DWDM-SFP10G-31.12-40 functions as a 10GBASE-DWDM SFP+ optical module that combines a 1531.12nm (C58, 100GHz ITU) cooled EML laser and a PIN photodiode for up to 40km SMF transmission. It also incorporates built-in digital diagnostic monitoring for real-time link surveillance and simplified system maintenance.
H3C Part Number
DWDM-SFP10G-31.12-40
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1531.12nm
Max Cable Distance
40km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
PIN
TX Power
-1 to +2dBm
RX Power
-16 to -1dBm
Receiver Sensitivity
-15.5dBm
DDM/DOM
Supported
Operating Temperature Range
0°C to +70°C
Protocols
SFP+ MSA, CPRI, eCPRI, SFF-8472, SFF-8431
Key Features of H3C DWDM-SFP10G-31.12-40 Compatible LINK-PP 10G SFP+
H3C DWDM-SFP10G-31.12-40 Compatible LINK-PP module is a 10G SFP+ module that supports DWDM technology on a 1531.12nm channel for links up to 40km. It helps businesses expand network bandwidth over single-mode fiber while offering real-time monitoring and easy plug-and-play setup.
The transceiver features a hot-pluggable SFP+ footprint that allows seamless installation or replacement without taking host switches offline. Full compliance with the SFP+ MSA standard ensures direct interoperability across a broad range of multi-vendor networking equipment.
DWDM-SFP10G-31.12-40: 10 Gbps Connectivity for Enterprise Optical Rings
Dedicated 10Gbps transmission delivers stable throughput to handle data-intensive traffic across modern enterprise ring topologies. This bandwidth capability ensures uninterrupted data exchange between aggregation switches and corporate core nodes.
DWDM-SFP10G-31.12-40 Module with DWDM Technology for Fiber Efficiency
Dense Wavelength Division Multiplexing enables multiple independent channels to transmit over a single fiber pair simultaneously. This channel multiplexing drastically cuts cabling overhead and maximizes the carrying capacity of existing dark fiber runs.
DWDM-SFP10G-31.12-40 Module with 1531.12nm Wavelength
Operation at 1531.12nm aligns precisely with ITU-T Channel 58 on the standard 100GHz C-band frequency grid. A stable cooled EML transmitter locks the light source to prevent spectral drift and eliminate adjacent-channel crosstalk.
Single-mode fiber links can span distances up to 40km through a balanced optical power budget. This coverage makes it suitable for bridging distant metro facilities and multi-building campus networks without intermediate signal regeneration.
DWDM-SFP10G-31.12-40 Module with Duplex LC Interface
An industry-standard duplex LC receptacle provides a secure, low-loss mechanical connection for standard single-mode patch cords. Its push-pull latching mechanism simplifies cable routing and maintains tight alignment in high-density patch panels.
DWDM-SFP10G-31.12-40 Module with DDM for Real-Time Monitoring
Digital Diagnostic Monitoring (DDM) continuously tracks operational metrics including operating temperature, laser bias current, supply voltage, and optical power. These live telemetry values help technicians pinpoint emerging optical faults early and reduce costly network downtime.
H3C DWDM-SFP10G-31.12-40 Compatible LINK-PP DWDM 10G SFP+ module meets strict international safety and environmental standards, holding certifications including ISO 9001, CE, RoHS, and FCC.
Every DWDM SFP+ transceiver undergoes rigorous optical parameter verification and full functional testing before shipment to ensure dependable product reliability.
DWDM-SFP10G-31.12-40 Quality Certifications
These recognized credentials verify that the module is manufactured under standardized quality controls that prioritize operational safety and environmental protection.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DWDM-SFP10G-31.12-40 Certified for Reliable Host-Device Compatibility
This SFP+ DWDM module is thoroughly tested on major brand switches and routers to guarantee seamless plug-and-play network operation.
Each DWDM-SFP10G-31.12-40 10G DWDM SFP+ transceiver undergoes strict quality evaluations to ensure stable signal transmission and flawless network connectivity. For detailed inspection procedures, please explore the LINK-PP Test Support Center.
Optical Spectrum Test
Verify central wavelength precision to prevent channel signal interference.
Eye Pattern Test
Analyze optical signal waveforms to ensure crisp transmission clarity.
Bit Error Rate Test
Check data transfer accuracy to eliminate packet loss errors.
Temperature Test
Confirm thermal operating stability across standard commercial network environments.
Product Shipping for H3C DWDM-SFP10G-31.12-40 Compatible LINK-PP 10G SFP+
Every DWDM-SFP10G-31.12-40 10G SFP+ DWDM module is securely packed and handled with care to ensure safe arrival. Our streamlined fulfillment system guarantees quick dispatches and dependable tracking for worldwide customers.
Anti-Static Protective Packaging
Prevent electrostatic discharge damage during standard handling and long transit.
Shock-Resistant Transport Protection
Shield sensitive optical components against mechanical impacts during shipping transit.
Fast Order Processing and Dispatch
Prepare and dispatch purchases quickly to minimize customer waiting times.
Global Logistics and International Delivery
Ship transceivers worldwide through trusted carriers for dependable delivery.
Install the DWDM-SFP10G-31.12-40 module into an SFP+ port and patch it directly to a 100GHz C58 DWDM MUX/DEMUX port. Once connected via duplex LC single-mode fiber, it multiplexes dedicated 10Gbps wavelength channels to build high-capacity enterprise optical rings.
DWDM-SFP10G-31.12-40 Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal DWDM-SFP10G-31.12-40 module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
No, this DWDM module uses an EML laser engineered strictly for single-mode fiber (9/125µm SMF) with duplex LC connectors and will not perform reliably over multi-mode fiber. by LINK-PP Technical Support
The module operates at an optical frequency of 195.8THz on the standard ITU grid. This perfectly aligns with 100GHz grid C58 channels on passive multiplexers. by LINK-PP Technical Support
Yes, this optical module is fully rated for LTE transport systems carrying high-speed optical traffic. It provides reliable low-latency performance for cellular aggregation links. by LINK-PP Technical Support
No, it operates on a standard single +3.3V DC power rail supplied directly by the switch SFP+ slot. It does not require any dedicated external power source. by LINK-PP Technical Support
No, this is a fixed-wavelength 100GHz ITU C-band transceiver rather than a tunable optic. If you need multiple DWDM channels across a mux, you will need to order each specific fixed-channel part number. by LINK-PP Technical Support
Bought a batch for a server-room fiber refresh. The modules were recognized across our compatible SFP+ ports, and the monitoring data was useful during acceptance testing. RX levels remained comfortably above the sensitivity threshold on our indoor SMF paths.
Please write comments with more than three
character.
498411
527359
J***n
Republic of Korea
Verified Purchase
5.0
2026-07-31
Used for a data center cross-connect where the fiber route has several patch panels. We checked the link budget carefully because of insertion loss, and the received power landed in a healthy range. The module has remained stable under normal equipment-room conditions.
Please write comments with more than three
character.
498411
527355
E***e
Sweden
Verified Purchase
5.0
2026-04-14
We deployed the LS-DW5810-40C module in a 10G campus fiber network carrying storage and business traffic. The modules have operated continuously without alarms. DDM data also made it easy to compare each site’s loss level during routine maintenance.
Singapore · English · SGD
