Bebas biaya kirim: IDR 1,789,754+ (transceiver & sangkar), IDR 10,846,992+ (produk lainnya). Untuk jumlah yang lebih besar atau harga khusus, hubungi kami langsung.
Butuh Bantuan?
Ngobrol langsung dengan kami
Live chat
Ingin menelepon?

Telepon: + 86-752-3386717

Indonesia · Indonesian · IDR
Referensi silang

Referensi Silang Sangkar

Alternatif nomor komponen (P/N) sangkar/konektor OEM dalam kategori sangkar. Hanya merek dengan suku cadang yang cocok yang tercantum.

Lihat semua kandang Kategori sangkar dan konektor serat optik lengkap.

Alternatif untuk nomor komponen OEM — bukan klaim otorisasi dari OEM.

Referensi silang

Referensi Silang Magjack

Alternatif nomor komponen (P/N) Magjack RJ45 terintegrasi dalam kategori ini — konfirmasikan sebelum memberikan penawaran.

Telusuri semua Magjack Kategori konektor magnetik RJ45 terintegrasi.

Alternatif untuk nomor komponen OEM — bukan klaim otorisasi dari OEM.

Referensi silang

Referensi Silang Transformator LAN

Alternatif P/N magnetik LAN diskrit dalam kategori ini. Bourns / lainnya memerlukan lebih banyak bukti sebelum dicantumkan.

Telusuri semua komponen magnetik LAN Kategori transformator & filter LAN.

Alternatif untuk nomor komponen OEM — bukan klaim otorisasi dari OEM.

  • Jalankan bisnis Anda dengan berbagai pilihan pembayaran yang tepercaya.

  • Gunakan nomor pesanan atau nomor pelacakan untuk memeriksa status pengiriman.

  • Dapatkan penawaran harga Anda dengan cepat dan tawarkan layanan yang lebih profesional.

  • Bantu kelola anggaran & pengeluaran Anda dengan lebih baik.

  • Dukungan sampel gratis, capai hasil pengujian Anda secara efisien.

  • Dukungan dan layanan tim profesional, untuk menyelesaikan masalah Anda tepat waktu.

  • Tanyakan apa pun yang Anda khawatirkan, kami akan membantu Anda 24/7.

  • Dapatkan penawaran Anda dengan cepat dan tawarkan layanan yang lebih profesional.

  • Temui kami dan ketahui misi, keyakinan, layanan, dan banyak lagi.

  • Temukan lokasi kami dan terhubunglah dengan kami secara dekat.

  • Manajemen mutu, pengujian, kompatibilitas, dan kepatuhan global.

  • Temukan berita dan acara terbaru di sekitar l-p.com

  • Telusuri secara mendalam panduan teknis, standar industri, dan wawasan kompatibilitas SFP.

  • Tolok ukur produk terperinci dan perbandingan berdampingan untuk membantu Anda memilih modul yang tepat.

  • Jelajahi solusi konektivitas dunia nyata untuk pusat data, perusahaan, dan jaringan telekomunikasi.

  • Tips penting dalam memilih kecepatan data, jarak transmisi, dan jenis konektor.

Pilih Mata Uang
USD - Dolar AS
EUR - Euro
GBP - Pound Inggris
CAD - Dolar Kanada
AUD - Dolar Australia
JPY - Yen Jepang
SEK - Krona Swedia
NOK - Krone Norwegia
IDR - Rupiah Indonesia
BRL - Real Brasil
THB - Baht Thailand
LP21AC02201 sfp 2x1 cage connector press-fit with inner light pipe
Klik untuk membuka tampilan yang diperluas

Konektor Kandang SFP 21x02201 LP2AC1 Press-Fit Dengan Pipa Lampu Dalam

Ringkasan Produk

Produk
Konektor Kandang SFP 21x02201 LP2AC1 Press-Fit Dengan Pipa Lampu Dalam
SKU
170759
P / N
LP21AC02201
Harga
IDR 63,997
saham
5100 dalam Stok
Terjual
902
Patokan harga IDR 63997
Pengguna baru: IDR 180,783 Kupon untuk Pesanan Pertama Anda
Kode linkpp2610
Untuk Pemesanan Lebih dari IDR 18,078,320 Dapatkan IDR 271,175 Off
Kode Linkpp15
Untuk Pemesanan Lebih dari IDR 54,234,960 Dapatkan IDR 903,916 Off
Kode Linkpp50
Untuk Pemesanan Lebih dari IDR 90,391,600 Dapatkan IDR 1,807,832 Off
Kode Linkpp100
P / N: LP21AC02201SKU: 170759

LINK-PP Garis Keturunan AsliDatasheetsemua download

Kompatibel:
LINK-PP
P/N yang kompatibel:
LP21AC02201
Harga volume Tingkat pemesanan online · jumlah lebih besar atau harga khusus berdasarkan permintaan
IDR 63997
1–99 buah
IDR 53331
100–999 buah
IDR 49227
1,000–4,999 buah
IDR 43424
5,000–9,999 buah
IDR 41146
10,000 buah

Butuh jumlah lebih dari yang tertera di sini, atau ingin menegosiasikan harga?

