LS-MM311G-02AI combines a 1310nm FP laser and PIN photo detector within a hot-pluggable 1G SFP form factor, supporting multi-mode fiber links up to 2km. Designed for harsh environments, the module supports real-time digital diagnostic monitoring (DDM) and operates reliably across temperatures from -40°C to +85°C.
LINK-PP Part Number
LS-MM311G-02AI
Vendor Name
LINK-PP
Form Factor
SFP
Max Data Rate
1.25Gbps
Wavelength
1310nm
Max Cable Distance
2km
Connector
Duplex LC
Media
MMF
Transmitter Type
FP
Receiver Type
PIN
TX Power
-12 to -3dBm
RX Power
-23 to -1dBm
Receiver Sensitivity
-30dBm
DDM/DOM
Supported
Operating Temperature Range
-40 to 85°C
Protocols
SFF-8472 MSA IEEE 802.3
Key Features of LINK-PP LS-MM311G-02AI 1G SFP
LINK-PP LS-MM311G-02AI is an industrial-grade optical transceiver designed to deliver stable 1Gbps data links over multimode fiber. It combines a 1310nm operating wavelength, 2km reach, standard duplex LC interface, and integrated digital diagnostic monitoring into a rugged, hot-pluggable form factor.
LINK-PP LS-MM311G-02AI 1G SFP Optical Module
This transceiver utilizes a hot-pluggable footprint that allows seamless installation and replacement without powering down host equipment. Full compliance with SFP MSA standards ensures broad hardware compatibility across multi-vendor networking switches and routers.
LS-MM311G-02AI: 1 Gbps Connectivity for Outdoor Surveillance Links
Gigabit Ethernet throughput ensures uninterrupted and low-latency bandwidth for continuous high-definition video streaming. Such reliable 1Gbps transmission makes it well-suited for remote outdoor surveillance cameras and perimeter monitoring networks.
LS-MM311G-02AI Module with 1310nm Wavelength
An integrated 1310nm FP laser transmitter provides an optimal balance between optical signal strength and fiber attenuation. Operating in the 1310nm optical window allows multi-mode systems to achieve greater link stability than standard 850nm alternatives.
LS-MM311G-02AI Module Supporting 2km Transmission
Operating up to 2km allows the transceiver to connect distributed equipment across building floors and plant facilities over standard multi-mode fiber. This medium-span coverage simplifies localized campus cabling without needing extra repeaters.
LS-MM311G-02AI Module with Duplex LC Interface
Industry-standard duplex LC optical connectors provide a secure, low-loss physical connection with positive latching mechanisms. The compact connector footprint helps maximize port density on patch panels and industrial switch faceplates.
LS-MM311G-02AI Module with DDM for Real-Time Monitoring
Built-in digital diagnostic monitoring (DDM) gives network operators direct visibility into operating parameters such as optical power, temperature, and bias current. Compatibility with SFF-8472 diagnostic standards simplifies remote link tracking and proactive fault isolation.
LINK-PP LS-MM311G-02AI 1G SFP Certification
LINK-PP LS-MM311G-02AI 1G SFP module meets stringent international standards, holding certifications including ISO 9001, CE, RoHS, and FCC. These official approvals ensure strict manufacturing quality, environmental safety, and electromagnetic compliance for industrial operations.
Every optical module undergoes rigorous factory testing, including bit error rate checks and thermal cycling tests. This comprehensive screening process ensures stable optical performance and hardware reliability before shipping.
LS-MM311G-02AI Quality Certifications
Official certifications verify that the module complies with international electrical, environmental, and physical safety standards. These standardized approvals ensure the optical hardware adheres to documented production guidelines and operational limits.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
LS-MM311G-02AI Certified for Reliable Host-Device Compatibility
Interoperability testing validates that the transceiver communicates reliably with diverse networking host devices. It establishes stable physical layer connections without triggering configuration mismatches or signal recognition failures.
Rigorous Testing Ensures Reliable SFP Performance
LINK-PP LS-MM311G-02AI 1G SFP transceiver undergoes comprehensive optical and thermal evaluations to deliver reliable Gigabit data transmission. For detailed validation procedures, please visit the LINK-PP Test Support Center.
Optical Spectrum Test
Verify central wavelength precision to maintain strict transmission stability.
Eye Pattern Test
Evaluate optical waveform symmetry to eliminate link signal distortion.
Bit Error Rate Test
Detect physical packet loss to guarantee error-free Ethernet throughput.
Temperature Test
Validate operational reliability across extreme thermal ranges without degradation.
