L *** т

Новая Зеландия

Подтвержденная покупка

5 .0

2026-03-09

Installed as part of a multi-vendor switch refresh where legacy access equipment still relies on standard SFP ports. We provided the required host coding information before ordering, and the modules were delivered ready for our planned device profile. On a 57km single-mode fiber link, the 1.25Gbps port negotiated normally and stayed stable through traffic tests. The Duplex LC interface was convenient because the field plant already used LC patch panels, and DOM helped quickly identify one dirty connector during installation.

99 Полезный голос Комментарии

S *** х

Норвегия

Подтвержденная покупка

5 .0

2026-02-27

A practical option for a 1G backbone over single-mode fiber. Our techs like that it is a standard duplex LC SFP, so there is no special handling beyond checking polarity and cleaning the connectors.

85 Полезный голос Комментарии

J *** к

Великобритания

Подтвержденная покупка

5 .0

2026-01-22

Solid 1G CWDM SFP for an 80km single-mode fiber run.

50 Полезный голос Комментарии

C *** р

Финляндия

Подтвержденная покупка

4 .0

2026-01-08

The 80km CWDM 1G SFP itself tested well, linked quickly, and the 1450nm channel matched our fiber plan. One carton arrived with a slightly crushed outer corner, although the anti-static packaging and modules inside were fine.

23 Полезный голос Комментарии

Q *** ч

Российская Федерация

Подтвержденная покупка

5 .0

2026-01-04

The module works well for long-haul 1G Ethernet transport where a 1450nm CWDM channel is needed. Vendor coding was handled before shipment, which made the rollout much faster for our operations team.

103 Полезный голос Комментарии

W *** s

Нидерланды

Подтвержденная покупка

5 .0

2025-12-21

Ordered these 1G SFP modules for a CWDM MUX/DEMUX upgrade where the 1450nm channel was already assigned in the fiber plan. The modules came up quickly, and DDM monitoring lets our NOC keep an eye on transmit power, receive power, temperature, and supply voltage.

132 Полезный голос Комментарии

I *** к

Польша

Подтвержденная покупка

5 .0

2025-12-08

Our data-center team used this 1G 1450nm CWDM SFP module to carry management and storage-related traffic between facilities over single-mode fiber. It is not intended to turn a 1G port into 10G, but for legacy Gigabit interfaces it gives a clean, cost-conscious way to use a long CWDM span. The standard SFP MSA form factor seated properly, and the SFF-8472 DOM data integrated into our normal monitoring workflow.

159 Полезный голос Комментарии

N *** е

Австралия

Подтвержденная покупка

5 .0

2025-11-19

Duplex LC connection, 1450nm channel, zero drama.

74 Полезный голос Комментарии

Меня

Малайзия

Подтвержденная покупка

5 .0

2025-11-11

We deployed 18 units of the LS-CW451G-80C in a municipal campus network connecting branch buildings to a central data room. The longest fiber section was just under 73km after splice and patch-panel losses, so we selected the 80km CWDM 1G SFP to retain reasonable margin. Initial DDM readings showed TX around the expected range and receiver levels comfortably above the sensitivity threshold. After several weeks, interface counters remain clean with no observed packet loss or CRC growth.

134 Полезный голос Комментарии

T *** s

Италия

Подтвержденная покупка

5 .0

2025-10-29

These 1450nm CWDM SFP transceivers were purchased for a multi-site fiber ring. Each unit was recognized correctly, and the SFF-8472 digital diagnostics were useful during commissioning. No CRC errors so far.

128 Полезный голос Комментарии

D *** у

Румыния

Подтвержденная покупка

4 .0

2025-09-21

Performance is good on our 68km SMF route, and the DDM values look normal after installation. Shipping took a little longer than expected for a small replacement order, but the optical modules were properly labeled and worked on arrival.