Stock:
5100 dalam Stok
Pengiriman:
IDR 603,997
untuk Indonesia melalui IP FedEx
Perkiraan waktu pengiriman: 3 - 6 hari.
5-Tahun Garansi Pengembalian 15-Hari Penukaran 15 Hari
Jaminan
  • Memberikan garansi 5 tahun yang terdepan di industri.
  • Bacalah tabel berikut ini: details garansi semua produk.
Pengembalian & Penukaran
  • Pengembalian dana akan diterima sekitar 5 hari kerja setelah barang yang dikembalikan diterima.
  • Barang yang tersedia untuk penggantian dapat dikirim dalam waktu 1 hari kerja.
  • Baca kebijakan pengembalian selengkapnya untuk details.
Gratis ongkos kirim di atas IDR 1,789,754.
Atau kirim menggunakan akun UPS / FedEx / DHL Anda sendiri saat pembayaran (IDR 0 pengiriman).
Jumlah:
Total harga:
IDR 63997

LINK-PP Konektor Kandang SFP Port 21x02201 LP2AC1 Press-Fit Dengan Pipa Cahaya Dalam

LINK-PP Part Number LP21AC02201 Status Bagian Aktif
Tipe Produk Kandang Form Factor SFP
Kandang PADUAN TEMBAGA, DIPLASI DENGAN NILAI KEMASAN KEMASAN NAMPAN
Konfigurasi Matriks Port Pelabuhan 2x1 Jumlah Ports 2
Operasi Kisaran Suhu -40 - 85 ° C Gaya Pemasangan Melalui Lubang, Sudut Kanan
Termasuk Lightpipe Pipa Cahaya Dalam Penghentian Tekan-Fit
Tinggi (Inci/mm) 0.992/25.20 Panjang (inci/mm) 2.490/63.25
Lebar (Inci/mm) 0.551/14.00 Jenis Fitur Penahanan EMI
Mata Air EMI

Tabel Perbandingan Model

LINK-PP

Produk yang Cocok

Film ID # Deskripsi Harga saham Yuk, Beli !

Unduh

Gambar Produk LP21AC02201.pdf

pertanyaan

Belum ada pertanyaan

Jadilah orang pertama yang bertanya tentang spesifikasi, kompatibilitas, atau waktu tunggu.

Ajukan Pertanyaan
  • A:
    The specified range is minus 40 to 85 C, and after a cold soak on our board the press-fit joints still read continuous with neither port binding on insertion. Pin to shell resistance held under 25 milliohms after three insertions into a test board, and we saw no flaking at the legs or discoloration along the folded seams. Keep the cage to chassis path short and check it again after thermal cycling if the enclosure sees repeated freeze and thaw. by LINK-PP Dukungan teknis
  • A:
    The cage is 25.20 mm high and 14.00 mm wide, and our 1U bezel was cut at 14.6 mm, leaving 0.3 mm per side. Check both dimensions against your panel drawing before tooling, and also confirm a transceiver in the upper port clears the latch of the lower one. If your opening is wider than about 15 mm the shield fingers have nothing to spring against, so plan a gasket or finger stock. Flatness after the press held within 0.07 mm on our batch. by LINK-PP Dukungan teknis
  • A:
    It clips into a slot between the two ports, so both indicators are carried out through the centre of the stack rather than along the outside edge. Put the two LEDs on the host board directly under that slot and keep a clear optical path; a 0.5 mm bezel window is usually enough. On two of our twenty trays the pipe arrived loose and had to be clipped in by hand, so add a quick seating check to incoming inspection. Once seated, both ports line up without adjustment. by LINK-PP Dukungan teknis
  • A:
    Gauge the finished holes before the press rather than inspecting the cage afterwards. On our prototype board one hole came out 0.08 mm undersize and bowed the lower guide rail enough to stop a transceiver seating; reaming it to the drawing value fixed both ports for a 50 cycle test. Follow the specified finished diameter and keep the plating uniform through the barrel. Check every leg is straight before insertion, because a bent one opens the hole on the way in and cannot be recovered. by LINK-PP Dukungan teknis

Testimoni Pelanggan

  • 5

    36 Ulasan

  • 5 bintang
    97%
    4 bintang
    3%
    3 bintang
    0%
    2 bintang
    0%
    1 bintang
    0%
  • Semua Ulasan (36)
Tidak ada data
E *** k
Malaysia
Pembelian Terverifikasi
4.0
2025-12-30
Four stars because the inner light pipe sat loose in two of the twenty trays and had to be clipped in by hand. Both seated properly and line up with the board LEDs. A packing detail, not a fault in the cage.
Y *** t
Italia
Pembelian Terverifikasi
5.0
2025-10-20
The 25.20 mm height is what decides whether a 2x1 stack fits above the host board, and it is the first line on our incoming sheet. We measured ten cages and all sat within 0.09 mm, then checked that a transceiver in the upper port does not foul a latch in the lower one. Next we verified every press-fit leg was straight before the press, because a bent leg opens the plated hole on the way in. Then the inner light pipe was clipped into its slot between the two ports and aligned to the two board LEDs. Last came a continuity check on the cage to chassis path. Five lines, about four minutes a tray.
Menjadi
Ukraina
Pembelian Terverifikasi
5.0
2025-09-14
Press-Fit legs, so no solder on this one.
H *** m
India
Pembelian Terverifikasi
5.0
2025-07-07
One of the lower ports would not accept a transceiver past the first few millimetres on the prototype board, and the cage took the blame until we put a straightedge on it. A press-fit leg near that port had been driven into a hole finished 0.08 mm undersize, which bowed the lower guide rail inward just enough to catch the module rail. We reamed the hole to the specified size, replaced the cage, and both ports inserted cleanly for a 50 cycle test. Press-Fit is unforgiving about hole finish, so gauge the plated holes before the press rather than checking the cage afterwards.
C *** n
Spanyol
Pembelian Terverifikasi
5.0
2025-04-02
Minus 40 to 85 C covers the unheated cabinet this goes into. After a cold soak the press-fit joints still read continuous and neither port bound on insertion. The stacked frame stayed square :D
Pembelian Terverifikasi
.0
Menampilkan komentar

By 

Belum ada ulasan

Jadilah orang pertama yang berbagi pengalaman Anda dengan produk ini.

Tulis Ulasan
|
Terjual