What type of internal transmitter optical assembly is utilized in the AFCT-725SMZ module?

The module incorporates a highly reliable Distributed Feedback (DFB) laser architecture, which maintains spectral stability across long distances under varying thermal loads.

Is the optical port interface compatible with standard APC angled physical connectors?

No, the interface is explicitly designed for Duplex LC/UPC (Ultra Physical Contact) flat connectors. Forcing an APC-angled fiber plug into it will cause high insertion loss.

Does the AFCT-725SMZ use an NRZ or PAM4 modulation scheme for signaling?

This module utilizes standard non-return-to-zero (NRZ) modulation at a serial line rate of 25.78Gbps, ensuring low latency compared to PAM4 optics.

How does the 1.2W power envelope affect high-density Top-of-Rack (ToR) switch deployments?

Its ultra-lean 1.2W draw keeps the switch's overall thermal dissipation low, preventing port-throttling or cooling fans from ramping up to maximum velocity in fully populated 48-port switches.

Does the diagnostic engine comply with the SFF-8472 specification for real-time monitoring of supply voltage and laser bias?

Yes, the built-in DDM framework registers voltage, temperature, bias current, and optical power precisely according to SFF-8472 industry guidelines.

Can we hot-swap this module into a busy line card without disrupting neighboring 25G SFP28 links?

Yes, the module is fully engineered for hot-plugging, allowing clean physical installation without causing power spikes or interrupting adjacent data lanes.

Can this 1310nm single-mode transceiver connect to a 1550nm module on the opposite end of a dark fiber run?

No, both ends of the physical layer span must utilize matching 1310nm center wavelengths to successfully establish optical synchronization.

Does this 10km single-mode SFP module suffer from severe modal dispersion if routed through old legacy single-mode fiber runs?

No, because modal dispersion is primarily a characteristic of multimode infrastructure. When operating at a 1310nm wavelength over standard single-mode fiber, chromatic dispersion is minimal, though legacy fiber quality and patch panel degradation should still be verified to ensure proper attenuation margins.

Breadcrumb: Home; Products; Optics Transceivers | SFP Modules; 10/25/40G/100G Transceiver Modules; 25G SFP28; 219248

Click to open expanded view

AVAGO AFCT-725SMZ Compatible LINK-PP 25G SFP28 1310nm 10km Duplex LC/UPC DOM SMF Optical Transceiver Module

Name: AVAGO AFCT-725SMZ Compatible LINK-PP 25G SFP28 1310nm 10km Duplex LC/UPC DOM SMF Optical Transceiver Module
Brand: LINK-PP
SKU: 219248
Price: 29.67 USD
Availability: InStock
Rating: 5 (28 reviews)

# 219248

Product: AVAGO AFCT-725SMZ Compatible LINK-PP 25G SFP28 1310nm 10km Duplex LC/UPC DOM SMF Optical Transceiver Module
SKU: 219248
P/N: LS-SM3125-10C
Price: $ 34.5
Stock: 1306 in Stock
Sold: 813
Product URL: https://www.l-p.com/products/493949.htm

For Order Over $1000 Get $15.00 Off , Code: Linkpp15

For Order Over $3000 Get $50.00 Off , Code: Linkpp50

For Order Over $5000 Get $100.00 Off , Code: Linkpp100

New Users: $10 Coupon for Orders , Code: linkpp2610

28 Reviews

4 Questions

Request Stock

813 Sold

$ 34.5

Free shipping over $600, If you need a more favorable price, please contact us directly.

Qty (pcs) :

Unit Price :

$ 34.5

100

$ 32.775

1000

$ 31.74

3000

$ 30.705

6000

$ 29.67

Manufacture: LINK-PP

P/N: LS-SM3125-10C

Compatible:: Cisco; LINK-PP; AVAGO; Arista; Brocade; DELL; Edge-Core; Extreme; FS; H3C; HPE Aruba; HPE H3C; HW; Intel; Juniper; Mellanox; Ubiquiti

Compatible P/N:: AFCT-725SMZ | 10km

Shipping:

To Be Negotiated

Free Shipping

Can't deliver

to United States via {{now_chooseship?now_chooseship.name:''}}

Estimated delivery time : {{now_chooseship?now_chooseship.datemin:''}}-{{now_chooseship?now_chooseship.datemax:''}} days. See details

5-Year Warranty 30-Day Returns 30-Day Exchange

Stock:

{{parseInt(detail_data.left_num) ? detail_data.left_num +' in Stock' :detail_data.zeroStockOrder==0?'Out of Stock':'Available'}} .

