DW-SFP10G80-17-I is a 10G DWDM SFP+ optical module operating at 1563.86nm (C17, 100GHz ITU grid) and equipped with a cooled C-band EML laser and APD photodiode for up to 80km transmission over single-mode fiber (SMF). It also supports real-time digital diagnostic monitoring (DDM) for continuous optical performance tracking.
FS Part Number
DW-SFP10G80-17-I
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1563.86nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
-40 to +85°C
Protocols
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of FS DW-SFP10G80-17-I Compatible LINK-PP 10G SFP+
FS DW-SFP10G80-17-I Compatible LINK-PP brings 10GBASE-DWDM capability to demanding industrial sites that need dependable extended-range links. Working on the fixed 1563.86nm wavelength, it easily handles 10Gbps traffic up to 80km over single-mode fiber while supporting standard duplex LC cabling and real-time diagnostic monitoring.
This DWDM module features a hot-pluggable SFP+ footprint that allows easy installation and replacement without turning off the host device. It fully complies with the SFP+ MSA standard to ensure smooth compatibility with various switches and routers.
DW-SFP10G80-17-I: 10 Gbps Connectivity for Industrial Optical Aggregation
A steady 10Gbps data rate provides ample bandwidth to gather and process traffic from multiple field devices. It keeps industrial aggregation switches running smoothly without network lag or data bottlenecks.
DW-SFP10G80-17-I Module with DWDM Technology for Fiber Efficiency
DWDM technology allows multiple data channels to run over the same single-mode fiber at different optical wavelengths. This significantly increases total network capacity without the need to lay or rent extra fiber cables.
DW-SFP10G80-17-I Module with 1563.86nm Wavelength
The 1563.86nm wavelength corresponds to ITU Channel 17 on the standard 100GHz optical grid. Its cooled EML laser keeps this optical wavelength stable and prevents signal interference with neighboring channels.
An internal APD receiver captures faint optical signals to support transmission distances of up to 80km on standard single-mode fiber. This long reach lets network operators bridge distant industrial sites directly without adding optical repeaters.
DW-SFP10G80-17-I Module with Duplex LC Interface
The industry-standard duplex LC connector provides a firm, low-loss physical connection with common single-mode fiber patch cords. Its compact latching design makes fiber cabling clean and easy to manage inside crowded patch panels.
DW-SFP10G80-17-I Module with DDM for Real-Time Monitoring
Built-in Digital Diagnostic Monitoring (DDM) gives engineers instant visibility into operating temperature, laser bias current, supply voltage, and optical power. These live status readings make it simple to detect optical issues early and prevent unexpected downtime.
FS DW-SFP10G80-17-I Compatible LINK-PP 10G DWDM transceiver module is fully backed by international standards including ISO 9001, CE, RoHS, and FCC to ensure exceptional build quality, safety, and environmental compliance.
Each SFP+ DWDM module undergoes rigorous optical, electrical, and thermal stress tests before shipment to verify reliable continuous operation under industrial conditions.
DW-SFP10G80-17-I Quality Certifications
These formal approvals confirm that the transceiver fully complies with international standards for safe operation, low electromagnetic interference, and eco-friendly manufacturing.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DW-SFP10G80-17-I Certified for Reliable Host-Device Compatibility
Comprehensive interoperability testing ensures seamless plug-and-play performance across mainstream switches, routers, and industrial networking hardware without software errors.
Every DW-SFP10G80-17-I 10G DWDM SFP+ transceiver undergoes strict hardware and optical verification to guarantee dependable data transmission in harsh field conditions. To explore our comprehensive validation process, visit the LINK-PP Test Support Center.
Optical Spectrum Test
Check central wavelength accuracy to prevent DWDM channel crosstalk.
Eye Pattern Test
Analyze signal waveform clarity to prevent optical transmission jitter.
Bit Error Rate Test
Confirm error-free data packet forwarding across long-distance fiber spans.
Temperature Test
Validate stable transceiver operation across wide industrial temperature swings.
Product Shipping for FS DW-SFP10G80-17-I Compatible LINK-PP 10G SFP+
Every DW-SFP10G80-17-I SFP+ DWDM module is packed and handled with care to arrive safely at your site. Reliable shipping workflows ensure prompt dispatch and timely arrival for projects worldwide.
Anti-Static Protective Packaging
Prevent electrostatic discharge damage to protect sensitive internal electronic circuits.
Shock-Resistant Transport Protection
Shield each optical transceiver from external impacts during rough transit.
Fast Order Processing and Dispatch
Prepare and confirm outbound customer shipments quickly for prompt dispatch.
Global Logistics and International Delivery
Coordinate trusted international carriers to ensure punctual deliveries to customers.
Simply insert the DW-SFP10G80-17-I DWDM transceiver into any SFP+ port until it locks, remove the dust plug, and connect a duplex LC single-mode fiber patch cord. Once aligned to the multiplexer, the link is ready for industrial optical aggregation setups.
DW-SFP10G80-17-I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal DW-SFP10G80-17-I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
If you are connecting directly through a passive DWDM Mux/Demux, both ends must match the dedicated Channel 17 port. If you are doing a direct point-to-point dark fiber test without a mux, matching C17 optics on both sides works great. by LINK-PP Technical Support
Yes, we strongly recommend inspecting and cleaning the LC connector end-faces before mating, especially for 80km links where even tiny dust specks can cause notable insertion loss. by LINK-PP Technical Support
It's a fixed-wavelength optical module locked to Channel 17 (1563.86nm), so you can't tune it to other channels. If you need to hit C17 on your Mux, this is the exact one you want. by LINK-PP Technical Support
Installed these SFP+ modules in our outdoor cell site router for base station backhaul. The industrial temperature rating from -40°C to 85°C was the main selling point for us, and they run super stable in harsh weather :-)
Please write comments with more than three
character.
498474
526878
L***n
Australia
Verified Purchase
5.0
2026-01-24
We used this 10GBASE-DWDM SFP+ transceiver for a 70km campus-to-campus connection. The Duplex LC ports matched our existing patch panel, and the link has stayed clean with no unexpected drops.
United Kingdom · English · GBP
