LS-DW3910-80I delivers robust 10GBASE-DWDM connectivity at 1546.12nm (Channel C39), supporting transmission speeds up to 10.7Gbps. Utilizing a cooled EML transmitter paired with an APD receiver, it bridges link distances of up to 80km over SMF and provides real-time digital diagnostic monitoring across an industrial-grade operating temperature of -40°C to +85°C.
LINK-PP ส่วนจำนวน
LS-DW3910-80I
ชื่อผู้ขาย
LINK-PP
ฟอร์มแฟกเตอร์
SFP +
อัตราข้อมูลสูงสุด
10.7Gbps
ความยาวคลื่น
1546.12nm
ระยะทางสายเคเบิลสูงสุด
80km
เชื่อมต่อ
LC แบบดูเพล็กซ์
ภาพบรรยากาศ
SMF
ประเภทเครื่องส่งสัญญาณ
EML
ประเภทตัวรับ
APD
TX Power
-1 ถึง + 5dBm
อาร์เอ็กซ์ พาวเวอร์
-23 ถึง -6dBm
เครื่องรับความไวแสง
-23dBm
ดีดีเอ็ม/ดีโอเอ็ม
ที่สนับสนุน
ช่วงอุณหภูมิ
-40 ถึง + 85 ° C
โปรโตคอล
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
คุณสมบัติหลักของ LINK-PP LS-DW3910-80I 10G SFP+
LINK-PP LS-DW3910-80I provides 10GBASE-DWDM transmission over single-mode fiber spans up to 80km on a 100GHz grid spacing. Built in a hot-pluggable form factor with a duplex LC interface, it operates across an industrial temperature range of -40°C to +85°C while supporting real-time digital diagnostic monitoring.
LINK-PP โมดูลออปติคอล LS-DW3910-80I 10G SFP+
This DWDM optical transceiver utilizes a hot-pluggable SFP+ footprint powered by a single +3.3V supply rail. Fully compliant with the SFP+ MSA, the form factor allows hot-swapping directly into operational host cages.
LS-DW3910-80I: 10 Gbps Connectivity for Edge Data Center Interconnects
Line-rate throughput scales up to 10.7Gbps to provide direct 10GBASE-DWDM transport between edge data center locations. This consistent line speed handles continuous data exchange between regional switching nodes.
Emission frequency aligns fixedly at the ITU Channel C39 optical wavelength of 1546.12nm. The cooled transmitter holds this exact optical channel steady to prevent crosstalk into neighboring grid bands.
Long-span optical reach extends up to 80km over standard single-mode fiber. An APD photodetector amplifies weakened inbound light to ensure clean signal reception over extended physical distances.
The duplex LC interface establishes optical connectivity across standard single-mode patch cables. Dedicated transmit and receive ports isolate bidirectional optical signals to minimize optical back-reflection.
Digital diagnostic monitoring reports key operational parameters through the module's 2-wire serial interface. System administrators can continuously read laser bias current, module temperature, supply voltage, and optical power.
LINK-PP LS-DW3910-80I การรับรอง 10G SFP+
LINK-PP LS-DW3910-80I DWDM SFP+ module meets global manufacturing, safety, and electromagnetic standards, backed by full ISO 9001, CE, RoHS, and FCC compliance.
Each 10G DWDM transceiver completes rigorous optical performance and bit error rate verification under extreme temperature cycling to ensure dependable field operation.
ใบรับรองคุณภาพ LS-DW3910-80I
Recognized international certifications ensure the optical transceiver meets strict requirements for manufacturing quality, electromagnetic safety, and environmental protection.
Verified EEPROM coding and broad host platform screening guarantee smooth hardware recognition and reliable link bring-up in mainstream optical switches and routers.
Every LS-DW3910-80I SFP+ DWDM transceiver undergoes comprehensive validation protocols to guarantee optical signal integrity and hardware stability under real-world operating conditions. For detailed testing procedures, visit the LINK-PP ศูนย์สนับสนุนการทดสอบ
การทดสอบสเปกตรัมแสง
Verify the channel central wavelength to prevent adjacent DWDM crosstalk.
การทดสอบรูปแบบตา
Analyze optical transmitter eye diagrams to confirm signal purity.
การทดสอบอัตราข้อผิดพลาดบิต
Evaluate receive sensitivity limits to ensure zero-loss packet transport.
ทดสอบอุณหภูมิ
Assess module performance under -40°C to +85°C operating conditions.
Every LS-DW3910-80I 10G DWDM SFP+ optical transceiver is secured in standardized protective packaging to prevent physical and electrostatic damage during handling. Our streamlined fulfillment system coordinates with major global freight carriers to ensure dependable, on-time worldwide delivery.
บรรจุภัณฑ์ป้องกันไฟฟ้าสถิต
Shield internal optical circuitry against electrostatic discharge during storage.
ระบบป้องกันการขนส่งที่ทนทานต่อแรงกระแทก
Protect delicate internal components from mechanical shock during transit.
Coordinate premier worldwide couriers to ensure reliable international transit.
LINK-PP การสาธิตการใช้งาน LS-DW3910-80I 10G SFP+
Align and slide the LS-DW3910-80I DWDM SFP+ module directly into the host port without powering down equipment, then mate clean LC optical connectors. Designed for edge data center interconnects, it establishes point-to-point 10G DWDM transport between localized edge computing nodes and central regional switching facilities over existing dark fiber.
Yes. The transceiver is hot-pluggable and can be installed or removed while a compatible router or switch is powered on. Other ports remain unaffected, but traffic on the specific port will stop during the change; ensure redundancy or use a maintenance window for critical links. by LINK-PP Technical Support
Yes. The module is industrial-grade and rated for -40°C to +85°C, suitable for outdoor LTE cabinets with large temperature swings. Keep the module’s case temperature within this range for reliable operation. by LINK-PP Technical Support
Yes. The module supports up to 80km over single-mode fiber, so a 75km link is within its rated reach. Ensure the total link loss, including connectors, splices, and any MUX insertion loss, remains within the module’s optical budget; verify the actual link loss before deployment. by LINK-PP Technical Support
Yes. The module operates on DWDM channel C39 at 1546.12nm, following the standard 100 GHz ITU-T G.694.1 grid. It can be added to a compatible 100GHz DWDM MUX/DEMUX when the C39 channel port is available. by LINK-PP Technical Support
Upgraded our cellular base station backhaul. This 10G DWDM module perfectly handles the intense heat in our unconditioned enclosures. Fast duplex LC SMF link. ;)
I run a regional ISP and securing reliable 1546.12nm wavelength optics is critical for our WDM ring. We stress-tested this LS-DW3910-80I over a week at max 10.7Gbps capacity. Zero CRC errors logged. The SFF-8431 hardware integrates beautifully with our mixed vendor core routers.
Deploying 10G network equipment in telecom huts is brutal on optics. This industrial SFP+ survives 70°C ambient peaks seamlessly. The 1546.12nm signal locked in instantly on our 100GHz grid. It is an incredibly robust solution for long-haul base station backhaul over dark fiber.
Thailand · Thai · THB
