CWDM-SFP10G-10M CWDM module delivers precision-engineered 10G optical connectivity by pairing a 1510nm EML laser with a sensitive PIN photodiode over dual LC single-mode fiber, enabling seamless 10km transmissions alongside continuous digital optical monitoring (DOM) for total link visibility.
Key Features of FS CWDM-SFP10G-10M Compatible LINK-PP 10.7G SFP+
FS CWDM-SFP10G-10M Compatible LINK-PP module is a 10G SFP+ CWDM transceiver built for stable 10km single-mode fiber connections in data center and metro access networks. It brings together a hot-pluggable SFP+ footprint, 10Gbps CWDM channels at 1510nm, duplex LC connectivity, and DOM-based real-time monitoring to support dense, manageable trunking deployments.
CWDM-SFP10G-10M module uses a hot-pluggable SFP+ footprint for easy installation and replacement without powering down the system. It is compliant with the SFP+ MSA and SFF-8472, ensuring broad compatibility with switches, routers, and optical distribution frames.
CWDM-SFP10G-10M: 10 Gbps Connectivity for High-Density Trunking
This optical transceiver delivers 10Gbps data rates, making it suitable for high-density trunking in data centers and enterprise aggregation networks. It supports bandwidth-intensive workloads while maintaining a compact form factor for dense port deployments.
CWDM-SFP10G-10M Module with CWDM Technology for Fiber Efficiency
CWDM technology allows multiple channels to share a single fiber pair, reducing fiber count and cabling complexity. This helps lower deployment costs and improves scalability when expanding network capacity over existing fiber.
CWDM-SFP10G-10M Module with 1510nm Wavelength
Operating at the 1510nm CWDM channel, the module aligns with standard CWDM grids for predictable channel planning and low crosstalk. This wavelength is well suited for metro and campus links where CWDM multiplexers are used.
Designed for single-mode fiber, the transceiver supports links up to 10km, covering most campus and metro access scenarios. It provides stable performance over typical SMF plants while maintaining power budget margins.
CWDM-SFP10G-10M Module with Duplex LC Interface
A duplex LC connector enables simple, reliable mating with common patch panels and equipment ports. The LC interface supports separate transmit and receive paths for full-duplex 10G operation.
CWDM-SFP10G-10M Module with DOM for Real-Time Monitoring
Digital Optical Monitoring (DOM) provides real-time readings of temperature, voltage, bias current, and optical power. These diagnostics help with proactive maintenance, quick fault isolation, and compliance with link quality thresholds.
FS CWDM-SFP10G-10M Compatible LINK-PP module is certified under strict quality standards such as ISO 9001, CE, RoHS, and FCC to support safe and dependable use in network infrastructures.
Each optical transceiver goes through careful testing to check performance, stability, and long-term reliability before shipment.
CWDM-SFP10G-10M Quality Certifications
Our products meet strict industry standards to deliver long-term operational consistency and reduced failure rates in real-world deployments.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
CWDM-SFP10G-10M Certified for Reliable Host-Device Compatibility
Extensively verified across diverse switch and router platforms, this module ensures seamless integration without link errors or system mismatches.
FS CWDM-SFP10G-10M Compatible LINK-PP optical module goes through strict checks to verify stable signal quality and dependable operation in real network use. Learn more at the LINK-PP Test Support Center.
Optical Spectrum Test
Measuring the optical spectrum to confirm accurate wavelength output and clean transmission.
Eye Pattern Test
Analyzing the eye pattern to check signal integrity and overall link quality.
Bit Error Rate Test
Testing bit error rate to make sure data stays accurate during transmission.
Temperature Test
Verifying stable performance across different operating temperatures and conditions.
Product Shipping for FS CWDM-SFP10G-10M Compatible LINK-PP 10.7G SFP+
FS CWDM-SFP10G-10M Compatible LINK-PP module is packed and shipped with care to help keep each module safe during transit. Fast handling and reliable delivery support smooth order fulfillment.
Anti-Static Protective Packaging
Using anti-static packaging to protect the module during handling and shipping.
Shock-Resistant Transport Protection
Adding transport protection to reduce impact during delivery.
Fast Order Processing and Dispatch
Processing orders quickly to help customers receive products sooner.
Global Logistics and International Delivery
Supporting global shipping with dependable international delivery service.
FS CWDM-SFP10G-10M Compatible LINK-PP optical module is designed for quick deployment in compatible SFP+ equipment, helping users build stable 10G CWDM links with minimal setup effort. It is well suited for fiber connection scenarios that require efficient bandwidth use and flexible network expansion.
CWDM-SFP10G-10M Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal CWDM-SFP10G-10M module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
The LS-CW5110-10C can be a direct replacement if the existing optic is a 10G CWDM SFP+ module using the 1510nm wavelength and duplex LC single-mode fiber. It is built to the SFP+ MSA standard, but compatibility can still vary by switch brand and model. Please confirm your exact device model before ordering, and make sure the module at the far end also uses the 1510nm CWDM channel. By
admin on
2026-03-11
A:
Yes, the LS-CW5110-10C module is suitable for LTE backhaul and other 10G CWDM optical links. It supports 10Gbps transmission over single-mode fiber up to 10km and uses the 1510nm CWDM channel, making it a practical option for connecting LTE baseband equipment, aggregation switches, or remote network sites through a compatible CWDM MUX/DEMUX system. By
admin on
2025-07-25
A:
Yes. The 1510nm wavelength is intended for 10G CWDM optical systems and can be used with a compatible passive CWDM MUX/DEMUX that includes the 1510nm channel. By
admin on
2025-02-20
Please write comments with more than three
character.
