GP-SFP2-1T-C is a commercial-grade 100BASE-T SFP copper transceiver module engineered with a compact RJ-45 connector and a fully metallic, low-EMI enclosure, delivering efficient 100m data transmission over Category 5 unshielded twisted-pair cabling within an operating temperature range of 0°C to 70°C while maintaining a remarkably low typical power dissipation of just 0.5W.
Dell Part Number
GP-SFP2-1T-C
Vendor Name
LINK-PP
Form Factor
SFP
Max Data Rate
100Mbps
Media
Cat 5/Cat 6/Cat 6a
Max Cable Distance
100m
Connector
RJ-45
DOM Support
No
Operating Temperature Range
0 to 70°C
Protocols
MSA Compliant
Key Features of Dell GP-SFP2-1T-C Compatible LINK-PP 100BASE-T SFP
Dell GP-SFP2-1T-C Compatible LINK-PP module is a 100BASE-T copper SFP transceiver module designed for stable Fast Ethernet deployments over existing category 5 twisted-pair infrastructure. Operating between 0°C and 70°C, it draws a typical power dissipation of just 0.5 W while its fully metallic enclosure limits electromagnetic interference. This hot-pluggable hardware provides a reliable physical layer link without adding unnecessary thermal or power overhead to host systems.
This module provides host equipment with direct access to the physical layer IC via a 2-wire serial bus. This interface allows the host switch or router to communicate with the internal transceiver PHY for basic configuration and link status initialization. It ensures accurate hardware-level synchronization across multi-vendor networking platforms compliant with SFP multi-source agreements.
GP-SFP2-1T-C: 100 Mbps Connectivity for Copper Infrastructure Links
The transceiver locks into a 100Mbps signaling rate to support legacy hardware integration and dedicated enterprise terminal connections. It delivers consistent Fast Ethernet throughput on copper backbones where higher-speed optical upgrades are structurally or economically impractical. This targeted transmission profile helps maintain uniform line speeds across specific local area network segments.
GP-SFP2-1T-C Module Supporting 100m Transmission
The transceiver architecture supports link distances of up to 100m over unshielded twisted-pair category 5 cabling. It manages signal attenuation over this maximum distance within strict physical limits, ensuring data integrity without packet loss. This 100m range is fully sufficient for horizontal corporate floor plans and intra-rack connections.
GP-SFP2-1T-C Module with RJ45 Interface
An integrated, compact RJ-45 connector assembly allows the module to accept standard copper patch cords for instant deployment. The mechanical enclosure fits tightly into standard SFP ports to preserve high port density on dense patch panels and edge switches. This mechanical interface eliminates the need for fiber media converters or expensive specialized tooling during installation.
Dell GP-SFP2-1T-C Compatible LINK-PP module is manufactured under strict ISO 9001 quality management systems and carries CE, RoHS, and FCC markings to meet global safety and environmental requirements.
Each module undergoes rigorous factory screening, including physical layer signal validation and thermal workload testing, to prevent early component failure.
GP-SFP2-1T-C Quality Certifications
These industrial credentials verify that the transceiver housing meets strict structural standards for low electromagnetic emissions and hazardous material restrictions.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
GP-SFP2-1T-C Certified for Reliable Host-Device Compatibility
Built strictly to SFP multi-source agreement dimensions, this hardware interfaces smoothly with enterprise switch ports without triggering firmware rejection errors.
Comprehensive physical layer validation guarantees consistent network connectivity, and complete methodology guidelines can be reviewed through the LINK-PP Test Support Center.
Electrical Performance Test
Validate circuit voltage ranges and module power usage limits.
Eye Pattern Test
Inspect optical waveform geometry to check signal distortion metrics.
Bit Error Rate Test
Check transmission data streams for structural frame drop errors.
Temperature Test
Assess module durability during continuous thermal operational workload cycles.
Product Shipping for Dell GP-SFP2-1T-C Compatible LINK-PP 100BASE-T SFP
Secure logistical handling preserves hardware integrity during transit. Reliable transit networks ensure your orders arrive safely and promptly.
Anti-Static Protective Packaging
Shield vulnerable internal circuitry from static electricity damage during handling.
Shock-Resistant Transport Protection
Defend structural module components against physical impact and vibration.
Fast Order Processing and Dispatch
Accelerate order preparation workflows to minimize initial handling delays.
Global Logistics and International Delivery
Coordinate expedited worldwide distribution networks for timely terminal delivery.