Product Shipping for LINK-PP LS-MM311G-02AI 1G SFP
LINK-PP LS-MM311G-02AI SFP modules are packaged and handled with strict care to ensure secure worldwide transit. Standardized shipping protocols protect optical module integrity from our warehouse directly to your facility.
Anti-Static Protective Packaging
Prevent electrostatic discharge damage to protect sensitive internal optical components.
Shock-Resistant Transport Protection
Shield transceivers from mechanical impacts and drops during regular transit.
Fast Order Processing and Dispatch
Prepare and release verified product shipments promptly to minimize lead times.
Global Logistics and International Delivery
Coordinate with leading international carriers to ensure dependable worldwide arrival.
LINK-PP LS-MM311G-02AI 1G SFP Usage Demonstration
Deploying the LINK-PP LS-MM311G-02AI 1G SFP involves simply aligning the module, sliding it into the host cage until latched, and connecting multi-mode fiber. This SFP module delivers stable Gigabit throughput for outdoor surveillance links, ensuring continuous video feeds across remote security perimeters and roadside monitoring systems.
LS-MM311G-02AI Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal LS-MM311G-02AI module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
Yes, it supports real-time DDM (Digital Diagnostic Monitoring) compliant with SFF-8472. Your switch operating system and monitoring tools can directly read internal module temperature, supply voltage, laser bias current, and TX/RX power. By
admin on
2026-02-06
A:
Yes, absolutely. The LS-MM311G-02AI is an industrial-grade transceiver tested for operating case temperatures from -40°C to +85°C. It will cold-boot reliably and maintain full 1.25Gbps optical performance in sub-zero environments without needing an auxiliary heater. By
admin on
2025-11-14
A:
Yes. In addition to 1.25Gbps Gigabit Ethernet systems, the LS-MM311G-02AI module supports 1.063Gbps Fiber Channel rates, making it a drop-in multimode transceiver for storage interconnects and legacy optical systems. By
admin on
2025-04-05
Smooth integration with our Gigabit Ethernet backhaul. The DDM interface reports accurate internal temperatures and bias currents, which makes proactive maintenance a breeze.
Please write comments with more than three
character.
496382
463465
M***r
Thailand
Verified
Purchase
5 .0
2026-05-23
Tested extensively on our industrial switches. Insertion loss over our 1.6km duplex LC run was around 4.2dB, and the transceiver had plenty of margin left. We ran round-the-clock telemetry data without a single CRC error or temperature warning in the logs.
Please write comments with more than three
character.
496382
463482
K***n
Ukraine
Verified
Purchase
5 .0
2026-05-07
Needed a ruggedized multimode transceiver for remote traffic camera poles. With outdoor temps swinging wildly, this -40 to 85C module keeps steady optical power without any flappings. Highly recommended! ;)
Please write comments with more than three
character.
496382
463468
S***n
United Arab Emirates
Verified
Purchase
4 .0
2026-04-23
The transceiver performs great at 1.25Gbps over our multimode link, but customs clearance took two days longer than estimated. Packaged well inside though. :)
Please write comments with more than three
character.
496382
463487
J***m
Russian Federation
Verified
Purchase
5 .0
2026-04-12
Used these to interlink our core rack with a remote storage NAS across the facility. Even through patch panels, optical loss remained minimal, and transfer speeds max out Gigabit throughput consistently.
Please write comments with more than three
character.
496382
463463
Z***l
Libyan Arab Jamahiriya
Verified
Purchase
5 .0
2026-03-18
SFF-8472 compliance is implemented properly on this module. Our NMS system pulls clean optical parameters via DDM, showing stable FP transmitter output at -4.8dBm and temperature tracking perfectly. If you are extending multi-mode fiber beyond standard 850nm reach limits, this 1310nm 2km module is an absolute lifesaver. :D
Please write comments with more than three
character.
496382
463480
L***n
United States
Verified
Purchase
5 .0
2026-02-19
Installed in an unheated solar power monitoring box in North Dakota. The industrial temperature rating handles sub-zero cold starts without any link delay or optical degradation. =D
Please write comments with more than three
character.
496382
463472
K***z
India
Verified
Purchase
5 .0
2026-01-31
Our data-center operations group used this SFP module for a legacy 1G management network rather than the production fabric. It is a solid industrial-temperature option for equipment rooms with imperfect cooling, and DOM showed receive power well above sensitivity. =)
Please write comments with more than three
character.
