Bebas biaya kirim: IDR 1,792,841+ (transceiver & sangkar), IDR 10,865,700+ (produk lainnya). Untuk jumlah yang lebih besar atau harga khusus, hubungi kami langsung.
Butuh Bantuan?
Ngobrol langsung dengan kami
Live chat
Ingin menelepon?

Telepon: + 86-752-3386717

Indonesia · Indonesian · IDR
  • Jalankan bisnis Anda dengan berbagai pilihan pembayaran yang tepercaya.

  • Gunakan nomor pesanan atau nomor pelacakan untuk memeriksa status pengiriman.

  • Dapatkan penawaran harga Anda dengan cepat dan tawarkan layanan yang lebih profesional.

  • Bantu kelola anggaran & pengeluaran Anda dengan lebih baik.

  • Dukungan sampel gratis, capai hasil pengujian Anda secara efisien.

  • Dukungan dan layanan tim profesional, untuk menyelesaikan masalah Anda tepat waktu.

  • Tanyakan apa pun yang Anda khawatirkan, kami akan membantu Anda 24/7.

  • Dapatkan penawaran Anda dengan cepat dan tawarkan layanan yang lebih profesional.

  • Temui kami dan ketahui misi, keyakinan, layanan, dan banyak lagi.

  • Temukan lokasi kami dan terhubunglah dengan kami secara dekat.

  • Manajemen mutu, pengujian, kompatibilitas, dan kepatuhan global.

  • Temukan berita dan acara terbaru di sekitar l-p.com

  • Telusuri secara mendalam panduan teknis, standar industri, dan wawasan kompatibilitas SFP.

  • Tolok ukur produk terperinci dan perbandingan berdampingan untuk membantu Anda memilih modul yang tepat.

  • Jelajahi solusi konektivitas dunia nyata untuk pusat data, perusahaan, dan jaringan telekomunikasi.

  • Tips penting dalam memilih kecepatan data, jarak transmisi, dan jenis konektor.

Pilih Mata Uang
USD - Dolar AS
EUR - Euro
GBP - Pound Inggris
CAD - Dolar Kanada
AUD - Dolar Australia
JPY - Yen Jepang
SEK - Krona Swedia
NOK - Krone Norwegia
IDR - Rupiah Indonesia
BRL - Real Brasil
THB - Baht Thailand
L9-TD3101-02PPI 155m sdh sonet 1310nm 2km duplex st mmf 1x9 transceiver (industrial)
Klik untuk membuka tampilan yang diperluas

LINK-PP L9-TD3101-02PPI 155M SDH SONET 1310nm 2km Duplex ST MMF 1x9 Transceiver (Industri)

Ringkasan Produk

Produk
LINK-PP L9-TD3101-02PPI 155M SDH SONET 1310nm 2km Duplex ST MMF 1x9 Transceiver (Industri)
SKU
201052
P / N
L9-TD3101-02PPI
Harga
IDR 199,205
saham
210 dalam Stok
Terjual
1.8K
Patokan harga IDR 199205
Pengguna baru: IDR 181,095 Kupon untuk Pesanan Pertama Anda
Kode linkpp2610
Untuk Pemesanan Lebih dari IDR 18,109,500 Dapatkan IDR 271,643 Off
Kode Linkpp15
Untuk Pemesanan Lebih dari IDR 54,328,500 Dapatkan IDR 905,475 Off
Kode Linkpp50
Untuk Pemesanan Lebih dari IDR 90,547,500 Dapatkan IDR 1,810,950 Off
Kode Linkpp100
Pembuatan: LINK-PPP / N: L9-TD3101-02PPISKU: 201052

LINK-PP Garis Keturunan Asli

Kompatibel:
LINK-PP
Harga volume Tingkat pemesanan online · jumlah lebih besar atau harga khusus berdasarkan permintaan
IDR 199205
1–99 buah
IDR 189244
100–999 buah
IDR 183268
1,000–2,999 buah
IDR 177292
3,000–5,999 buah
IDR 171316
6,000 buah

Butuh jumlah lebih dari yang tertera di sini, atau ingin menegosiasikan harga?

