DW-SFP10G40-59 operates on the 100GHz ITU C-band grid at 1530.33nm (C59) as a 10GBASE-DWDM transceiver, leveraging a cooled EML laser and PIN receiver to achieve up to 40km reach over single-mode fiber. The module features integrated real-time digital optical monitoring, allowing network operators to supervise operational status and link health effortlessly.
FS Part Number
DW-SFP10G40-59
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1530.33nm
Max Cable Distance
40km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
PIN
TX Power
-1 to +2dBm
RX Power
-16 to -1dBm
Receiver Sensitivity
-15.5dBm
DDM/DOM
Supported
Operating Temperature Range
0°C to +70°C
Protocols
SFP+ MSA, CPRI, eCPRI, SFF-8472, SFF-8431
Key Features of FS DW-SFP10G40-59 Compatible LINK-PP 10G SFP+
FS DW-SFP10G40-59 Compatible LINK-PP module is a DWDM SFP+ transceiver delivering 10Gbps connectivity across single-mode fiber infrastructure. Operating at a 1530.33nm wavelength with integrated diagnostics and extended reach, it combines wavelength-division multiplexing efficiency with reliable hardware standards for modern optical links.
The module features a hot-pluggable SFP+ footprint that enables fast, seamless installation into network switches without powering down the host system. Full compliance with the SFP+ Multi-Source Agreement (MSA) ensures seamless mechanical fit and broad multi-vendor interoperability.
DW-SFP10G40-59: 10 Gbps Connectivity for Long-Reach Metro Links
This DWDM module provides steady 10Gbps data rates designed for long-distance metropolitan networks and aggregation links. This consistent capacity easily supports heavy traffic between remote campus sites and regional facilities.
DW-SFP10G40-59 Module with DWDM Technology for Fiber Efficiency
Dense Wavelength Division Multiplexing channels multiple discrete signals over existing single-mode fiber pairs with a 100GHz grid spacing. Network operators can massively scale their transmission capacity without the costly expense of trenching new optical fiber.
DW-SFP10G40-59 Module with 1530.33nm Wavelength
Channel C59 alignment operates precisely at 1530.33nm within the standard ITU-T 100GHz C-band spectrum. Stable wavelength positioning enables smooth integration alongside adjacent multiplexed channels without channel bleed or inter-band crosstalk.
The internal EML laser and sensitive PIN receiver architecture maintain optical link integrity across distances up to 40km. This extended reach bridges remote hubs and metropolitan distribution points without requiring intermediate optical amplification.
DW-SFP10G40-59 Module with Duplex LC Interface
A duplex LC optical receptacle provides quick and secure latching to single-mode patch cords. Its compact footprint maximizes port density on high-count faceplates while minimizing optical insertion loss.
DW-SFP10G40-59 Module with DOM for Real-Time Monitoring
Integrated digital optical monitoring (DOM) continuously tracks vital operating parameters including optical transmit/receive power, supply voltage, laser bias current, and internal temperature. Administrators can review these real-time telemetry metrics to proactively address line degradation before service interruptions occur.
The FS DW-SFP10G40-59 Compatible LINK-PP 10G DWDM transceiver complies with key international standards including ISO 9001, CE, RoHS, and FCC to ensure verified safety, environmental, and manufacturing quality.
Every DWDM SFP+ module undergoes rigorous hardware and optical tests before shipping to guarantee consistent link stability and zero-defect delivery.
DW-SFP10G40-59 Quality Certifications
These recognized credentials validate that the optical module meets strict global safety guidelines and eco-friendly manufacturing requirements.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DW-SFP10G40-59 Certified for Reliable Host-Device Compatibility
Each DWDM transceiver is thoroughly tested in major branded switches and routers to ensure effortless plug-and-play operation without system errors.
Every DW-SFP10G40-59 SFP+ DWDM transceiver undergoes strict hardware and optical inspections to guarantee stable signal transmission in demanding environments. Learn more about our detailed validation procedures at the LINK-PP Test Support Center.
Optical Spectrum Test
Verify central wavelength precision to ensure clean optical transmission.
Eye Pattern Test
Inspect optical signal clarity to guarantee minimal jitter levels.
Bit Error Rate Test
Check data transmission accuracy to prevent packet loss issues.
Temperature Test
Assess thermal stability limits to maintain uninterrupted daily operation.
Product Shipping for FS DW-SFP10G40-59 Compatible LINK-PP 10G SFP+
Each DW-SFP10G40-59 10G DWDM module is carefully packaged and processed through dependable logistics channels to ensure safe arrival. Our streamlined fulfillment workflow guarantees that every order reaches your facility quickly and securely.
Anti-Static Protective Packaging
Prevent electrostatic discharge damage to safeguard delicate optical components.
Shock-Resistant Transport Protection
Absorb transit impacts effectively to preserve internal hardware integrity.
Fast Order Processing and Dispatch
Handle incoming customer orders quickly to reduce overall handling delays.
Global Logistics and International Delivery
Ship optical modules through trusted carriers to ensure timely global arrival.
Plug the DW-SFP10G40-59 hot-swappable DWDM module into your switch and patch it into the corresponding 1530.33nm port on an optical multiplexer using single-mode duplex LC fiber. It immediately multiplexes high-capacity 10Gbps traffic across long-reach metro links, expanding city-wide transmission bandwidth without deploying new fiber infrastructure.
DW-SFP10G40-59 Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal DW-SFP10G40-59 module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
The nominal optical power budget is 14.5dB, calculated from -1dBm minimum TX power and -15.5dBm receiver sensitivity. Keep total link loss below this value and leave extra margin for connectors, splices, DWDM filters, and future fiber aging. by LINK-PP Technical Support
For a standard point-to-point duplex link, both ends typically use matched optical wavelengths or feed into corresponding mux/demux channel ports. If you are going through a DWDM filter, both endpoints must match the specific C59 channel routing. by LINK-PP Technical Support
The EML transmitter supports stable 10G transmission on its assigned C59 1530.33nm channel. However, adjacent-channel crosstalk is determined by the complete DWDM system, especially the Mux/Demux isolation, filter quality, wavelength alignment, and channel power balance. by LINK-PP Technical Support
Bought several LS-DW5910-40C optical modules for a small data center DWDM refresh. They seated properly in our SFP+ ports and showed consistent TX and RX readings. These 40km SFP+ optics saved us from adding another active site in the middle.
Please write comments with more than three
character.
498428
527163
M***z
Argentina
Verified Purchase
5.0
2026-08-02
Upgraded our secondary core switch connection over single-mode fiber. The built-in EML transmitter holds steady throughput during heavy daytime traffic.
Please write comments with more than three
character.
498428
527160
D***r
Libyan Arab Jamahiriya
Verified Purchase
5.0
2026-07-11
Perfect transceiver option for expanding capacity on our 100GHz passive DWDM grid without running extra fiber. The 1530.33nm channel paired seamlessly with our existing mux port, giving us clean 10G throughput across our metro loop.
Australia · English · AUD
