LS-DW2510-80I delivers point-to-point 10GBASE-DWDM connectivity up to 80km across single-mode fiber (SMF), utilizing a 100GHz ITU-compliant 1557.36nm (Channel 25) cooled EML laser alongside an APD photodiode detector. Also, built-in digital diagnostic monitoring (DDM) facilitates real-time performance tracking and operational fault detection.
LINK-PP Part Number
LS-DW2510-80I
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1557.36nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
-40 to +85°C
Protocols
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of LINK-PP LS-DW2510-80I 10G SFP+
LINK-PP LS-DW2510-80I is an industrial-grade SFP+ DWDM transceiver designed to deliver reliable 10Gbps data links over single-mode fiber up to 80km. Combining a precise 1557.36nm (C25) wavelength, standard duplex LC interface, and integrated real-time diagnostics, it provides an efficient optical solution for demanding network infrastructures.
LINK-PP LS-DW2510-80I 10G SFP+ Optical Module
The transceiver features a hot-pluggable SFP+ footprint that allows network operators to install or replace units without interrupting ongoing system operations. Full compliance with the SFP+ Multi-Source Agreement (MSA) guarantees broad mechanical and electrical compatibility across various standardized networking platforms.
LS-DW2510-80I: 10 Gbps Connectivity for Industrial Edge Deployments
Operating at a 10Gbps line rate, this DWDM SFP+ provides robust bandwidth to handle aggregation and high-throughput data traffic. Its rugged industrial design ensures uninterrupted transmission in harsh outdoor cabinets, roadside units, and factory edge sites across extreme operating temperatures.
LS-DW2510-80I Module with DWDM Technology for Fiber Efficiency
Dense Wavelength Division Multiplexing (DWDM) technology enables multiple data streams to travel simultaneously across a single optical fiber pair using 100GHz ITU channel spacing. This multichannel capability multiplies total network carrying capacity without the expense of laying new physical fiber cables.
LS-DW2510-80I Module with 1557.36nm Wavelength
A fixed 1557.36nm central wavelength (Channel 25) utilizes a cooled C-band EML laser to deliver exceptionally stable spectral accuracy. This tight spectral control prevents optical crosstalk with neighboring channels on the 100GHz grid, maintaining clean signal integrity throughout transmission.
LS-DW2510-80I Module Supporting 80km Transmission
Long-reach capability up to 80km is driven by an optical link budget engineered with an avalanche photodiode (APD) detector. This extended transmission distance easily links separated metro rings, regional points of presence, and remote telecom sites without mid-span amplification.
LS-DW2510-80I Module with Duplex LC Interface
The industry-standard duplex LC optical connector provides a secure snap-in connection for common single-mode fiber patch cords. Its compact dual-fiber layout saves panel space while ensuring low insertion loss and consistent physical alignment in high-density patch fields.
LS-DW2510-80I Module with DDM for Real-Time Monitoring
Digital Diagnostic Monitoring (DDM) operates via the two-wire interface to provide real-time visibility into internal module parameters. Fully compatible with SFF-8472 standards, it allows administrators to track laser bias current, operating temperature, supply voltage, and optical power for proactive fault prevention.
LINK-PP LS-DW2510-80I 10G SFP+ Certification
The LS-DW2510-80I SFP+ DWDM module strictly meets global manufacturing and environmental standards, holding full certifications including ISO 9001, CE, RoHS, and FCC to guarantee safe and dependable operation.
Rigorous optical profiling and simulated field environment checks are conducted on every 10G DWDM transceiver to guarantee solid signal integrity before it leaves the factory.
LS-DW2510-80I Quality Certifications
Comprehensive certifications verify that each module satisfies strict industry safety mandates and international operational standards.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
LS-DW2510-80I Certified for Reliable Host-Device Compatibility
Targeted interoperability validation ensures seamless plug-and-play communication across switches, routers, and transport gear from major networking vendors.
Every LS-DW2510-80I 10G SFP+ DWDM module undergoes a strict series of hardware validations to verify optimal signal integrity and stable data transmission across long-distance fiber links. For detailed verification procedures, discover more at the LINK-PP Test Support Center.
Optical Spectrum Test
Measure central wavelength precision to prevent channel crosstalk across fibers.
Eye Pattern Test
Evaluate optical waveform clarity to ensure compliant transmitter signal margins.
Bit Error Rate Test
Analyze long-duration data streams to verify clean, error-free link transmission.
Temperature Test
Monitor real-time module performance across extreme industrial operating temperature ranges.
Product Shipping for LINK-PP LS-DW2510-80I 10G SFP+
Each LS-DW2510-80I DWDM SFP+ module is carefully packaged and processed under strict warehouse protocols to prevent physical damage during long-distance transit. We partner with reliable international carriers to ensure safe, traceable, and prompt delivery directly to your facility.
Anti-Static Protective Packaging
Prevent electrostatic discharge damage to protect sensitive internal optical components.
Shock-Resistant Transport Protection
Shield delicate transceiver hardware against accidental impacts during worldwide transit.
Fast Order Processing and Dispatch
Prepare confirmed warehouse inventory quickly to accelerate immediate parcel dispatch.
Global Logistics and International Delivery
Coordinate trusted shipping carriers efficiently to achieve dependable worldwide delivery.
Ensure optical interfaces are clean, align the LS-DW2510-80I industrial-grade DWDM SFP+ module with the host port, and push gently until latched securely before inserting LC connectors. This reliable plug-and-play process allows field engineers to quickly establish stable long-distance 10G DWDM links across harsh industrial edge cabinets.
LS-DW2510-80I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal LS-DW2510-80I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
United States · English · USD
By