ผลิตภัณฑ์ทั้งหมด
เลนส์ที่เข้ากันได้
บริการของเรา
Support
เกี่ยวกับเรา
แหล่งข้อมูล
โมดูลออปติคอลที่กำหนดรหัส OEM สำหรับแพลตฟอร์มหลักๆ
หน้าอัลบั้มที่คัดสรรมาอย่างดีสำหรับกรงและอุปกรณ์เลนส์ทองแดง
ใส่ใจธุรกิจของคุณด้วยตัวเลือกการชำระเงินที่เชื่อถือได้หลากหลาย
ใช้หมายเลขคำสั่งซื้อหรือหมายเลขติดตามเพื่อตรวจสอบสถานะการจัดส่ง
รับใบเสนอราคาอย่างรวดเร็วและเสนอบริการระดับมืออาชีพมากขึ้น
ช่วยจัดการงบประมาณและรายจ่ายของคุณได้ดีขึ้น
รองรับตัวอย่างฟรีช่วยให้คุณบรรลุผลการทดสอบอย่างมีประสิทธิภาพ
ทีมงานมืออาชีพให้การสนับสนุนและบริการเพื่อแก้ไขปัญหาของคุณทันเวลา
ถามอะไรก็ได้ที่คุณอยากรู้ เราพร้อมช่วยเหลือคุณตลอด 24 ชั่วโมง 7 วันต่อสัปดาห์
รับใบเสนอราคาอย่างรวดเร็วและเสนอบริการระดับมืออาชีพมากขึ้น
พบกับเราและเรียนรู้ภารกิจ ความเชื่อ การบริการ และอื่นๆ ของเรา
ค้นหาสถานที่ตั้งของเราและเชื่อมต่อกับเราอย่างใกล้ชิด
การจัดการคุณภาพ การทดสอบ ความเข้ากันได้ และการปฏิบัติตามมาตรฐานสากล
ค้นหาข่าวสารและกิจกรรมล่าสุดรอบๆ l-p.com
เจาะลึกรายละเอียดเกี่ยวกับคู่มือทางเทคนิค มาตรฐานอุตสาหกรรม และข้อมูลเชิงลึกเกี่ยวกับความเข้ากันได้ของ SFP
ข้อมูลเปรียบเทียบประสิทธิภาพผลิตภัณฑ์โดยละเอียดและแบบเคียงข้างกัน เพื่อช่วยให้คุณเลือกโมดูลที่เหมาะสม
สำรวจโซลูชันการเชื่อมต่อในโลกแห่งความเป็นจริงสำหรับศูนย์ข้อมูล องค์กร และเครือข่ายโทรคมนาคม
คำแนะนำที่สำคัญในการเลือกอัตราการส่งข้อมูล ระยะการส่งข้อมูล และประเภทของตัวเชื่อมต่อ
หากต้องการปริมาณมากกว่านี้ หรือต้องการต่อรองราคา โปรดติดต่อเรา
LS-DW4410-40I is built as an industrial-grade 10GBASE-DWDM SFP+ module for channel C44 at 1542.14nm, delivering data rates up to 10.7Gbps through a cooled EML laser and PIN photodiode configuration designed for 40km SMF transmission. Also, the module supports real-time digital optical monitoring and can operate stably across a temperature range of -40°C to +85°C.
| LINK-PP ส่วนจำนวน | LS-DW4410-40I | ชื่อผู้ขาย | LINK-PP |
| ฟอร์มแฟกเตอร์ | SFP + | อัตราข้อมูลสูงสุด | 10.7Gbps |
| ความยาวคลื่น | 1542.14nm | ระยะทางสายเคเบิลสูงสุด | 40km |
| เชื่อมต่อ | LC แบบดูเพล็กซ์ | ภาพบรรยากาศ | SMF |
| ประเภทเครื่องส่งสัญญาณ | EML | ประเภทตัวรับ | PIN |
| TX Power | -1 ถึง + 2dBm | อาร์เอ็กซ์ พาวเวอร์ | -16 ถึง -1dBm |
| เครื่องรับความไวแสง | <-15.5dBm | ดีดีเอ็ม/ดีโอเอ็ม | ที่สนับสนุน |
| ช่วงอุณหภูมิ | -40 ถึง + 85 ° C | โปรโตคอล | SFP+ MSA, SFF-8431, SFF 8472, 10GBASE-ER/EW, SDH STM64 |
LINK-PP LS-DW4410-40I delivers 10G optical connectivity on the 1542.14nm C44 channel, supporting transmission distances up to 40km over single-mode fiber. Designed for 100GHz DWDM systems, the transceiver features a hot-pluggable SFP+ design, duplex LC fiber connections, and built-in digital diagnostic monitoring.
