จัดส่งฟรี: THB 3,319+ (ตัวรับส่งสัญญาณและกรง) THB 20,118+ (สินค้าอื่นๆ) สำหรับปริมาณที่มากกว่านี้ หรือต้องการราคาพิเศษ โปรดติดต่อเราโดยตรง
ต้องการความช่วยเหลือ?
สนทนาสดกับเรา
แชทสด
ต้องการโทรไหม?

+ 86-752-3386717

Thailand · Thai · THB
  • รองรับตัวอย่างฟรีช่วยให้คุณบรรลุผลการทดสอบอย่างมีประสิทธิภาพ

  • ทีมงานมืออาชีพให้การสนับสนุนและบริการเพื่อแก้ไขปัญหาของคุณทันเวลา

  • ถามอะไรก็ได้ที่คุณอยากรู้ เราพร้อมช่วยเหลือคุณตลอด 24 ชั่วโมง 7 วันต่อสัปดาห์

  • รับใบเสนอราคาอย่างรวดเร็วและเสนอบริการระดับมืออาชีพมากขึ้น

  • เจาะลึกรายละเอียดเกี่ยวกับคู่มือทางเทคนิค มาตรฐานอุตสาหกรรม และข้อมูลเชิงลึกเกี่ยวกับความเข้ากันได้ของ SFP

  • ข้อมูลเปรียบเทียบประสิทธิภาพผลิตภัณฑ์โดยละเอียดและแบบเคียงข้างกัน เพื่อช่วยให้คุณเลือกโมดูลที่เหมาะสม

  • สำรวจโซลูชันการเชื่อมต่อในโลกแห่งความเป็นจริงสำหรับศูนย์ข้อมูล องค์กร และเครือข่ายโทรคมนาคม

  • คำแนะนำที่สำคัญในการเลือกอัตราการส่งข้อมูล ระยะการส่งข้อมูล และประเภทของตัวเชื่อมต่อ

เลือกสกุลเงิน
USD - ดอลลาร์สหรัฐ
ยูโร - ยูโร
GBP - ปอนด์อังกฤษ
CAD - ดอลลาร์แคนาดา
AUD - ดอลลาร์ออสเตรเลีย
JPY - เยนญี่ปุ่น
SEK - โครนาสวีเดน
NOK - โครนนอร์เวย์
IDR - รูเปียห์อินโดนีเซีย
BRL - เรียลบราซิล
บาท - บาทไทย
LP11FC01030 qsfp28 1x1 cage with heat sink emi spring finger

LP11FC01030 QSFP28 1x1 กรงพร้อมฮีทซิงค์ EMI สปริงนิ้ว

สรุปสินค้า

สินค้า
LP11FC01030 QSFP28 1x1 กรงพร้อมฮีทซิงค์ EMI สปริงนิ้ว
SKU
200657
P / N
LP11FC01030
ราคา
THB 108
หุ้น
490 ในสต็อก
ขาย
2.5K
URL ผลิตภัณฑ์
https://www.l-p.com/products/490796.htm
ราคาต่อหน่วย THB 108
ผู้ใช้ใหม่: THB 335 คูปองส่วนลดสำหรับการสั่งซื้อครั้งแรกของคุณ
รหัส linkpp2610
สำหรับการสั่งซื้อเกิน THB 33,530 เข้ามา THB 503 Off
รหัส Linkpp15
สำหรับการสั่งซื้อเกิน THB 100,590 เข้ามา THB 1,677 Off
รหัส Linkpp50
สำหรับการสั่งซื้อเกิน THB 167,650 เข้ามา THB 3,353 Off
รหัส Linkpp100
P / N: LP11FC01030SKU: 200657

LINK-PP เป็นต้นฉบับแผ่นข้อมูล3D รุ่นดาวน์โหลดทั้งหมด

ร่วมกันได้:
LINK-PP
Molex
P/N ที่เข้ากันได้:
LP11FC01030
การกำหนดราคาตามปริมาณ ระดับการสั่งซื้อออนไลน์ · สั่งซื้อจำนวนมากหรือขอราคาพิเศษได้ตามต้องการ
THB 108
1–99 ชิ้น
THB 105
100–999 ชิ้น
THB 100
1,000–4,999 ชิ้น
THB 92
5,000–9,999 ชิ้น
THB 85
≥10,000 ชิ้น