496382
463485
E***z
Iran, Islamic Republic of
Verified
Purchase
5 .0
2026-01-23
Exactly what we needed for a 1.4km multi-mode run between two production plants. Standard SX optics topped out at 550m, but this 2km 1310nm MMF unit bridged the gap effortlessly. :)
Please write comments with more than three
character.
496382
463470
N***s
Austria
Verified
Purchase
5 .0
2025-12-21
Deployed these 1G multimode SFP modules across our factory floor network. They synced immediately at 1.25Gbps over existing 1.5km runs that standard 850nm SFP modules couldn't reach reliably. Transmission is clean and stable.
Please write comments with more than three
character.
496382
463462
D***r
Spain
Verified
Purchase
5 .0
2025-10-31
Upgraded our perimeter security camera clusters. These transceivers handled 1.25Gbps line rate effortlessly over long multi-mode spans. Having reliable DDM diagnostics over SNMP lets our NOC monitor optical degradation before a truck roll is even required. Highly dependable industrial hardware. :-)
Please write comments with more than three
character.
496382
463486
A***g
Brazil
Verified
Purchase
5 .0
2025-10-11
Clean MSA compliance! SFF-8472 DOM diagnostics show real-time operating temperature and optical power directly on our switch dashboard. Great build quality on the metal housing and latch mechanism.
Please write comments with more than three
character.
496382
463471
J***d
Lithuania
Verified
Purchase
5 .0
2025-09-13
Tested 6 units before mounting them onto trackside communication cabinets. The PIN receiver sensitivity easily tolerated our high-loss legacy connectors down to -30dBm without bit errors. Superb performance. ;-)
Please write comments with more than three
character.
496382
463464
N***s
Israel
Verified
Purchase
5 .0
2025-08-09
Deployed in a roadside communications enclosure for camera aggregation. The FP transmitter and PIN receiver combination has been dependable, while DOM lets us watch receive power remotely before a marginal fiber path becomes a service call.
Please write comments with more than three
character.
496382
463484
E***n
Bulgaria
Verified
Purchase
5 .0
2025-07-21
We rolled out 16 of these LS-MM311G-02AI SFP modules across our industrial rail yard network. Operating in dust-heavy trackside enclosures with summer enclosure ambient temperature reaching 65°C, the units held steady TX/RX power levels with zero frame errors recorded over three months. Outstanding industrial reliability for 1.25G links.
Please write comments with more than three
character.
496382
463479
M***n
Russian Federation
Verified
Purchase
5 .0
2025-07-19
Replaced our old failed transceivers with these LS-MM311G-02AI units for substation switch links. The FP transmitter delivers solid TX levels right around -5dBm, well within specification.
Please write comments with more than three
character.
496382
463469
A***g
Germany
Verified
Purchase
5 .0
2025-06-22
Deployed these for cellular micro-base station backhaul links over legacy OM1 multi-mode fiber. Most 1G SX SFP modules fail beyond 220m, but this 1310nm SFP transceiver maintained rock-solid link budget across 1.1km with -22dBm received power, well clear of the -30dBm sensitivity threshold.
Please write comments with more than three
character.
496382
463481
S***n
New Zealand
Verified
Purchase
5 .0
2025-05-26
Upgraded the fiber backbone of our water treatment facility. These 1G industrial optical modules plugged straight into our hardened switches and established stable connections right away.
Please write comments with more than three
character.
496382
463473
S***l
Malaysia
Verified
Purchase
4 .0
2025-04-28
Excellent optical link budget for our outdoor cabinet setup. Delivery arrived a day late due to a local courier sorting delay, but the optical modules are top-tier.
Please write comments with more than three
character.
496382
463466
F***l
Libyan Arab Jamahiriya
Verified
Purchase
5 .0
2025-03-22
SFP latch feels sturdy, dust caps were intact, and the optical eye pattern looks pristine on our tester. Ideal drop-in transceiver for 1310nm MMF municipal surveillance networks.
Please write comments with more than three
character.
496382
463461
D***n
Austria
Verified
Purchase
5 .0
2025-02-05
We used these industrial-grade 1G SFP optical transceivers for base-station backhaul support equipment. The 2km MMF reach fit the actual route with headroom, and both ends showed consistent optical power after connector cleaning and commissioning.
Please write comments with more than three
character.
496382
463483
J***n
Ukraine
Verified
Purchase
5 .0
2025-01-17
Outstanding optics for legacy fiber retrofit projects. We avoided repulling expensive single-mode fiber through underground ducts by utilizing this 2km 1310nm multimode optical transceiver. Runs flawlessly across our industrial plant!
United Kingdom · English · GBP