The hot-pluggable SFP+ form factor allows this optical transceiver to be installed or replaced in supported network equipment without shutting down the system. Built to SFP+ MSA specifications, it uses a single +3.3V power supply and operates within an industrial case temperature range of -40°C to +85°C.
With a maximum data rate of 10.7Gbps, this DWDM SFP+ module supports the transfer of large amounts of network traffic between distributed telecom facilities. The available 10G bandwidth helps connect separate communication sites through compatible optical transport equipment.
A 100GHz DWDM channel grid allows separate optical wavelengths to carry different data streams through shared fiber infrastructure. When connected to compatible multiplexing and demultiplexing equipment, this SFP+ DWDM transceiver helps increase fiber capacity without requiring a dedicated fiber pair for every channel.
The C44 channel corresponds to a fixed center wavelength of 1542.14nm on the standard ITU-T frequency grid. This wavelength must align with the assigned optical filter channel to ensure proper signal routing through the wavelength-selective equipment.
Using a cooled EML laser for optical transmission and a PIN photodiode for signal reception, the module supports fiber connections extending up to 40km over SMF. Its actual operating reach depends on the available optical power budget and the combined attenuation of the transmission path.
A duplex LC optical interface uses two separate fiber connections, with one carrying transmitted signals and the other receiving incoming data. The connector arrangement supports full-duplex communication through standard LC single-mode fiber patch cables.
Real-time Digital Optical Monitoring (DOM) provides access to operating measurements such as module temperature, supply voltage, laser bias current, and Tx/Rx optical power. These values can be read through compatible host equipment to help detect unusual operating conditions and support routine network maintenance.
LINK-PP LS-DW4410-40I 10G SFP+ DWDM transceiver is manufactured under established quality control procedures, with an ISO 9001 quality management system and applicable CE, RoHS, and FCC compliance requirements supporting consistent product quality and manufacturing standards.
Each 10G DWDM optical transceiver goes through optical performance checks, electrical interface testing, data transmission verification, and temperature testing to confirm that it meets the specified operating requirements before shipment.
Quality certification procedures and compliance checks help ensure that the optical transceiver module follows relevant industry standards and meets applicable product quality requirements.
The module is tested with compatible host equipment to check module recognition, interface communication, and operating stability for proper integration into supported network devices.
We perform optical spectrum, eye pattern, bit error rate, and temperature tests on the LS-DW4410-40I DWDM transceiver to verify its C44 optical characteristics, 10G signal integrity, and operation under industrial temperature conditions. Learn more about our testing procedures and quality assurance practices at the LINK-PP ศูนย์สนับสนุนการทดสอบ
Examine spectral measurements to confirm correct C44 wavelength channel alignment.
Analyze eye diagram patterns to assess transmitted 10G signal quality.
Record transmission error rates to evaluate accuracy during continuous operation.
Check operational stability across the specified industrial operating temperature range.
LINK-PP packages the LS-DW4410-40I 10G DWDM SFP+ transceiver with suitable protective measures to help prevent damage during storage, handling, and transportation. From order confirmation to final delivery, we focus on careful shipment preparation, efficient dispatch, and convenient international shipping services.
Apply anti-static protection to prevent electrostatic damage during product handling.
Reduce potential damage caused by sudden impacts during product transportation.
Prepare customer orders promptly and arrange dispatch for timely shipment.
Offer international delivery services to support customers across different countries.
Insert the LS-DW4410-40I 10G DWDM module into a supported SFP+ slot and connect its transmit and receive fibers to the assigned C44 wavelength paths through compatible DWDM equipment. Confirm proper fiber polarity and check the connection status for communication between distributed telecom facilities.