หากต้องการปริมาณมากกว่านี้ หรือต้องการต่อรองราคา โปรดติดต่อเรา

สต็อก:
490 ในสต็อก
การส่งสินค้า:
THB 575
ไปยัง ประเทศไทย ผ่านทาง เฟดเอ็กซ์ ไอพี
เวลาจัดส่งโดยประมาณ : 3 - 6 วัน
5- รับประกันปี 15-Day Returns การแลกเปลี่ยนภายใน 15 วัน
การประกัน
  • รับประกันสินค้า 5 ปี ซึ่งถือเป็นระยะเวลารับประกันที่ยาวนานที่สุดในอุตสาหกรรม
  • อ่านตารางสำหรับ รายละเอียด ของการรับประกันสินค้าทั้งหมด
การคืนสินค้าและการแลกเปลี่ยน
  • จะได้รับเงินคืนประมาณ 5 วันทำการหลังจากได้รับสินค้าที่ส่งคืนแล้ว
  • สินค้าที่มีอยู่ในสต็อกสำหรับเปลี่ยนทดแทน สามารถจัดส่งได้ภายใน 1 วันทำการ
  • โปรดอ่านนโยบายการคืนสินค้าฉบับเต็ม รายละเอียด.
จัดส่งฟรีเมื่อซื้อครบ THB 3,319.
หรือเลือกใช้บริการจัดส่งผ่านบัญชี UPS / FedEx / DHL ของคุณเองในขั้นตอนการชำระเงิน (THB 0 การส่งสินค้า).
ปริมาณ:
ราคารวม:
THB 108

LINK-PP LP11FC01030 QSFP28 1x1 Cage พร้อมฮีตซิงก์แบบสปริง EMI

LINK-PP ส่วนหนึ่ง จำนวน
LP11FC01030 สถานะส่วนหนึ่ง ใช้งาน
สไตล์ตัวเชื่อมต่อ กรงพร้อมอ่างระบายความร้อน ประเภทการเชื่อมต่อ QSFP28
จำนวนตำแหน่ง - ประเภทการติดตั้ง ทะลุผ่านรูมุมขวา
การสิ้นสุด กดพอดี คุณสมบัติ ป้องกัน EMI
การกำหนดค่าพอร์ตเมทริกซ์ พอร์ต 1x1 จำนวนพอร์ต 1
จำนวน EON ด้านหลังต่อคอลัมน์พอร์ต 1 อัตราข้อมูล (สูงสุด) (Gb/s) -
ช่วงอุณหภูมิ -40 - 85 °ซ แอปพลิเคชัน I/O แบบปลั๊กอิน -
การประยุกต์ใช้วงจร สัญญาณ ประเภทคุณลักษณะการป้องกัน EMI สปริง EMI ภายใน/ภายนอก
รวมหลอดไฟ NO วัสดุกรง เงินนิกเกิล
ความสูง (นิ้ว/มม.) 0.380/9.65 ความยาว (นิ้ว/มม.) 2.408/61.17
ความกว้าง (นิ้ว/มม.) 0.768/19.50

