10G-SFPP-ZRD-1542.14-I is a 10GBASE-DWDM SFP+ transceiver engineered for ITU-T Channel C44 (1542.14nm) grid links, delivering data rates up to 10.7Gbps. It pairs a cooled EML transmitter with an APD photodiode to enable single-mode fiber links of up to 80km, while integrating real-time digital optical monitoring (DOM) for operation across an industrial temperature range of -40°C to +85°C.
เข้ากันได้กับ Brocade 10G-SFPP-ZRD-1542.14-I LINK-PP delivers consistent 10 Gbps Ethernet connectivity across long-distance 80km optical runs. Built on the 1542.14nm DWDM channel, it pairs standard duplex LC connectivity with built-in digital diagnostics to help operators manage high-density fiber networks efficiently.
The module features a hot-pluggable SFP+ footprint that enables quick field installations without powering down the host networking device. Fully compliant with the standard SFP+ MSA, it draws electricity from a single +3.3V power supply for simple integration into standard switch ports.
10G-SFPP-ZRD-1542.14-I: 10 Gbps Connectivity for Metro Edge Aggregation
Data throughput reaches a sustained 10Gbps line rate to alleviate bandwidth bottlenecks across high-demand aggregation switches and routers. This robust bandwidth profile delivers consistent, low-latency traffic handling tailored for metropolitan ring nodes and carrier-grade distribution hubs.
Channel C44 operates precisely at the fixed optical center wavelength of 1542.14nm in adherence to the ITU-T spectral grid. A precision-stabilized cooled laser preserves tight spectral grid alignment to mitigate adjacent channel crosstalk across dense optical multiplexers.
Long-haul physical link budgets are maintained up to 80km across standard single-mode fiber spans. High-sensitivity receiver optoelectronics ensure minimal bit-error rates over extended reaches without requiring immediate intermediate in-line optical amplifiers.
An industry-standard duplex LC optical receptacle provides a compact, secure latching mechanism for point-to-point fiber patch cabling. The optical mating design minimizes insertion loss and maximizes back-reflection immunity across both transmit and receive fiber channels.
โมดูล 10G-SFPP-ZRD-1542.14-I พร้อม DOM สำหรับการตรวจสอบแบบเรียลไทม์
Digital Optical Monitoring (DOM) provides internal diagnostic access via the two-wire I²C management interface defined by SFF-8472. Network technicians can continuously track critical operating parameters such as optical Tx/Rx power, laser bias current, supply voltage, and internal operating temperature.
เข้ากันได้กับ Brocade 10G-SFPP-ZRD-1542.14-I LINK-PP 10G DWDM transceiver is built under recognized global manufacturing and safety standards, holding official certifications including ISO 9001, CE, RoHS, and FCC.
This DWDM SFP+ module completes a step-by-step manufacturing inspection that validates wavelength stability, signal clarity, and continuous communication without data drops.
ใบรับรองคุณภาพ 10G-SFPP-ZRD-1542.14-I
These formal compliance approvals confirm that the DWDM transceiver module meets mandatory electromagnetic safety, material safety, and product build rules.
Comprehensive port testing verifies that the transceiver links up properly and communicates smoothly across standard switches, routers, and network servers.
Every 10G-SFPP-ZRD-1542.14-I 10G SFP+ DWDM transceiver undergoes comprehensive manufacturing checks to verify signal precision and long-term operating stability. Learn more about our testing standards and verification procedures at the LINK-PP ศูนย์สนับสนุนการทดสอบ
การทดสอบสเปกตรัมแสง
Check central wavelength precision and optical signal frequency alignment.
การทดสอบรูปแบบตา
Evaluate optical waveform clarity and jitter parameters across transmissions.
การทดสอบอัตราข้อผิดพลาดบิต
Confirm error-free data packet transfer across full-length fiber spans.
ทดสอบอุณหภูมิ
Assess thermal stability and operational limits under extreme temperatures.
Every 10G-SFPP-ZRD-1542.14-I DWDM SFP+ transceiver is packed with dedicated protective materials to ensure secure handling throughout transit. Our streamlined logistics network provides prompt order dispatch and reliable global delivery directly to your facility.
บรรจุภัณฑ์ป้องกันไฟฟ้าสถิต
Prevent electrostatic discharge damage using specialized protective enclosure bags.
Insert the 10G-SFPP-ZRD-1542.14-I 10G DWDM transceiver into the switch SFP+ slot and connect duplex LC fibers to your DWDM multiplexer. It easily connects access switches to metro edge aggregation hubs, allowing network operators to combine multiple 10Gbps traffic channels over a single fiber pair.
Check the module’s receive power reading using DDM/DOM. The reading must remain between the specified receiver sensitivity of −23 dBm and the maximum receive power of −6 dBm. For future loss, compare the current receive power with the −23 dBm sensitivity and reserve additional engineering margin; do not rely on the full difference alone as usable margin. by LINK-PP Technical Support
Yes. The APD receiver offers high sensitivity for weaker optical signals. However, fiber and splice losses must still remain within the module's supported optical power budget. by LINK-PP Technical Support
The module uses a cooled EML transmitter designed for stable wavelength operation. Its industrial temperature rating supports use in changing environments, provided the operating conditions remain within the specified limits. by LINK-PP Technical Support
Yes. A compatible DWDM multiplexer can combine the C44 signal with other wavelengths on the same fiber infrastructure. Make sure C44 is available, and the total optical loss remains within the supported power budget. by LINK-PP Technical Support
No. The 80km rating does not guarantee operation without dispersion compensation on every fiber route. Whether compensation is needed depends on the fiber type, link length, and whether the accumulated chromatic dispersion stays within the transceiver’s specified tolerance. by LINK-PP Technical Support
Good specifications for a 10G fiber connection between two remote power substations. The APD receiver and -23dBm sensitivity are useful when evaluating longer fiber paths.
We needed an 80km SFP+ DWDM optic for a local government network project. The long-reach design and optical power specifications were exactly what our engineering team wanted to review.
We are reviewing optics for a new metro edge aggregation cabinet. The LS-DW4410-80I offers a fixed C44 channel at 1542.14nm, which simplifies our wavelength records. The industrial temperature range is especially relevant because the cabinet is installed in an area without climate control :)
We have several long fiber routes passing through patch panels and passive DWDM equipment. The LS-DW4410-80I has a specified transmit range of -1 to +5dBm and receiver range of -23 to -6dBm. Those values are helpful when estimating losses and deciding where additional optical testing is needed.
Thailand · Thai · THB