37 Полезный голос Комментарии

X *** п

Республика Корея

Подтвержденная покупка

5 .0

2025-09-09

We used this LS-CW451G-80C 1450nm CWDM SFP to extend a 1G link between two campus buildings. The 80km rating gave us plenty of optical margin on our much shorter single-mode fiber route, and the duplex LC connector made replacement straightforward.

84 Полезный голос Комментарии

Германия

Подтвержденная покупка

5 .0

2025-08-14

Installed cleanly and linked immediately on our 1450nm CWDM fiber path.

59 Полезный голос Комментарии

Или

Таиланд

Подтвержденная покупка

5 .0

2025-08-04

Nice balance of price and performance for a commercial-grade 1G CWDM SFP. It is especially useful when upgrading fiber capacity is more practical than pulling another cable.

86 Полезный голос Комментарии

O *** у

Бразилия

Подтвержденная покупка

5 .0

2025-07-28

Perfect 1450nm CWDM grid channel pass-through on our passive 8-channel mux.

63 Полезный голос Комментарии

К *** п

Бельгия

Подтвержденная покупка

5 .0

2025-07-19

We evaluated a pair on a long enterprise fiber route that includes multiple fusion splices, distribution frames, and CWDM passive components. The 1450nm channel passed traffic continuously during a 72-hour soak test, while optical diagnostics remained consistent with the calculated loss budget. The -26dBm receiver sensitivity is useful for these longer links, although we still recommend validating actual attenuation and keeping appropriate engineering margin. This is a good commercial-temperature 80km CWDM SFP for indoor network cabinets and managed backbone sites.

144 Полезный голос Комментарии

R *** г

Сингапур

Подтвержденная покупка

5 .0

2025-06-18

We installed a batch in an indoor equipment room for separate CWDM channels over one fiber route. The optical power values stayed within expected limits, and the modules have been stable through normal HVAC temperature swings.

71 Полезный голос Комментарии

J *** у

Австрия

Подтвержденная покупка

5 .0

2025-05-14

This was purchased for a 1G base-station backhaul extension where available fiber was limited and the wavelength plan could not be changed. The module’s 1450nm CWDM wavelength allowed us to add capacity without deploying additional fiber pairs. We monitored DOM values during peak utilization and saw no abnormal drift in transmit or receive levels. The unit is commercial-grade rather than industrial temperature rated, so we installed it inside a conditioned enclosure as planned; for that environment, performance has been excellent.

132 Полезный голос Комментарии

K *** к

Франция

Подтвержденная покупка

5 .0

2025-05-09

DOM readings are stable and easy to verify from the switch CLI.

62 Полезный голос Комментарии

U *** т

Испания

Подтвержденная покупка

5 .0

2025-04-01

We tested the module on a remote telecom shelter link and got a stable connection with clean diagnostic values. The DFB transmitter and PIN receiver combination works well for this type of 80km CWDM deployment.

78 Полезный голос Комментарии

P *** к

Филиппины

Подтвержденная покупка

5 .0

2025-03-24

Great module for point-to-point Gigabit links where trenching new fiber wasn't an option. Adding this 1450nm wavelength channel into our existing CWDM filter allowed us to spin up a dedicated backup link across 68km. Solid optical link stability over 30 days of continuous traffic.

137 Полезный голос Комментарии

Вы

Мексика

Подтвержденная покупка

5 .0

2025-02-11

Reliable CWDM 1G SFP module for remote-site connectivity.

58 Полезный голос Комментарии

M *** ч

Индонезия

Подтвержденная покупка

5 .0

2025-01-08

Our operations team used these modules in a CWDM transport overlay for several 1GbE aggregation links. The key requirement was a 1450nm DFB CWDM transmitter compatible with our existing passive MUX/DEMUX channel map, plus readable SFF-8472 diagnostics. During acceptance testing, we checked temperature, voltage, laser bias, TX power, and RX power on both ends; the readings were consistent across the shipment. For commercial indoor racks operating within 0–70°C, this has been a dependable long-distance 1G SFP optical transceiver.

151 Полезный голос Комментарии