DW-SFP10G40-61 SFP+ transceiver delivers 10GBASE-DWDM connectivity at 1528.77nm (C61 on the 100GHz ITU C-band grid). Equipped with a cooled EML laser and PIN photodiode, it achieves up to 40km reach over single-mode fiber alongside real-time digital diagnostic monitoring.
FS Part Number
DW-SFP10G40-61
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1528.77nm
Max Cable Distance
40km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
PIN
TX Power
-1 to +2dBm
RX Power
-16 to -1dBm
Receiver Sensitivity
-15.5dBm
DDM/DOM
Supported
Operating Temperature Range
0°C to +70°C
Protocols
SFP+ MSA, CPRI, eCPRI, SFF-8472, SFF-8431
Key Features of FS DW-SFP10G40-61 Compatible LINK-PP 10G SFP+
FS DW-SFP10G40-61 Compatible LINK-PP module is a commercial-grade DWDM 10G SFP+ transceiver engineered for dependable 40km single-mode fiber transport. It brings together standard-compliant modular hardware, high-density optical multiplexing, and built-in diagnostic monitoring to support modern network infrastructures.
The module features a hot-pluggable SFP+ form factor that enables convenient installation or replacement without disrupting host system operations. Full compliance with the SFP+ Multi-Source Agreement (MSA) ensures seamless compatibility across standard networking switches and routers.
DW-SFP10G40-61: 10 Gbps Connectivity for Telecom Aggregation Links
A steady transmission speed of 10Gbps provides the reliable throughput needed to handle heavy traffic flows across provider networks. This data rate makes it an effective choice for aggregating distributed subscriber traffic into central telecommunications hubs.
DW-SFP10G40-61 Module with DWDM Technology for Fiber Efficiency
Dense wavelength division multiplexing allows multiple data signals to travel across a single fiber strand by utilizing separate optical channels. This multiplexing capability helps operators significantly expand existing link bandwidth without investing in new fiber cabling.
DW-SFP10G40-61 Module with 1528.77nm Wavelength
Operating at a fixed center wavelength of 1528.77nm aligns the transmission with channel C61 of the standard 100GHz ITU-T grid. This dedicated spectral channel keeps signals well defined and prevents mutual interference in multi-channel optical systems.
A rated link reach of up to 40km over standard single-mode fiber delivers reliable medium-to-long distance connectivity. It enables clean signal delivery between distant facilities without requiring intermediate optical signal amplification.
DW-SFP10G40-61 Module with Duplex LC Interface
The built-in duplex LC optical receptacle guarantees a firm, low-loss connection for transmit and receive fiber patch cables. Its standard compact geometry simplifies cable routing and fits easily into high-density fiber patch fields.
DW-SFP10G40-61 Module with DDM for Real-Time Monitoring
Integrated digital diagnostic monitoring gives technicians immediate access to vital operating metrics like module temperature, optical power, and bias current. Continuous parameter tracking allows engineers to spot potential link issues early and keep connections stable.
FS DW-SFP10G40-61 Compatible LINK-PP DWDM transceiver is manufactured under rigorous quality systems and complies with international standards, holding certifications including ISO 9001, CE, RoHS, and FCC.
Each 10G SFP+ DWDM module undergoes comprehensive optical and electrical evaluations to verify dependable hardware stability before field deployment.
DW-SFP10G40-61 Quality Certifications
These recognized industry credentials ensure the transceiver meets strict worldwide safety, environmental, and manufacturing compliance guidelines.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DW-SFP10G40-61 Certified for Reliable Host-Device Compatibility
Extensive interoperability testing guarantees plug-and-play operation and stable communication across mainstream switches, routers, and transport platforms.
Every DW-SFP10G40-61 DWDM SFP+ transceiver undergoes stringent factory verification to guarantee rock-solid signal integrity and field durability. Explore our full validation procedures at the LINK-PP Test Support Center.
Optical Spectrum Test
Measure central wavelength accuracy to verify compliant channel spacing stability.
Eye Pattern Test
Analyze optical signal quality to confirm clean transmission waveforms consistently.
Bit Error Rate Test
Evaluate data transmission accuracy to ensure flawless packet delivery throughput.
Temperature Test
Assess thermal endurance ranges to maintain steady operation under stress.
Product Shipping for FS DW-SFP10G40-61 Compatible LINK-PP 10G SFP+
We use secure packaging and reliable courier services to ensure every DW-SFP10G40-61 10G DWDM module arrives in perfect condition. Our streamlined fulfillment system enables prompt dispatch and dependable worldwide delivery for all orders.
Anti-Static Protective Packaging
Shield delicate electronic components to prevent electrostatic damage during handling.
Shock-Resistant Transport Protection
Protect modules from physical impacts to ensure safe transit journeys.
Fast Order Processing and Dispatch
Handle incoming customer orders quickly to facilitate prompt warehouse dispatch.
Global Logistics and International Delivery
Partner with international carriers to provide reliable worldwide shipping.
Simply slot the DW-SFP10G40-61 DWDM transceiver into your host switch, attach duplex LC patch cords, and monitor link parameters via real-time DDM. It seamlessly integrates into carrier multiplexers, delivering dependable 10Gbps transport to consolidate diverse regional traffic across high-density telecom aggregation links.
DW-SFP10G40-61 Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal DW-SFP10G40-61 module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Yes, as long as the multiplexer port matches the ITU C-band channel wavelength of this module. It integrates seamlessly into standard 100GHz DWDM passive Mux/Demux filters. by LINK-PP Technical Support
Yes, each transceiver ships sealed in anti-static packaging with a tight-fitting dust cap inserted to keep both LC optical bores clean during shipping and handling. by LINK-PP Technical Support
Yes, if you are connecting through a DWDM Mux/Demux, both sides must use this exact wavelength channel to route through the matching ports on the filter. by LINK-PP Technical Support
Installed this 1528.77nm 100GHz DWDM SFP+ transceiver in a switch-to-switch link across our industrial park. Fiber distance is about 35km, with multiple splice points. We saw no CRC errors after continuous traffic testing, and the optical budget was easy to confirm from DDM.
Australia · English · AUD
