DW-SFP10G80-41-I is an industrial-grade 10GBASE-DWDM SFP+ transceiver operating at the ITU-T C41 channel (1544.52nm) and supporting data rates up to 10.7Gbps. Integrating a cooled EML laser transmitter with a high-sensitivity APD receiver, it reliably supports single-mode fiber (SMF) links up to 80km while providing real-time digital diagnostic monitoring (DDM) across an extended operating temperature range of -40°C to +85°C.
เข้ากันได้กับ Generic DW-SFP10G80-41-I LINK-PP module is an industrial-grade DWDM SFP+ transceiver built for point-to-point links up to 80km on single-mode fiber, delivering 10Gbps data transmission with ITU-T C-band spectral efficiency. Integrated digital diagnostic monitoring provides real-time tracking of operational link health.
The transceiver module incorporates a hot-pluggable SFP+ footprint fully compliant with MSA standards to ensure broad hardware interoperability, requiring only a single +3.3V power supply for daily operation. This plug-and-play design allows seamless module replacement without powering down host networking equipment.
DW-SFP10G80-41-I: 10 Gbps Connectivity for Industrial Metro Infrastructure
Built for demanding industrial environments, the module delivers consistent 10Gbps network bandwidth across regional metro rings and remote field stations. Stable optical performance guarantees dependable communication between edge switches and core infrastructure.
Utilizing 100GHz DWDM channels, the module maximizes data transmission over existing fiber infrastructure by sending multiple signals simultaneously. Network operators can easily scale bandwidth while saving on costly physical cabling upgrades.
This 10G DWDM transceiver transmits data on a fixed 1544.52nm channel to ensure stable optical communication across single-mode fiber links. Accurate wavelength control allows seamless integration into multi-channel DWDM networks without channel interference.
An integrated avalanche photodiode (APD) receiver matches the cooled transmitter to bridge insertion loss budgets across single-mode fiber spans stretching up to 80km. High receiver sensitivity eliminates the need for intermediate optical amplification in regional distribution loops.
The industry-standard duplex LC optical receptacle provides a low-insertion-loss mechanical termination compatible with standard patch cables and high-density distribution frames. Precision ferrule alignment ensures repeatable optical return loss during routine maintenance cycles.
เข้ากันได้กับ Generic DW-SFP10G80-41-I LINK-PP 10G SFP+ DWDM module complies with international quality and safety benchmarks, holding ISO 9001, CE, RoHS, and FCC certifications for dependable deployment in global networks.
Each DWDM SFP+ transceiver undergoes strict optical performance, temperature cycling, and signal integrity testing to guarantee reliable operation in harsh industrial environments.
ใบรับรองคุณภาพ DW-SFP10G80-41-I
This optical transceiver complies with demanding global quality, electrical safety, and environmental criteria to provide long-lasting stability in mission-critical deployments.
Each DW-SFP10G80-41-I 10G DWDM transceiver undergoes strict factory quality screening to ensure stable optical connectivity on dense fiber networks. Discover our full validation processes at the LINK-PP ศูนย์สนับสนุนการทดสอบ
การทดสอบสเปกตรัมแสง
Verify exact DWDM channel wavelength and eliminate adjacent channel crosstalk.
การทดสอบรูปแบบตา
Inspect optical waveform clarity to ensure clean digital signal transmission.
การทดสอบอัตราข้อผิดพลาดบิต
Confirm error-free data packet transfer across long-distance single-mode links.
ทดสอบอุณหภูมิ
Assess optical signal stability under harsh industrial hot and cold conditions.
Every DW-SFP10G80-41-I 10G DWDM SFP+ transceiver is carefully packed to ensure maximum hardware protection throughout the entire shipping process. Our dedicated fulfillment network provides rapid and dependable worldwide delivery to keep your deployment schedules on track.
บรรจุภัณฑ์ป้องกันไฟฟ้าสถิต
Shield sensitive optical components against electrostatic discharge during storage.
ระบบป้องกันการขนส่งที่ทนทานต่อแรงกระแทก
Safeguard optical transceivers against vibration during long-distance cargo transit.
ดำเนินการและจัดส่งคำสั่งซื้ออย่างรวดเร็ว
Accelerate order handling to ensure timely dispatch from our warehouse.
โลจิสติกส์ระดับโลกและการจัดส่งระหว่างประเทศ
Deliver optical modules securely to international destinations with trusted carriers.
Insert the DW-SFP10G80-41-I DWDM module into an SFP+ switch slot and connect duplex LC fiber to the matching DWDM mux port. Built for industrial metro infrastructure, this transceiver provides reliable 10Gbps connectivity across city traffic monitoring cabinets, electrical utility substations, and outdoor edge networks.
Yes, provided your 100GHz DWDM MUX/DEMUX includes matching C40, C41, and C42 channel ports. Connect each module to its corresponding port so the different wavelengths can share the same fiber. by LINK-PP Technical Support
Yes, provided both modules support the same 10G data rate and protocol and use the same C41 DWDM channel. Each module must also be compatible with its respective host device, and the received optical power must remain within both modules’ specified operating ranges. by LINK-PP Technical Support
Yes, if your switch supports DDM/DOM reporting. You can usually read the module temperature through the switch interface and compare it with the supported operating range. by LINK-PP Technical Support
Yes. Dust or dirt on the fiber connector can increase signal loss and cause unstable links. Always inspect and clean the LC connectors before installation, especially on long-distance DWDM connections. by LINK-PP Technical Support
Usually, yes. This optical module supports hot-plugging, so you can insert or remove it while the switch remains powered on. The affected fiber link will still be interrupted during replacement. by LINK-PP Technical Support
We needed a long-distance connection from a production facility to our central server room. The LS-DW4110-80I DWDM SFP+ transceiver supports the 10G speed we need, along with standard duplex LC cabling. Its C41 wavelength is especially useful because our DWDM channel plan was already established.
We wanted an industrial 10G SFP+ DWDM transceiver for a remote operations site. The EML laser and sensitive APD receiver made it a good candidate for our long fiber span.
Shipping took two extra days, which delayed our scheduled cabinet installation. The transceiver arrived safely, though, and the correct C41 DWDM model was inside. Better delivery tracking would make the ordering experience smoother.
Nice option for our industrial control network. The wide temperature rating suits our equipment cabinets, while the SFP+ form factor keeps everything compact.
Thailand · Thai · THB