Deploying the GP-SFP2-1T-C 100BASE-T copper module is seamless via its hot-pluggable SFP interface and standard RJ-45 connection. This module is ideal for integrating legacy enterprise hardware, connecting industrial automation networks, and linking commercial edge devices, ensuring steady 100Mbps data routing across existing copper infrastructures.
GP-SFP2-1T-C Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal GP-SFP2-1T-C module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
No, because the LP-01-TC is a pure electrical copper transceiver module, it does not utilize optical components. Consequently, digital optical monitoring (DOM/DDM) telemetry is not supported on this standard copper module. By
admin
A:
Yes, the module conforms entirely to standard hot-plugging SFP specifications. You can insert or extract the transceivers from active switch cages without interrupting other live network lines. By
admin
A:
Yes, the LP-01-TC is optimized to perform over standard unshielded twisted pair (UTP) Cat5 and Cat5e infrastructure. It maintains a clean signal up to the full specified 100-meter threshold. By
admin
A:
No, the LP-01-TC is engineered with a low-power electrical architecture to minimize heat generation. It runs cool and safely within regular indoor commercial server closet environments. By
admin
A:
No, the LP-01-TC is designed exclusively with an RJ-45 copper port interface for electrical twisted-pair lines. It cannot be integrated with single-mode or multi-mode optical fiber cabling. By
admin
Good purchasing experience. Needed these 100BASE-T SFP Copper modules for a specific localized industrial controller automation array. They are heavy-duty, fit snugly into the SFP cages, and latch securely. No physical layer frame drops recorded over 48 hours of stress testing.
Please write comments with more than three
character.
491560
554455
R***w
New Zealand
Verified
Purchase
5 .0
2026-04-07
As an infrastructure contractor, I purchased a volume order of these transceivers to support localized access control systems across multiple regional warehouses. These field locations rely on fixed copper twisted-pair cabling runs varying from 30 to 90 meters in length. The implementation was completely hassle-free, and the link parameters correctly locked at 100Mbps Full Duplex with zero data jitter. The commercial-grade operating temperature range is a perfect match for our indoor equipment cabinets. Sourcing from LINK-PP saved us a great deal of our budget. (´∀｀)♡
Please write comments with more than three
character.
491560
554453
T***n
Brunei Darussalam
Verified
Purchase
5 .0
2026-02-04
Excellent copper SFP solution. Placed these into our multi-tenant office building setups to link legacy point-of-sale systems back to a central managed distribution layer. Link stability is solid, power consumption is minimal, and standard Cat5 cables click tightly into the RJ-45 socket.
Please write comments with more than three
character.
491560
554458
G***n
Ukraine
Verified
Purchase
4 .0
2026-01-11
Decent copper RJ-45 transceivers for the price. They achieve the full 100BASE-T 100m reach specification nicely on our corporate legacy lines. The build is good, though the metal pull-tab latch felt slightly stiff on the first couple of installations. Once inside the SFP port, they run completely stable. Good value for bulk enterprise buyers. (•‿•)
Please write comments with more than three
character.
491560
554452
J***n
Argentina
Verified
Purchase
5 .0
2025-11-30
Great quality assurance from LINK-PP. The LP-01-TC matches our strict operational criteria for standard Fast Ethernet transceivers. Sits perfectly inside commercial-grade enterprise switch ports. It operates cleanly within standard temperature baselines for local enterprise server closets.
Please write comments with more than three
character.
491560
554459
N***r
United States
Verified
Purchase
4 .0
2025-10-28
The copper RJ-45 SFP modules are highly reliable and resolved our legacy printer connection issue instantly. My only minor critique is that standard delivery took an extra two days to arrive at our West Coast site. The supplier's support team was highly responsive, and the hardware quality makes up for the brief wait. Will order again well in advance!
Please write comments with more than three
character.
491560
554450
K***r
Libyan Arab Jamahiriya
Verified
Purchase
5 .0
2025-08-09
Finding legitimate 100M copper SFP modules that handle legacy Fast Ethernet properly can be hit-or-miss with some modern high-end enterprise switches. LINK-PP nailed it with the LP-01-TC. Latch mechanics feel secure, insertion is smooth, and thermal performance remains cool within regular indoor environmental racks. Keep up the great work!
Please write comments with more than three
character.
491560
554456
G***l
Cambodia
Verified
Purchase
5 .0
2025-05-12
This is our third batch order of LINK-PP network transceivers. We use them primarily for corporate networks where client workstations require localized legacy drops. The build quality matches expensive first-party modules at a fraction of the cost. Shipping was punctual and documentation is clear.
Canada · English · CAD
