Όλες οι κατηγορίες
Ενότητες SFP
Υπηρεσίες
Υποστήριξη
Σχετικά με εμάς
Υποστηρικτικό υλικό
Προσέξτε την επιχείρησή σας με μια ποικιλία από αξιόπιστες επιλογές πληρωμής.
Χρησιμοποιήστε τον αριθμό παραγγελίας ή τον αριθμό παρακολούθησης για να ελέγξετε την κατάσταση αποστολής.
Λάβετε γρήγορα την προσφορά σας και προσφέρετε πιο επαγγελματική εξυπηρέτηση.
Βοηθήστε να διαχειριστείτε καλύτερα τον προϋπολογισμό και τις δαπάνες σας.
Δωρεάν υποστήριξη δειγμάτων, επιτύχετε τα αποτελέσματα των δοκιμών σας αποτελεσματικά.
Επαγγελματική υποστήριξη και εξυπηρέτηση ομάδας, για την έγκαιρη επίλυση των προβλημάτων σας.
Ρωτήστε μας για οτιδήποτε σας απασχολεί, θα σας βοηθήσουμε 24/7.
Λάβετε την προσφορά σας γρήγορα και σας προσφέρουμε πιο επαγγελματική εξυπηρέτηση.
Γνωρίστε μας και γνωρίστε την αποστολή, τις πεποιθήσεις μας, την υπηρεσία και πολλά άλλα.
Βρείτε τις τοποθεσίες μας και συνδεθείτε στενά μαζί μας.
Διαχείριση ποιότητας, δοκιμές, συμβατότητα και παγκόσμια συμμόρφωση.
Ξενάγηση στο εργαστήριο, πλατφόρμα οπτικών δοκιμών, εργαλείο συμβατότητας και αιτήματα δοκιμών.
Μάθετε τα πιο πρόσφατα νέα και τα γεγονότα γύρω l-p.com
Εμβάθυνση σε τεχνικούς οδηγούς, πρότυπα του κλάδου και πληροφορίες για τη συμβατότητα με SFP.
Λεπτομερή benchmarks προϊόντων και συγκρίσεις μεταξύ τους που θα σας βοηθήσουν να επιλέξετε τη σωστή ενότητα.
Εξερευνήστε λύσεις συνδεσιμότητας σε πραγματικό κόσμο για κέντρα δεδομένων, επιχειρήσεις και τηλεπικοινωνιακά δίκτυα.
Βασικές συμβουλές για την επιλογή ρυθμών δεδομένων, αποστάσεων μετάδοσης και τύπων συνδέσμων.
{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}}
The LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module cuts infrastructure costs by enabling bidirectional 2.5Gbps data transmission over single-mode fiber for up to 40km. It achieves this through dependable optical performance, employing a 1310nm transmit and 1550nm receive wavelength to deliver stable, high-efficiency connectivity.
| LINK-PP Αριθμός Μέρος | LS-BL31552G-40C | Ονομα πωλητή | LINK-PP |
| Form Factor | SFP | Μέγιστο ρυθμό δεδομένων | 2.5Gbps |
| Μήκος κύματος | 1310nm-TX/1550nm-RX | Μέγιστη απόσταση καλωδίου | 40km |
| Connector | Simplex LC | Εικόνες / Βίντεο | SMF |
| Τύπος πομπού | DFB | Τύπος δέκτη |
PIN |
| TX Power | -2 έως +4dBm | RX Power | -23 έως -1dBm |
| Ευαισθησία δέκτη | <-20dBm | δέκτης υπερφόρτωσης | -1dBm |
| Εύρος θερμοκρασίας λειτουργίας | 0 σε 70 ° C | Πρωτόκολλα |
Fast Ethernet, Gigabit Fiber Channel, συμβατό με MSA |
Designed for cost-efficient, long-distance networking, the LINK-PP LS-BL31552G-40C module supports 2.5Gbps full-duplex transmission over a single fiber up to 40 km. It features a hot-pluggable SFP design for quick installation and an integrated DOM for ongoing monitoring, helping maintain stable, manageable performance.
A high-performance DFB laser and PIN/TIA receiver are included with this LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module. The wavelength pair is properly matched for reliable bidirectional transmission with robust EMI resistance and low bit error rates over extended distances.