494849
436302
Y***s
Sweden
Verified
Purchase
5 .0
2026-05-17
This 1510nm CWDM 10G SFP+ module is a good fit for a shared-fiber project. It runs at 10G and works neatly alongside other CWDM wavelengths in the same optical transport path. We also appreciated the low power draw in a high-density switch.
Please write comments with more than three
character.
494849
436307
X***n
Mexico
Verified
Purchase
5 .0
2026-03-18
Bought this CWDM module for a customer’s multi-building network where fiber pairs are limited. The 1510nm channel helped us expand the existing CWDM system instead of pulling new cable. Performance has been steady during normal office hours and backup traffic windows.
Please write comments with more than three
character.
494849
436305
E***d
Russian Federation
Verified
Purchase
4 .0
2026-03-01
The module itself works well on a 5km SMF link and DOM data looks normal. Packaging was a little more basic than we expected for an optic, but the protective cap and anti-static protection were fine. Good value overall.
Please write comments with more than three
character.
494849
436310
Z***r
Italy
Verified
Purchase
5 .0
2026-02-13
Ordered a small batch for an enterprise network refresh project. All units were clearly marked as 1510nm, installed quickly in SFP+ slots, and came online without manual configuration. Great for organized CWDM deployments.
Please write comments with more than three
character.
494849
436299
G***z
Malaysia
Verified
Purchase
4 .0
2026-01-23
Great 10G SFP+ module for a 10km single-mode fiber link and it integrated smoothly into our CWDM MUX setup. One box was lightly scuffed from transit, so we would prefer a bit more padding for bulk orders, but all modules tested passed.
Please write comments with more than three
character.
494849
436312
J***t
New Zealand
Verified
Purchase
5 .0
2026-01-10
Our network operations team tested these modules in a multi-vendor 10GbE environment before a data center migration. We checked port recognition, DOM/DDM visibility, link negotiation, optical power reporting, and sustained traffic under load. The 1510nm CWDM optical transceiver maintained a stable connection over a 10km-class single-mode fiber route, and the LC duplex interface integrated cleanly with our existing structured cabling. The 0–70°C commercial specification makes it suitable for conditioned server rooms, telecom closets, and standard indoor cabinets. For teams building a cost-conscious 10G CWDM transport layer, this module has been a reliable part of our bill of materials.
Please write comments with more than three
character.
494849
436314
I***s
Indonesia
Verified
Purchase
5 .0
2025-11-25
We deployed the LS-CW5110-10C as part of a 10G CWDM ring supporting four campus buildings. The 1510nm wavelength was connected through a passive CWDM MUX/DEMUX, while the path included multiple LC/UPC patch panels and approximately 8.9km of single-mode fiber. Initial DOM readings were within expected operating margins, with received optical power comfortably above the module’s sensitivity threshold. After several weeks of production traffic—including backups, voice services, and virtualization replication—we saw no interface flaps, CRC errors, or abnormal temperature behavior.
Please write comments with more than three
character.
494849
436297
K***n
Belgium
Verified
Purchase
5 .0
2025-09-06
We used this 10G SFP+ CWDM 1510nm transceiver for a cellular backhaul aggregation project in equipment rooms rather than exposed outdoor cabinets. The route was a little over 9km end to end, with several passive optical connections in the path. We monitored the DOM data before and after cleaning connectors, which made it easy to confirm that insertion loss stayed under control. The reported RX power remained stable during peak traffic periods, and the module did not run unusually warm in a populated 10G switch. It is a straightforward choice for commercial indoor backhaul, enterprise distribution, and CWDM expansion projects.
Please write comments with more than three
character.
494849
436315
D***s
Thailand
Verified
Purchase
5 .0
2025-08-29
We selected the LS-CW5110-10C 10G CWDM module for a shared-fiber office park installation. It fit our 1510nm CWDM design, worked over standard single-mode fiber, and avoided the cost of installing additional fiber infrastructure. Very practical solution.
Please write comments with more than three
character.
494849
436309
C***s
Republic of Korea
Verified
Purchase
5 .0
2025-07-22
We tested this 10G CWDM optical module across several switch ports in our lab before rolling it out. It was recognized normally and the diagnostic information was available through the device interface. Nice to have DOM when troubleshooting fiber cleanliness or attenuation.
Please write comments with more than three
character.
494849
436306
F***l
Philippines
Verified
Purchase
4 .0
2025-06-21
Solid 10G CWDM 1510nm performance for the price. Delivery took a couple of extra days due to the carrier handoff, not the product, and the module arrived working perfectly. We would order again for routine commercial installs.
Please write comments with more than three
character.
494849
436301
A***y
Australia
Verified
Purchase
5 .0
2025-03-03
We used this 1510nm 10G CWDM SFP+ module to connect two office buildings on existing single-mode fiber. The route is just under 6km and the link has been stable from day one. DOM is especially useful for checking optical power during routine maintenance.
Please write comments with more than three
character.
494849
436303
W***y
India
Verified
Purchase
5 .0
2025-01-18
Installed several LS-CW5110-10C 10G SFP+ modules in a small data center CWDM setup. Each module locked at 10Gbps and the duplex LC ports were easy to patch into our existing panels. Good option when you need to add capacity without installing more fiber.
Please write comments with more than three
character.
494849
436290
M***k
Turkey
Verified
Purchase
5 .0
2024-03-26
This 100G QSFP28 Transceiver Module was purchased under the recommendation of a friend, and it has been running very well so far. Looking forward to future cooperation.
United Kingdom · English · GBP