LINK-PP

จับคู่ผลิตภัณฑ์

ภาพ ID # รายละเอียด ราคา หุ้น เพิ่มไปที่รถเข็น

ดาวน์โหลด

การเขียนแบบผลิตภัณฑ์ LP11FC01030.pdf

คำถามและคำตอบ

ยังไม่มีคำถามใดๆ

เป็นคนแรกที่สอบถามเกี่ยวกับข้อมูลจำเพาะ ความเข้ากันได้ หรือระยะเวลาในการจัดส่ง

ส่งคำถาม
  • A:
    We rate them at 500 insertions with the contact force staying above 8N, and in our test it only dropped from 16N to 12N at 500 cycles. That is the number to design to. Beyond 500 the force drops faster because the finger takes a permanent set. If your application involves frequent module swaps, like a lab or a test bench, plan to replace the cage rather than the module, it is the cheaper part. by LINK-PP Technical Support
  • A:
    This part is 3.2kN to 3.8kN with 2.05mm tails, designed for a 1.6mm to 2.0mm board. On a 2.4mm backplane you need the long tail version, the standard eye will not protrude far enough and you get a partial contact that passes continuity but fails after thermal cycling. Tell us your board thickness at order time and we will confirm the right tail length, it is not something to guess. by LINK-PP Technical Support
  • A:
    Press-fit cages can be pulled with a proper extraction tool, but the tails deform and I would not reuse the cage, the second press will not hold the same retention. The board is usually fine if you use a tool that pulls straight and support the vias from below. We budget one new cage per rework. Do not try to pry it out with a screwdriver, that is how you rip out a via barrel and scrap the board. by LINK-PP Technical Support
  • A:
    Direct contact is the design intent and it is enough if the module can is flat, which it is on standard QSFP28 parts. A pad adds about 1℃ of resistance but helps if your modules have a slightly convex can. We do not supply a pad, and adding one changes the insertion depth, so check the cage stop before you do. The measured 71℃ number is without any pad. by LINK-PP Technical Support
  • A:
    At 45℃ ambient you need about 200 LFM to hold a 4W module at 71℃ case temperature, and 400 LFM gets you to 66℃. Below 100 LFM the sink saturates and you will see 78℃ to 82℃, which is where modules start throttling. Our test used a single 40mm fan at the cabinet inlet. If your airflow is lower, derate to 3.5W modules or add a second fan before you commit the design. by LINK-PP Technical Support

ความคิดเห็นของลูกค้า

  • 5

    27 รีวิว

  • 5 ดาว
    96%
    4 ดาว
    4%
    3 ดาว
    0%
    2 ดาว
    0%
    1 ดาว
    0%
  • รีวิวทั้งหมด (27)
ไม่มีข้อมูล
R *** ฉัน
อาร์เจนตินา
ตรวจสอบการสั่งซื้อ
4.0
2026-10-14
Cages press in fine and the modules link at 100G, but one of the twenty arrived with a bent EMI finger and a scuffed heat sink. Bent the finger back, it works, but the inner box had no foam.
R *** n
บราซิล
ตรวจสอบการสั่งซื้อ
5.0
2026-10-03
Field note after 6 months on 60 units in an edge cabinet: no thermal throttling events in telemetry, no cage corrosion, spring force still 13N. Module case temperatures logged 68℃ to 74℃ at peak, with 200 LFM airflow from a single 40mm fan. If your airflow is below 100 LFM, derate to 3.5W modules or add a second fan, the sink needs moving air to work.
Y *** n
สหรัฐอาหรับเอมิเรตส์
ตรวจสอบการสั่งซื้อ
5.0
2026-07-06
Deployed 60 units in an outdoor edge cabinet that swings from -15℃ to 58℃. After 6 months, pulled 10: no cage discoloration, spring fingers still at 13N to 14N, heat sink fins clean with no corrosion. Module case temperatures logged at 68℃ to 74℃ at peak. No throttling events in the telemetry. For a part at this price, that is a boringly good result.
F *** แหล่ง
อิสราเอล
ตรวจสอบการสั่งซื้อ
5.0
2026-07-02
We compared this against buying a cage and a heat sink separately. Integrated saved 3 parts, 14 seconds of assembly, and about 90 cents per unit at our volume. It also removed a thermal interface variability problem, the pad thickness was never consistent when our operators applied it by hand. For a 100G design where 5℃ matters, that consistency is worth more than the cost saving.
M *** เมตร
ออสเตรเลีย
ตรวจสอบการสั่งซื้อ
5.0
2026-04-23
Mechanical: 500 module insertions, then measured spring force. Started at 16N, ended at 12N, still above the 8N needed for EMI contact. No permanent deformation of the fingers, no cracking at the cage seams. The heat sink attachment screws did not loosen after 200 thermal cycles from -40℃ to 85℃, which was my main worry with a two piece assembly.
ตรวจสอบการสั่งซื้อ
.0
การแสดง ความเห็น

By 

ยังไม่มีรีวิว

ร่วมแบ่งปันประสบการณ์ของคุณกับผลิตภัณฑ์นี้ก่อนใคร

เขียนรีวิว
|
ขาย