ผลิตภัณฑ์ทั้งหมด
เลนส์ที่เข้ากันได้
บริการของเรา
Support
เกี่ยวกับเรา
แหล่งข้อมูล
โมดูลออปติคอลที่กำหนดรหัส OEM สำหรับแพลตฟอร์มหลักๆ
หน้าอัลบั้มที่คัดสรรมาอย่างดีสำหรับกรงและอุปกรณ์เลนส์ทองแดง
ใส่ใจธุรกิจของคุณด้วยตัวเลือกการชำระเงินที่เชื่อถือได้หลากหลาย
ใช้หมายเลขคำสั่งซื้อหรือหมายเลขติดตามเพื่อตรวจสอบสถานะการจัดส่ง
รับใบเสนอราคาอย่างรวดเร็วและเสนอบริการระดับมืออาชีพมากขึ้น
ช่วยจัดการงบประมาณและรายจ่ายของคุณได้ดีขึ้น
รองรับตัวอย่างฟรีช่วยให้คุณบรรลุผลการทดสอบอย่างมีประสิทธิภาพ
ทีมงานมืออาชีพให้การสนับสนุนและบริการเพื่อแก้ไขปัญหาของคุณทันเวลา
ถามอะไรก็ได้ที่คุณอยากรู้ เราพร้อมช่วยเหลือคุณตลอด 24 ชั่วโมง 7 วันต่อสัปดาห์
รับใบเสนอราคาอย่างรวดเร็วและเสนอบริการระดับมืออาชีพมากขึ้น
พบกับเราและเรียนรู้ภารกิจ ความเชื่อ การบริการ และอื่นๆ ของเรา
ค้นหาสถานที่ตั้งของเราและเชื่อมต่อกับเราอย่างใกล้ชิด
การจัดการคุณภาพ การทดสอบ ความเข้ากันได้ และการปฏิบัติตามมาตรฐานสากล
ค้นหาข่าวสารและกิจกรรมล่าสุดรอบๆ l-p.com
เจาะลึกรายละเอียดเกี่ยวกับคู่มือทางเทคนิค มาตรฐานอุตสาหกรรม และข้อมูลเชิงลึกเกี่ยวกับความเข้ากันได้ของ SFP
ข้อมูลเปรียบเทียบประสิทธิภาพผลิตภัณฑ์โดยละเอียดและแบบเคียงข้างกัน เพื่อช่วยให้คุณเลือกโมดูลที่เหมาะสม
สำรวจโซลูชันการเชื่อมต่อในโลกแห่งความเป็นจริงสำหรับศูนย์ข้อมูล องค์กร และเครือข่ายโทรคมนาคม
คำแนะนำที่สำคัญในการเลือกอัตราการส่งข้อมูล ระยะการส่งข้อมูล และประเภทของตัวเชื่อมต่อ
หากต้องการปริมาณมากกว่านี้ หรือต้องการต่อรองราคา โปรดติดต่อเรา
SFP-10GDWER-46-I supports data rates up to 10.7Gbps as a C46 10GBASE-DWDM SFP+ transceiver operating at 1540.55nm, using a cooled EML laser and PIN photodiode for up to 40km transmission over single-mode fiber. It provides real-time digital diagnostic monitoring and operates within a temperature range of -40°C to +85°C.
| หมายเลขชิ้นส่วน MRV | เอสเอฟพี-10จีดีเวอร์-46-ไอ | ชื่อผู้ขาย | LINK-PP |
| ฟอร์มแฟกเตอร์ | SFP + | อัตราข้อมูลสูงสุด | 10.7Gbps |
| ความยาวคลื่น | 1540.55nm | ระยะทางสายเคเบิลสูงสุด | 40km |
| เชื่อมต่อ | LC แบบดูเพล็กซ์ | ภาพบรรยากาศ | SMF |
| ประเภทเครื่องส่งสัญญาณ | EML | ประเภทตัวรับ | PIN |
| TX Power | -1 ถึง + 2dBm | อาร์เอ็กซ์ พาวเวอร์ | -16 ถึง -1dBm |
| เครื่องรับความไวแสง | <-15.5dBm | ดีดีเอ็ม/ดีโอเอ็ม | ที่สนับสนุน |
| ช่วงอุณหภูมิ | -40 ถึง + 85 ° C | โปรโตคอล | SFP+ MSA, SFF-8431, SFF 8472, 10GBASE-ER/EW, SDH STM64 |
MRV SFP-10GDWER-46-I เข้ากันได้ LINK-PP SFP+ transceiver delivers 10G optical connectivity with DWDM technology for efficient fiber utilization and supports transmission distances up to 40km. It features a hot-pluggable SFP+ form factor, a duplex LC interface, and digital diagnostic monitoring for easier installation and link management.
The hot-pluggable SFP+ form factor allows the optical module to be installed or replaced without powering down the host device. Compliance with the SFP MSA helps ensure standardized electrical and mechanical interfaces for compatible networking equipment.
With data rates up to 10.7Gbps, this industrial SFP+ DWDM module supports fast data transfer between remote industrial sites. It helps maintain 10G connectivity for industrial control systems, monitoring equipment, and distributed operations.
DWDM technology allows multiple optical signals to travel through the same fiber pair using different wavelengths. This 10G DWDM SFP+ module helps increase fiber capacity without requiring additional fiber cables.
The DWDM transceiver operates at a fixed wavelength of 1540.55nm, corresponding to ITU-T channel C46. Its 100GHz channel spacing allows integration with DWDM Mux/Demux systems that support the same channel plan.