LINK-PP ให้บริการสนับสนุนทางเทคนิคแบบครบวงจร ตั้งแต่การให้คำปรึกษาก่อนการขายไปจนถึงความช่วยเหลือหลังการติดตั้ง เพื่อให้มั่นใจได้ถึงการผสานรวมที่ราบรื่นและประสิทธิภาพของเครือข่ายที่เชื่อถือได้
คำแนะนำจากผู้เชี่ยวชาญเพื่อช่วยคุณเลือกโมดูล LS-DW4410-40I ที่เหมาะสมที่สุดสำหรับการออกแบบเครือข่ายและความต้องการใช้งานของคุณ
ความเข้ากันได้ที่ผ่านการตรวจสอบแล้วกับ LINK-PP สวิตช์และแพลตฟอร์มเครือข่ายหลักอื่นๆ เพื่อการติดตั้งใช้งานที่ราบรื่น
คู่มือแนะนำทีละขั้นตอนอย่างละเอียดสำหรับการติดตั้ง การกำหนดค่า และการตั้งค่าเริ่มต้น เพื่อให้มั่นใจได้ว่าการใช้งานถูกต้องแม่นยำ และมีเสถียรภาพตั้งแต่เริ่มต้น
การสนับสนุนทางเทคนิคอย่างต่อเนื่องตลอดอายุการใช้งานของผลิตภัณฑ์ เพื่อสร้างเสถียรภาพในระยะยาวสำหรับเครือข่ายระดับองค์กรและระดับผู้ให้บริการ
LINK-PP ให้บริการบริการหลังการขายเพื่อให้การติดตั้งและการใช้งานโมดูลออปติคอลเป็นไปอย่างราบรื่นและเชื่อถือได้
รับประกันคืนสินค้าและคืนเงินภายใน 15 วันโดยไม่ต้องระบุเหตุผล
เปลี่ยนสินค้าให้ฟรีหากสินค้าชำรุดเสียหายตั้งแต่แรกรับ (DOA) ภายในระยะเวลาเริ่มต้น
บริการซ่อมฟรีสำหรับข้อบกพร่องจากการผลิตตลอดระยะเวลาการรับประกัน
เงื่อนไขและข้อยกเว้นการรับประกันมีผลบังคับใช้
![]() LS-CW4510-20I
| ![]() LS-DW4410-A0C
| ![]() LS-CW4310-20I
| ![]() LS-CW4110-20I
| ![]() LS-CW3910-20I
|
|---|
เข้ากันได้ | LINK-PP | LINK-PP | LINK-PP | LINK-PP | LINK-PP | LINK-PP |
อัตราข้อมูล (สูงสุด) | 10.7Gbps | 10.7 Gbps | 10.7Gbps | 10.7 Gbps | 10.7 Gbps | 10.7 Gbps |
ความยาวคลื่น | 1542.14nm | 1450nm | 1542.14nm | 1430nm | 1410nm | 1390nm |
เชื่อมต่อ | LC แบบดูเพล็กซ์ | LC แบบดูเพล็กซ์ | LC แบบดูเพล็กซ์ | LC แบบดูเพล็กซ์ | LC แบบดูเพล็กซ์ | LC แบบดูเพล็กซ์ |
ระยะห่างของสายเคเบิล (สูงสุด) | 40km | 20km | 100km | 20km | 20km | 20km |
ประเภทสายเคเบิ้ล | SMF | SMF | SMF | SMF | SMF | SMF |
TX Power | -1 ถึง + 2dBm | -5 ถึง + 2dBm | -1 ถึง + 5dBm | -5 ถึง + 2dBm | -5 ถึง + 2dBm | -5 ถึง + 2dBm |
เครื่องรับความไวแสง | -16 ถึง -1dBm | -16 ถึง -1dBm | -23dBm | -16 ถึง -1dBm | -16 ถึง -1dBm | -16 ถึง -1dBm |
อุณหภูมิในการทำงาน | -40 ถึง + 85 ° C | -40 ถึง 85 ° C | 0 ถึง 70 ° C | -40 ถึง 85 ° C | -40 ถึง 85 ° C | -40 ถึง 85 ° C |
อุณหภูมิ | ด้านอุตสาหกรรม | ด้านอุตสาหกรรม | เชิงพาณิชย์ | ด้านอุตสาหกรรม | ด้านอุตสาหกรรม | ด้านอุตสาหกรรม |
ฟอร์มแฟกเตอร์ | SFP + | SFP + | SFP + | SFP + | SFP + | SFP + |
ประเภทเครื่องส่งสัญญาณ | EML | DFB | EML | DFB | DFB | DFB |
ประเภทตัวรับ | PIN | PIN | APD | PIN | PIN | PIN |
ดีดีเอ็ม/ดีโอเอ็ม | ที่สนับสนุน | ที่สนับสนุน | ที่สนับสนุน | ที่สนับสนุน | ที่สนับสนุน | ที่สนับสนุน |
โปรโตคอล | SFP+ MSA, SFF-8431, SFF 8472, 10GBASE-ER/EW, SDH STM64 | รองรับ SFP+ MSA, CPRI, eCPRI, ITU-T G.652 | สอดคล้องกับ SFP+ MSA | รองรับ SFP+ MSA, CPRI, eCPRI, ITU-T G.652 | รองรับ SFP+ MSA, CPRI, eCPRI, ITU-T G.652 | รองรับ SFP+ MSA, CPRI, eCPRI, ITU-T G.652 |
| ภาพ | ID # | รายละเอียด | ราคา | หุ้น | เพิ่มไปที่รถเข็น |
ยังไม่มีคำถามใดๆ
เป็นคนแรกที่สอบถามเกี่ยวกับข้อมูลจำเพาะ ความเข้ากันได้ หรือระยะเวลาในการจัดส่ง
ส่งคำถาม19 รีวิว
By
ประเทศไทย
พาหะ
ราคา·เวลาจัดส่งสินค้า·การติดตาม
เกี่ยวกับเรา
ราคา·เวลา
Free Shipping To Be Negotiated Available