Le Categorie
Moduli SFP
Servizi
Assistenza
Chi siamo
Risorse
Fai i tuoi affari con una varietà di opzioni di pagamento affidabili.
Utilizza il numero dell'ordine o il numero di tracciamento per controllare lo stato della spedizione
Ottieni rapidamente il tuo preventivo e ti offriamo un servizio più professionale.
Aiuta a gestire meglio il budget e le spese.
Supporto gratuito per i campioni, ottieni i risultati dei tuoi test in modo efficiente.
Supporto e servizio di squadra professionale, per risolvere i tuoi problemi in tempo.
Chiedici qualsiasi cosa ti interessi, ti aiuteremo 24 ore su 24, 7 giorni su 7.
Ottieni il tuo preventivo velocemente e offri un servizio più professionale.
Incontraci e conosci la nostra missione, convinzione, servizio e altro ancora.
Trova le nostre sedi e mettiti in contatto con noi da vicino.
Gestione della qualità, test, compatibilità e conformità globale.
Visita del laboratorio, banco di prova ottico, strumento di compatibilità e richieste di test.
Scopri le ultime novità e gli eventi in giro l-p.com
Approfondimenti su guide tecniche, standard di settore e approfondimenti sulla compatibilità SFP.
Benchmark dettagliati dei prodotti e confronti affiancati per aiutarti a scegliere il modulo giusto.
Esplora soluzioni di connettività concrete per data center, aziende e reti di telecomunicazioni.
Suggerimenti essenziali sulla scelta delle velocità di trasmissione dati, delle distanze di trasmissione e dei tipi di connettori.
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
Migliori LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module cuts infrastructure costs by enabling bidirectional 2.5Gbps data transmission over single-mode fiber for up to 40km. It achieves this through dependable optical performance, employing a 1310nm transmit and 1550nm receive wavelength to deliver stable, high-efficiency connectivity.
| LINK-PP Numero d'identificazione | LS-BL31552G-40C | Nome fornitore | LINK-PP |
| Fattore di forma | SFP | Max Data Rate | 2.5Gbps |
| Lunghezza d'onda | 1310 nm-TX/1550 nm-RX | Distanza massima del cavo | 40km |
| Connettore | LC semplice | Media | SMF |
| Tipo di trasmettitore | DFB | Tipo di ricevitore |
PIN |
| Potenza TX | Da -2 a + 4dBm | Potenza RX | Da -23 a -1dBm |
| Sensibilità del ricevitore | <-20dBm | Ricevitore sovraccarico | -1dBm |
| Intervallo operativo di temperatura | 0 a 70 ° C | protocolli |
Fast Ethernet, Gigabit Fibre Channel, conforme a MSA |
Designed for cost-efficient, long-distance networking, the LINK-PP LS-BL31552G-40C module supports 2.5Gbps full-duplex transmission over a single fiber up to 40 km. It features a hot-pluggable SFP design for quick installation and an integrated DOM for ongoing monitoring, helping maintain stable, manageable performance.
A high-performance DFB laser and PIN/TIA receiver are included with this LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module. The wavelength pair is properly matched for reliable bidirectional transmission with robust EMI resistance and low bit error rates over extended distances.
When reliable long-distance performance is needed, the LINK-PP LS-BL31552G-40C offers a practical and stable solution for 2.5Gbps connectivity across campus environments, telecom infrastructure, and enterprise networks.
By accurately pairing 1310nm transmit and 1550nm receive wavelengths, this LINK-PP LS-BL31552G-40C module ensures stable, low-interference transmission, supporting long-distance communication with excellent signal clarity and efficiency over single-mode fiber.
Built for extended reach, the LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module delivers up to 40km transmission over single-mode fiber with stable signal integrity, ideal for metro and backbone networks requiring reliable long-distance links.
The simplex LC interface allows both transmit and receive signals to operate through a single connector. This reduces fiber usage, simplifies cabling layouts, and lowers deployment and maintenance costs.
Equipped with Digital Optical Monitoring (DOM), the LINK-PP LS-BL31552G-40C module enables real-time monitoring of parameters such as temperature, voltage, transmit power, and receive power to promote proactive maintenance and accelerate fault diagnosis.
| Immagini | ID # | Descrizione | Prezzo | Di Serie | Aggiungi al Carrello |
Q: What SFF diagnostic standards are used for DDM readouts on this BiDi module, and can I read transmit power levels via SNMP? Di R***r on 2026-05-04
A: The module integrates Digital Diagnostics Monitoring (DDM/DOM) in full compliance with SFF-8472, enabling real-time monitoring of TX output power, RX input power, laser bias current, module supply voltage, and internal temperature via standard switch SNMP MIBs. A cura dell'amministratore on 2026-05-05
Q: Does the 40km distance rating require a minimum fiber optical attenuation or optical attenuator for short-distance testing on a bench? Di A***n on 2026-02-26
A: Yes, because the optical transmitter is calibrated for long-reach 40km spans, connecting this module directly on a short patch cable (e.g., under 5km) without an optical attenuator (typically 5dB to 10dB) may saturate or damage the sensitive optical receiver. A cura dell'amministratore on 2026-02-27
Q: How do I select the correct counter-part optical module to pair with this 1310nm-TX / 1550nm-RX BiDi transceiver on a single fiber strand? Di C***s on 2025-01-17
A: To establish a functional link over a single fiber strand, the opposite end of the fiber link must use a complementary BiDi module that transmits at 1550nm and receives at 1310nm (1550nm-TX / 1310nm-RX 2.5G BiDi SFP 40km). A cura dell'amministratore on 2025-01-17
Q: Will this simplex LC BiDi module work with APC (Angled Physical Contact) polished fiber jumpers or only UPC/PC polished jumpers? By H***k on 2024-12-14
A: The optical interface uses a standard blue Simplex LC/UPC connector. For optimal optical return loss and minimal insertion loss, it should be connected to LC/UPC polished single-mode fiber patch cables rather than green LC/APC connectors. A cura dell'amministratore on 2024-12-14
Q: Can this 2.5G SFP BiDi transceiver auto-negotiate down to standard 1Gbps or 100Mbps speeds on legacy switch ports? B Sì on 2024-03-19
A: No, this module operates at a fixed data rate of 2.5Gbps (SONET OC-48 / 2.5G Ethernet). Both the switch port and the optic on the far end must support native 2.5G rate for the link to negotiate and establish connection. A cura dell'amministratore on 2024-03-20
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} Presto DisponibileStati Uniti
Vettore
Costo Tempi di consegna Monitoraggio
Azienda
Costo Tempo
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} Essere negoziato {{shipitem.datemin}}-{{shipitem.datemax}} giorni Disponibile