Quantity:

( Min. Order {{detail_data.prodInfo.minimum_ordered_quantity}} )

undeliverable

Total Price:

{{ detail_data.displayed_price.unit_prefix }} {{ detail_data.displayed_price.original_total_price }} ( {{ detail_data.displayed_price.rate_of_discount }}% OFF ) {{detail_data.displayed_price.ex_sell_type}}

Add to wish

Specifications

Specification
Videos
Matching Products
Download
Q&A
Customer Reviews

AVAGO AFCT-725SMZ Compatible LINK-PP 25G SFP28 Specifications

AFCT-725SMZ is a 25G SFP28 single-mode optical transceiver module that engineered for precision data delivery, sustaining an ultra-lean maximum power consumption of 1.2W while driving 1310nm wavelengths across distances up to 10km with integrated DOM diagnostics.

AVAGO Part Number	AFCT-725SMZ	Vendor Name	LINK-PP
Form Factor	SFP28	Max Data Rate	25.78Gbps
Wavelength	1310nm	Max Cable Distance	10km
Connector	Duplex LC	Media	SMF
Transmitter Type	DFB	Receiver Type	PIN
Receiver Sensitivity	-13dBm	Receiver Overload	2dBm
TX Power	-8 to +3dBm	RX Power	-14 to +3dBm
DOM	Supported	Protocols	MSA Compliant, CPRI, eCPRI

Videos

Matching Products

Pictures

ID#

Description

Price

Stock

Add to Cart

Download

Product Drawing

PDF
LS-SM3125-10C.pdf

Questions & Answers
Ask a Question

No data

Q: Does the diagnostic engine comply with the SFF-8472 specification for real-time monitoring of supply voltage and laser bias? By O***n on 2026-04-28

A: Yes, the built-in DDM framework registers voltage, temperature, bias current, and optical power precisely according to SFF-8472 industry guidelines. By admin on 2026-04-29
Q: Can we hot-swap this module into a busy line card without disrupting neighboring 25G SFP28 links? By E***e on 2026-03-15

A: Yes, the module is fully engineered for hot-plugging, allowing clean physical installation without causing power spikes or interrupting adjacent data lanes. By admin on 2026-03-16
Q: Can this 1310nm single-mode transceiver connect to a 1550nm module on the opposite end of a dark fiber run? By C***e on 2025-11-10

A: No, both ends of the physical layer span must utilize matching 1310nm center wavelengths to successfully establish optical synchronization. By admin on 2025-11-11
Q: Does this 10km single-mode SFP module suffer from severe modal dispersion if routed through old legacy single-mode fiber runs? By L***t on 2025-10-18

A: No, because modal dispersion is primarily a characteristic of multimode infrastructure. When operating at a 1310nm wavelength over standard single-mode fiber, chromatic dispersion is minimal, though legacy fiber quality and patch panel degradation should still be verified to ensure proper attenuation margins. By admin on 2025-10-19

Customer Reviews
Write a Review

{{stardata.star}}

{{comment.count}} reviews
5 Stars

{{comment.star5}}%

4 Stars

{{comment.star4}}%

3 Stars

{{comment.star3}}%

2 Stars

{{comment.star2}}%

1 Star

{{comment.star1}}%

All Reviews ({{comment.star_num?comment.star_num:comment.count}})

All Reviews

5 stars only

4 stars only

3 stars only

2 stars only

1 star only
Reviews with Pictures ( {{comment.pic_comment}} )
See All Reviews

No data

Z***s

Malaysia

Verified Purchase

5 .0

2026-05-08

Robust physical assembly—the duplex LC/UPC connectors snap in snugly with absolute zero structural wobble.

34 Helpful vote Comments

B***n

Germany

Verified Purchase

5 .0

2026-04-02

Lock-step synchronization at 25.78Gbps directly inside our high-density top-of-rack leaf-spine layout.

27 Helpful vote Comments

Y***n

United Arab Emirates

Verified Purchase

5 .0

2026-03-18

Using these for an enterprise network infrastructure refresh. The duplex LC connectors are well-molded, and the extraction latches feel sturdy enough for repeated patching during maintenance windows. No packet drops detected over a 72-hour stress test.

102 Helpful vote Comments

D***t

India

Verified Purchase

5 .0

2026-03-10

These commercial-grade 25G SFP28 transceivers perform admirably under continuous workloads. They handle standard indoor data center environments perfectly. We'll be keeping a stock of these in our crash carts for emergency spares.

23 Helpful vote Comments

A***r

United Kingdom

Verified Purchase

5 .0

2026-02-08

Shipped quickly for our server room expansion. Deployed these 1310nm 25G SFP28 optics across our distribution tier to handle increased inter-vlan routing traffic. The DOM telemetry gives clean, accurate optical power values directly in our management console.