When reliable long-distance performance is needed, the LINK-PP LS-BL31552G-40C offers a practical and stable solution for 2.5Gbps connectivity across campus environments, telecom infrastructure, and enterprise networks.
By accurately pairing 1310nm transmit and 1550nm receive wavelengths, this LINK-PP LS-BL31552G-40C module ensures stable, low-interference transmission, supporting long-distance communication with excellent signal clarity and efficiency over single-mode fiber.
Built for extended reach, the LINK-PP LS-BL31552G-40C 2.5G SFP BiDi module delivers up to 40km transmission over single-mode fiber with stable signal integrity, ideal for metro and backbone networks requiring reliable long-distance links.
The simplex LC interface allows both transmit and receive signals to operate through a single connector. This reduces fiber usage, simplifies cabling layouts, and lowers deployment and maintenance costs.
Equipped with Digital Optical Monitoring (DOM), the LINK-PP LS-BL31552G-40C module enables real-time monitoring of parameters such as temperature, voltage, transmit power, and receive power to promote proactive maintenance and accelerate fault diagnosis.
| Εικόνες | ΤΑΥΤΟΤΗΤΑ# | Περιγραφή | Τιμή | στοκ | Προσθήκη στο καλάθι |
Q: What SFF diagnostic standards are used for DDM readouts on this BiDi module, and can I read transmit power levels via SNMP? Από τον/την R***r on 2026-05-04
A: The module integrates Digital Diagnostics Monitoring (DDM/DOM) in full compliance with SFF-8472, enabling real-time monitoring of TX output power, RX input power, laser bias current, module supply voltage, and internal temperature via standard switch SNMP MIBs. Από τον διαχειριστή on 2026-05-05
Q: Does the 40km distance rating require a minimum fiber optical attenuation or optical attenuator for short-distance testing on a bench? Από τον A***n on 2026-02-26
A: Yes, because the optical transmitter is calibrated for long-reach 40km spans, connecting this module directly on a short patch cable (e.g., under 5km) without an optical attenuator (typically 5dB to 10dB) may saturate or damage the sensitive optical receiver. Από τον διαχειριστή on 2026-02-27
Q: How do I select the correct counter-part optical module to pair with this 1310nm-TX / 1550nm-RX BiDi transceiver on a single fiber strand? Από C***s on 2025-01-17
A: To establish a functional link over a single fiber strand, the opposite end of the fiber link must use a complementary BiDi module that transmits at 1550nm and receives at 1310nm (1550nm-TX / 1310nm-RX 2.5G BiDi SFP 40km). Από τον διαχειριστή on 2025-01-17
Q: Will this simplex LC BiDi module work with APC (Angled Physical Contact) polished fiber jumpers or only UPC/PC polished jumpers? By H***k on 2024-12-14
A: The optical interface uses a standard blue Simplex LC/UPC connector. For optimal optical return loss and minimal insertion loss, it should be connected to LC/UPC polished single-mode fiber patch cables rather than green LC/APC connectors. Από τον διαχειριστή on 2024-12-14
Q: Can this 2.5G SFP BiDi transceiver auto-negotiate down to standard 1Gbps or 100Mbps speeds on legacy switch ports? Από τον/την E***s on 2024-03-19
A: No, this module operates at a fixed data rate of 2.5Gbps (SONET OC-48 / 2.5G Ethernet). Both the switch port and the optic on the far end must support native 2.5G rate for the link to negotiate and establish connection. Από τον διαχειριστή on 2024-03-20
{{reply_items.topic || reply_items.text}}By {{reply_items.author}}
{{item.displayed_price.unit_prefix}} {{item.displayed_price.value}} / {{item.displayed_price.unit_type_name}}
{{item.sold_num}} ΠωληθείUnited States
Μεταφορέας
Παρακολούθηση Χρόνου Παράδοσης Κόστους
Εταιρεία
Κόστος Χρόνου
{{ shipitem.name }}
{{ (shipitem.isfree =='1' || shipitem.price == 0)? 'Free Shipping' :detail_data.currency.unit_prefix+shipitem.price }} Προς διαπραγμάτευση {{shipitem.datemin}}-{{shipitem.datemax}} ημέρες Διαθέσιμος