The SFPP-10G-DW60 is a 10GBASE-DWDM SFP+ transceiver module engineered for the 100GHz ITU Grid at 1529.55nm (Channel 60). Integrating a cooled EML transmitter and a PIN photodiode receiver, it supports data transmission up to 40km over single-mode fiber (SMF) with integrated real-time digital diagnostic monitoring (DDM).
Juniper Part Number
SFPP-10G-DW60
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1529.55nm
Max Cable Distance
40km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
PIN
TX Power
-1 to +2dBm
RX Power
-16 to -1dBm
Receiver Sensitivity
-15.5dBm
DDM/DOM
Supported
Operating Temperature Range
0°C to +70°C
Protocols
SFP+ MSA, CPRI, eCPRI, SFF-8472, SFF-8431
Key Features of Juniper SFPP-10G-DW60 Compatible LINK-PP 10G SFP+
Juniper SFPP-10G-DW60 Compatible LINK-PP provides a cost-effective 10G DWDM optical solution engineered to maximize single-mode fiber efficiency. It delivers stable 40km transmission alongside real-time link diagnostics to ensure seamless high-density data transport.
This DWDM transceiver features a hot-pluggable SFP+ footprint that allows smooth installation without disrupting active host equipment. Fully compliant with the SFP+ MSA, it guarantees seamless electrical and mechanical compatibility across standard networking platforms.
SFPP-10G-DW60: 10 Gbps Connectivity for Metro DCI Networks
Supporting full 10Gbps data rates, this SFP+ DWDM module provides continuous optical throughput for point-to-point connections between nearby data centers. It effortlessly handles high-bandwidth aggregation across metro distances to prevent network congestion.
SFPP-10G-DW60 Module with DWDM Technology for Fiber Efficiency
Dense wavelength division multiplexing technology combines multiple data channels onto a single physical fiber strand. By operating on the standardized 100GHz ITU grid, it drastically multiplies optical capacity without the cost of running new cabling.
SFPP-10G-DW60 Module with 1529.55nm Wavelength
Channel 60 (C60) transmission operates at a precise 1529.55nm optical frequency within the C-band spectrum. A stabilized, cooled EML laser maintains this exact spectral alignment to prevent signal drift and adjacent-channel crosstalk.
SFPP-10G-DW60 Module Supporting 40km Transmission
An optimized optical link budget enables reliable point-to-point data transport across distances up to 40km over single-mode fiber. The integrated PIN photodiode receiver preserves signal integrity throughout these mid-reach optical spans without requiring intermediate amplification.
SFPP-10G-DW60 Module with Duplex LC Interface
The industry-standard duplex LC optical receptacle ensures positive latching and minimal insertion loss during fiber patching. Its universally recognized form factor simplifies cable routing and fits effortlessly into standard high-density patch panels.
SFPP-10G-DW60 Module with DDM for Real-Time Monitoring
Built-in digital diagnostic monitoring grants network operators continuous access to critical operating parameters like optical power, laser bias current, and operating temperature. These real-time telemetry metrics simplify maintenance routines and speed up link fault isolation before outages occur.
The Juniper SFPP-10G-DW60 Compatible LINK-PP DWDM 10G SFP+ module complies with strict international standards, holding ISO 9001, CE, RoHS, and FCC certifications to ensure environmental safety and product quality.
Each SFP+ DWDM module undergoes rigorous optical and electrical evaluations to guarantee dependable performance before shipment.
SFPP-10G-DW60 Quality Certifications
These verified credentials confirm that the transceiver adheres to globally recognized manufacturing benchmarks and safety regulations.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
SFPP-10G-DW60 Certified for Reliable Host-Device Compatibility
Comprehensive interoperability testing ensures seamless plug-and-play operation across major switches, routers, and optical transport systems.
Comprehensive hardware and optical inspections ensure that every SFPP-10G-DW60 10G DWDM SFP+ module meets exacting performance benchmarks prior to deployment. For detailed testing procedures and quality standards, check out the LINK-PP Test Support Center.
Optical Spectrum Test
Verify wavelength accuracy to prevent channel crosstalk across dense grids.
Eye Pattern Test
Analyze signal waveform clarity to confirm standard optical pulse quality.
Bit Error Rate Test
Evaluate data transmission fidelity to ensure flawless, error-free optical transport.
Temperature Test
Assess thermal stability to ensure continuous operation across commercial environments.
Product Shipping for Juniper SFPP-10G-DW60 Compatible LINK-PP 10G SFP+
Careful packaging protects every SFPP-10G-DW60 10G SFP+ DWDM module throughout its entire transit journey. We partner with dependable carriers to guarantee prompt delivery to global customers.
Anti-Static Protective Packaging
Shield delicate electronic components against electrostatic discharge during transit.
Shock-Resistant Transport Protection
Protect optical modules against vibration and impact during shipping.
Fast Order Processing and Dispatch
Prepare and dispatch optical inventory rapidly for prompt project deployment.
Global Logistics and International Delivery
Deliver orders safely across international borders via reliable global couriers.
Plug the SFPP-10G-DW60 module into an SFP+ port and patch duplex LC fiber directly into your DWDM Mux/Demux C60 channel port. This simple setup routes optical signals across metro DCI networks, maximizing fiber efficiency between inter-site data centers.
SFPP-10G-DW60 Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal SFPP-10G-DW60 module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Yes, it is fully tested and qualified for LTE fronthaul and midhaul systems running up to 10.7Gbps. It provides reliable, low-latency transmission across long-distance single-mode fiber runs. by LINK-PP Technical Support
Yes, it features a hot-pluggable SFP+ footprint so you can install or swap it without powering down your gear. The switch will detect the optic automatically. by LINK-PP Technical Support
It uses a cooled EML laser designed specifically for tight 100GHz C-band channel stability. This cooling mechanism prevents wavelength drift under fluctuating switch workloads. by LINK-PP Technical Support
Yes, it operates on the standard 100GHz ITU grid wavelength 1529.55nm and multiplexes cleanly with other DWDM channels through standard passive DWDM Mux/Demux units. by LINK-PP Technical Support
Our network team needed a C60 1529.55nm SFP+ module for an existing 100GHz DWDM channel plan. This module fit the duplex LC SMF patching and passed traffic at 10Gbps without errors. It is a practical option when expanding an established wavelength system.
Please write comments with more than three
character.
498438
527060
N***n
Austria
Verified Purchase
5.0
2026-03-08
We used the LS-DW6010-40C 40km DWDM module for a building-to-building fiber connection supporting video surveillance and office traffic. The link has remained steady for weeks. It is not flashy, but for a 10G DWDM deployment, it does exactly what we need.
Please write comments with more than three
character.
498438
527062
M***s
United Kingdom
Verified Purchase
5.0
2026-02-27
We use this 40km SFP+ DWDM module between two office buildings with single-mode fiber. The EML transmitter gives us a solid optical signal, while the PIN receiver has handled normal loss comfortably. Good fit for a straightforward enterprise fiber network upgrade.
Please write comments with more than three
character.
498438
527058
M***s
Sweden
Verified Purchase
4.0
2026-01-04
Delivery took a little longer than expected for our project schedule. Packaging was otherwise fine, and the 10G DWDM SFP+ module worked correctly once installed.
Please write comments with more than three
character.
498438
527065
A***s
Mexico
Verified Purchase
5.0
2025-10-30
Connected my 10G NAS across campus buildings over dark fiber. The 100GHz grid spacing matched our existing DWDM filter perfectly. Smooth data transfers all week.
Singapore · English · SGD