A cooled EML laser and PIN photodiode enable optical transmission up to 40km over single-mode fiber (SMF). This makes the module suitable for connecting geographically separated facilities through long-distance fiber links.
The duplex LC interface uses separate fiber strands for transmitting and receiving optical signals. Its standard LC connectors allow easy connection to compatible single-mode fiber patch cables and fiber distribution panels.
Built-in Digital Diagnostic Monitoring (DDM) provides real-time readings of optical power, operating temperature, supply voltage, and laser bias current. Network administrators can use this diagnostic data to check module status and troubleshoot potential link issues.
ผ่านการทดสอบความเข้ากันได้แล้ว LINK-PP ห้องปฏิบัติการ ดูรายงานผลการทดสอบ
MRV SFP-10GDWER-46-I เข้ากันได้ LINK-PP DWDM SFP+ module undergoes strict quality testing and follows recognized standards such as ISO 9001, CE, RoHS, and FCC to support consistent product quality, regulatory compliance, and reliable network connectivity.
Each 10G DWDM transceiver undergoes detailed optical, electrical, and temperature testing to verify stable operation and reliable data transmission under different working conditions.
Recognized quality and safety certifications demonstrate that the optical module meets relevant industry requirements for product safety, environmental protection, and manufacturing quality.
This SFP+ DWDM transceiver is tested with compatible switches and networking equipment to help ensure proper device recognition, stable communication, and smooth integration into existing networks.
MRV SFP-10GDWER-46-I เข้ากันได้ LINK-PP SFP+ transceiver undergoes rigorous optical, signal quality, bit error rate, and temperature testing to ensure stable 10G DWDM transmission under various operating conditions. Learn more about our testing procedures and quality standards at the LINK-PP ศูนย์สนับสนุนการทดสอบ
Verify C46 wavelength accuracy and spectral stability at 1540.55nm.
Evaluate optical signal quality and timing for stable 10G transmission.
Measure transmission errors to verify reliable 10G data communication.
Validate module operation across the -40°C to +85°C temperature range.
LINK-PP provides secure packaging and efficient shipping services to protect the SFP-10GDWER-46-I 10G DWDM SFP+ module during transportation. With careful order handling and global logistics support, we help ensure safe and timely delivery to customers worldwide.
Protect optical modules from electrostatic discharge during handling and shipping.
Minimize vibration and impact damage during long-distance transportation and delivery.
Process customer orders promptly to support efficient packing and dispatch.
Arrange worldwide shipping to ensure safe and timely product delivery.
Begin by inserting the SFP-10GDWER-46-I 10G DWDM transceiver into a compatible SFP+ port and ensuring it is securely seated. Next, connect the Duplex LC single-mode fiber cables, verify correct TX/RX alignment, and ensure the module's C46 wavelength matches the corresponding channel on the DWDM Mux/Demux before checking the link status.
LINK-PP ให้บริการสนับสนุนทางเทคนิคแบบครบวงจร ตั้งแต่การให้คำปรึกษาก่อนการขายไปจนถึงความช่วยเหลือหลังการติดตั้ง เพื่อให้มั่นใจได้ถึงการผสานรวมที่ราบรื่นและประสิทธิภาพของเครือข่ายที่เชื่อถือได้
คำแนะนำจากผู้เชี่ยวชาญเพื่อช่วยคุณเลือกโมดูล SFP-10GDWER-46-I ที่เหมาะสมที่สุดสำหรับการออกแบบเครือข่ายและความต้องการใช้งานของคุณ
ความเข้ากันได้ที่ผ่านการตรวจสอบแล้วกับ LINK-PP สวิตช์และแพลตฟอร์มเครือข่ายหลักอื่นๆ เพื่อการติดตั้งใช้งานที่ราบรื่น
คู่มือแนะนำทีละขั้นตอนอย่างละเอียดสำหรับการติดตั้ง การกำหนดค่า และการตั้งค่าเริ่มต้น เพื่อให้มั่นใจได้ว่าการใช้งานถูกต้องแม่นยำ และมีเสถียรภาพตั้งแต่เริ่มต้น
การสนับสนุนทางเทคนิคอย่างต่อเนื่องตลอดอายุการใช้งานของผลิตภัณฑ์ เพื่อสร้างเสถียรภาพในระยะยาวสำหรับเครือข่ายระดับองค์กรและระดับผู้ให้บริการ
LINK-PP ให้บริการบริการหลังการขายเพื่อให้การติดตั้งและการใช้งานโมดูลออปติคอลเป็นไปอย่างราบรื่นและเชื่อถือได้
รับประกันคืนสินค้าและคืนเงินภายใน 15 วันโดยไม่ต้องระบุเหตุผล
เปลี่ยนสินค้าให้ฟรีหากสินค้าชำรุดเสียหายตั้งแต่แรกรับ (DOA) ภายในระยะเวลาเริ่มต้น
บริการซ่อมฟรีสำหรับข้อบกพร่องจากการผลิตตลอดระยะเวลาการรับประกัน
เงื่อนไขและข้อยกเว้นการรับประกันมีผลบังคับใช้
| ภาพ | ID # | รายละเอียด | ราคา | หุ้น | เพิ่มไปที่รถเข็น |
ยังไม่มีคำถามใดๆ
เป็นคนแรกที่สอบถามเกี่ยวกับข้อมูลจำเพาะ ความเข้ากันได้ หรือระยะเวลาในการจัดส่ง
ส่งคำถาม17 รีวิว
By
ประเทศไทย
พาหะ
ราคา·เวลาจัดส่งสินค้า·การติดตาม
เกี่ยวกับเรา
ราคา·เวลา
Free Shipping To Be Negotiated Available