81 Helpful vote Comments

D***l

Australia

Verified Purchase

5 .0

2025-11-23

Negligible thermal signature inside the switch cage, staying well within commercial 0-70°C limits under load.

40 Helpful vote Comments

U***l

Canada

Verified Purchase

5 .0

2025-11-07

Upgraded our storage cluster uplinks from legacy 10G to 25G using these SFP28 SMF optics. The 1310nm center wavelength matches our existing patch panels perfectly. Immediate throughput improvement for our backup arrays.

30 Helpful vote Comments

C***d

Japan

Verified Purchase

5 .0

2025-08-14

Our 25G optical modules can sometimes be finicky with specific firmware versions, but these LINK-PP modules proved highly adaptable. They initialized instantly on our top-of-rack switches. Power consumption is quite low, which helps keep rack thermals down.

32 Helpful vote Comments

V***s

Brunei Darussalam

Verified Purchase

5 .0

2025-06-03

Solid performance on our 25GbE optical transceiver deployment. We tested these over an 8km single-mode run across our corporate facility, and the received power remained comfortably within the recommended safety margins. No CRC errors.

62 Helpful vote Comments

E***r

Brazil

Verified Purchase

5 .0

2025-05-27

Excellent Cost-to-Performance Ratio! In enterprise network environments, balancing budget with performance efficiency is always a challenge. These 25G optical transceivers offer the exact same physical and logical performance profiles as first-party alternatives. We run them across our centralized patch frames over single-mode fiber paths, and they maintain absolute link stability. The housing handles heat dissipation effectively, preventing localized hotspots on high-density 48-port blades.

142 Helpful vote Comments

A***d

France

Verified Purchase

4 .0

2025-04-28

Checked the SFF-8472 compliance and DOM functions; everything reports correctly in our switch OS. The transceivers are commercial-grade (0-70°C), so make sure your indoor cabinet has proper ventilation. Wish they offered a free patch cable in the bulk kits!

19 Helpful vote Comments

l***x

Japan

Verified Purchase

5 .0

2024-05-24

Went to this site for a computer hard drive. Quickly found exactly what I wanted and for a great price. Was done in minutes.

35 Helpful vote Comments

J***r

France

Verified Purchase

5 .0

2024-05-18

Quick and reliable service at a competitive price

58 Helpful vote Comments

A***s

Poland

Verified Purchase

5 .0

2024-04-01

LINK-PP is a company with excellent sales people. They are technically oriented and know their products well. I have used them several times. Right product, on time, every time!

89 Helpful vote Comments

C***o

Israel

Verified Purchase

5 .0

2024-02-22

Good quality for a small price. I know that i buy more from this product.

35 Helpful vote Comments

T***g

Russian Federation

Verified Purchase

5 .0

2024-01-04

Went smoothly. No problem, except the wrong tracking information.

15 Helpful vote Comments

W***g

Canada

Verified Purchase

5 .0

2023-11-27

Package arrived when promised and in excellent shape.

51 Helpful vote Comments

G***y

Republic of Korea

Verified Purchase

5 .0

2023-11-09

Excellent quality compatible 10/25/40G Transceiver Modules ethernet modules, speedily delivered. We always use this supplier.

29 Helpful vote Comments

N***v

Denmark

Verified Purchase

5 .0

2023-10-30

Tested on the following.

16 Helpful vote Comments

R***e

Poland

Verified Purchase

5 .0

2023-10-18

These modules are awesome. They work prefectly. They are recognized right away with the speeds advertised. LINK-PP support has been great with all of our questions and helping us find the right modules for our needs. We will be using LINK-PP again the future for our Fiber needs. Thank you!

28 Helpful vote Comments

t***r

South Africa

Verified Purchase

5 .0

2023-10-08

It arrived in good order and was what I expected and ordered.

18 Helpful vote Comments

B***n

Philippines

Verified Purchase

5 .0

2023-09-20

Fast delivery & easy installation. Thanks!

29 Helpful vote Comments

B***m

Poland

Verified Purchase

5 .0

2023-09-11

Great Price. Great Customer Service. Answered their phone promptly - shipped with great packaging. I would definitely shop here again.thank you!

29 Helpful vote Comments

L***n

Turkey

Verified Purchase

5 .0

2023-08-18

Unbeatable price, Fast shipping, high quality.

65 Helpful vote Comments

M***m

Belgium

Verified Purchase

5 .0

2023-05-19

The experience with l-p.com was very good. The only complaint was that 10/25/40G Transceiver Modules was received a little late than I expected. Hope it would be Faster for my next purchase. Thank you.

40 Helpful vote Comments

O***g

Malaysia

Verified Purchase

5 .0

2023-05-02

Fast shipping, good service, high quality.

45 Helpful vote Comments

K***e

Japan

Verified Purchase

5 .0