Stock:
210 dalam Stok
Pengiriman:
IDR 605,038
untuk Indonesia melalui IP FedEx
Perkiraan waktu pengiriman: 3 - 6 hari.
5-Tahun Garansi Pengembalian 15-Hari Penukaran 15 Hari
Jaminan
  • Memberikan garansi 5 tahun yang terdepan di industri.
  • Bacalah tabel berikut ini: details garansi semua produk.
Pengembalian & Penukaran
  • Pengembalian dana akan diterima sekitar 5 hari kerja setelah barang yang dikembalikan diterima.
  • Barang yang tersedia untuk penggantian dapat dikirim dalam waktu 1 hari kerja.
  • Baca kebijakan pengembalian selengkapnya untuk details.
Gratis ongkos kirim di atas IDR 1,792,841.
Atau kirim menggunakan akun UPS / FedEx / DHL Anda sendiri saat pembayaran (IDR 0 pengiriman).
Jumlah:
Total harga:
IDR 199205

LINK-PP L9-TD3101-02PPI 155Mbps 1×9 Transceiver Optik (MMF, 1310nm, 2km, dupleks ST, Industri)

LINK-PP Part Number L9-TD3101-02PPI Nama pedagang LINK-PP
Form Factor 1x9 Max Data Rate 155Mbps
Panjang gelombang 1310nm Jarak Kabel Maks 2km
konektor Dupleks ST Komponen Optik FP
fiber Jenis MMF Pasokan Tegangan

3.3V

Sensitivitas Penerima -32dBm Operasi Kisaran Suhu -40 ke 85 ° C

Tabel Perbandingan Model

LINK-PP

Produk yang Cocok

Film ID # Deskripsi Harga saham Yuk, Beli !

pertanyaan

Belum ada pertanyaan

Jadilah orang pertama yang bertanya tentang spesifikasi, kompatibilitas, atau waktu tunggu.

Ajukan Pertanyaan
  • A:
    It is a board-level repair. The 1x9 body is soldered to the host PCB, not seated in a pluggable cage, so replacing one means desoldering nine pins and reflowing a new unit rather than pulling a module from a port. For equipment that must be serviced without a soldering iron, use an SFP form factor instead. The upside of the soldered package is a fixed, vibration-resistant joint and no EEPROM coding to check on the host; we keep spares for legacy SDH cards that are never hot-swapped. by LINK-PP Dukungan teknis
  • A:
    Usually not at this reach. The specification gives a -32dBm receiver sensitivity on a 1310nm FP and PIN pair sized for 2km of multi-mode fibre, so a 300m span sits well inside the budget rather than near an overload point. This part launches at a modest level, so we add no pads on short in-building runs. If you do see errors, measure the receive level first and inspect the two ST ferrules before condemning the optic. A dirty bayonet end face costs more dB than the extra length will. by LINK-PP Dukungan teknis
  • A:
    Not on this page. Supply Voltage is listed as 3.3V with no optional 5V entry, and the details describe a single 3.3V supply with MSA standard pinouts. If your host only provides 5V, add a small 3.3V regulator rather than feeding the rail directly, because the FP laser and PIN receiver are specified at the lower voltage. Check the pinout against your existing footprint before ordering; the 1x9 outline is common across the family, but the supply pin assignment should still be confirmed on the datasheet. by LINK-PP Dukungan teknis
  • A:
    You need a different part or a short ST-to-SC patch cord. This transceiver has a duplex ST interface whose bayonet ferrules twist and lock, while SC uses a push-pull shell; the two do not mate directly. The optics are otherwise identical, so a hybrid patch cord with ST on the equipment end and SC on the plant end works without changing the 1310nm budget or the 2km reach. Keep one adapter per direction and clean both end faces, since the extra connector adds roughly 0.3dB of loss. by LINK-PP Dukungan teknis

Testimoni Pelanggan

  • 4.9

    38 Ulasan

  • 5 bintang
    95%
    4 bintang
    5%
    3 bintang
    0%
    2 bintang
    0%
    1 bintang
    0%
  • Semua Ulasan (38)
Tidak ada data
T *** e
Finlandia
Pembelian Terverifikasi
5.0
2026-11-07
Our incoming card has three ticks for this part: 1310nm FP optical components, 2km over multi-mode, and a lone 3.3V rail. Twenty units from the last lot matched the bill of materials on all three.
Iklan
Ukraina
Pembelian Terverifikasi
5.0
2026-10-10
Here the transmitter sits under 'Optical Components', not its own row.
L *** y
Italia
Pembelian Terverifikasi
5.0
2026-09-12
Form Factor stays 1x9 in every column, so the footprint did not change when we swapped a commercial unit for the industrial one. Same drill layer, same solder stencil =)
L *** k
India
Pembelian Terverifikasi
4.0
2026-08-14
Four stars because the reel arrived with the ST bayonet caps loose in the bag, so we rebagged twelve units before kitting. Every transceiver soldered flat and trained at 155M on the first board; the optics were fine.
T *** g
Republik Ceko
Pembelian Terverifikasi
5.0
2026-07-17
Reach and temperature vary down the table; 155Mbps never does.
Pembelian Terverifikasi
.0
Menampilkan komentar

By 

Belum ada ulasan

Jadilah orang pertama yang berbagi pengalaman Anda dengan produk ini.

Tulis Ulasan
|
Terjual