CWDM-SFP-1610 is specified as a 1610nm CWDM optical transceiver, employing a DFB laser and a PIN photodiode in a standard SFP footprint. Its single-mode fiber link distance is rated at 40km, with optical dispersion tolerance and loss budget matched to typical metro access spans. Integrated digital optical monitoring continuously reports key parameters (laser bias current, optical power, supply voltage, and operating temperature) over the 0°C to +70°C commercial temperature range.
Cisco Part Number
CWDM-SFP-1610
Vendor Name
LINK-PP
Form Factor
SFP
Max Data Rate
1.25Gbps
Wavelength
1610nm
Max Cable Distance
40km
Connector
Duplex LC
Media
SMF
Transmitter Type
DFB
Receiver Type
PIN
TX Power
-5 to 0dBm
RX Power
-26 to -1dBm
Receiver Sensitivity
-24dBm
Receiver Overload
-1dBm
EMC (Electromagnetic Compatibility)
Supported
DOM Support
Yes
Operating Temperature Range
0 to 70°C
Protocols
SFP MSA、SFF-8472
Key Features of Cisco CWDM-SFP-1610 Compatible LINK-PP 1.25G SFP
Cisco CWDM-SFP-1610 Compatible LINK-PP module is a 1G SFP transceiver that integrates CWDM technology, 1610nm wavelength, 40km reach, duplex LC interface, and digital optical monitoring (DOM) into a hot-pluggable MSA-compliant package. It operates over single-mode fiber and delivers real-time diagnostic data through its DOM function. These combined features make it a versatile option for medium-to-long distance fiber links.
This SFP transceiver adopts a hot-pluggable SFP footprint that allows quick installation and replacement without system shutdown. It is fully compliant with the SFP Multi-Source Agreement (MSA), ensuring mechanical and electrical interoperability with standard cages and host boards.
CWDM-SFP-1610: 1 Gbps Connectivity for Metro Edge Access Spans
Operating at a 1Gbps data rate, this module provides reliable connectivity for metro edge access spans where bandwidth demand is moderate. It handles typical uplink and aggregation tasks in campus or city-edge networks with ease.
CWDM-SFP-1610 Module with CWDM Technology for Fiber Efficiency
The CWDM technology embedded in this module enables multiple wavelengths to share a single physical fiber, reducing the number of fibers needed for network expansion. By using coarse wavelength division multiplexing, it helps operators make better use of existing dark fiber infrastructure.
CWDM-SFP-1610 Module with 1610nm Wavelength
This transceiver operates on the 1610nm CWDM channel, which lies in the longer-wavelength window of the standard single-mode fiber transmission band. That wavelength is selected to minimise attenuation and to align with common CWDM multiplexer/demultiplexer grids.
CWDM-SFP-1610 Module Supporting 40km Transmission
The module supports fibre transmission distances up to 40km, with an optical power budget sufficient to overcome typical fibre losses at 1610nm over that length. It is designed for single-mode fibre and maintains signal integrity across the full 40km span.
CWDM-SFP-1610 Module with Duplex LC Interface
The duplex LC connector is used on the module’s optical interface, providing a secure and standardised connection for dual-fibre patch cords. This interface is widely deployed in telecom and enterprise environments, ensuring compatibility with most fibre distribution panels.
CWDM-SFP-1610 Module with DOM for Real-Time Monitoring
Digital optical monitoring (DOM) gives this module the ability to track key operating parameters in real time. It is compatible with SFF-8472 digital diagnostics functions, reporting transmitter power, receiver power, operating temperature, supply voltage, and laser bias current continuously.
The Cisco CWDM-SFP-1610 Compatible LINK-PP 1G SFP transceiver is manufactured in compliance with strict international industrial standards. It holds key certifications including ISO 9001, CE, RoHS, and FCC to guarantee product quality and environmental safety.
Every optical transceiver undergoes rigorous functional and temperature testing prior to shipment. These evaluations verify signal integrity and operational stability under varying conditions.
CWDM-SFP-1610 Quality Certifications
Official qualification confirms that this module fulfills standard regulatory and technical requirements. These accredited credentials demonstrate consistent manufacturing quality and adherence to global industry norms.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
CWDM-SFP-1610 Certified for Reliable Host-Device Compatibility
The module is tested to ensure seamless interoperability with a wide range of standard switches, routers, and network devices. Comprehensive host integration checks prevent link errors and support reliable plug-and-play performance.
Rigorous Testing Ensures Reliable SFP Performance
Each CWDM-SFP-1610 1G SFP module undergoes thorough verification to ensure stable network connectivity and full line-rate output. Discover our complete validation methodology at the LINK-PP Test Support Center.
Optical Spectrum Test
Check transmitter wavelength precision and laser stability to maintain clean channel allocation.
Eye Pattern Test
Evaluate signal timing and waveform clarity to eliminate jitter across data streams.
Bit Error Rate Test
Confirm zero packet loss during prolonged high-density data transmission under load.
Temperature Test
Validate hardware endurance against extreme thermal fluctuations during continuous operation.
Product Shipping for Cisco CWDM-SFP-1610 Compatible LINK-PP 1.25G SFP
Each CWDM-SFP-1610 1G SFP optical transceiver is securely packed to prevent transit damage. Orders ship quickly using dependable logistics carriers worldwide.
Anti-Static Protective Packaging
Shield sensitive optical components from electrostatic discharge damage.
Shock-Resistant Transport Protection
Safeguard module electronics against sudden impacts during shipping.
Fast Order Processing and Dispatch
Prepare and dispatch inventory rapidly after order confirmation.
Global Logistics and International Delivery
Deliver shipments globally using reliable international transport services.
Connect the 1610nm CWDM SFP module into compatible host switch ports using duplex LC single-mode fiber patch cords. Its hot-swappable design simplifies installation across metro edge access spans, enabling stable 1G optical links over long distances for suburban and enterprise network aggregation.
CWDM-SFP-1610 Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal CWDM-SFP-1610 module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
Yes. Besides standard 1.25Gbps Gigabit Ethernet, this module natively supports 1.063Gbps Fiber Channel, making it fully suitable for storage area network links. (Note: If your older SAN switch applies strict vendor-locking, please ensure the module's EEPROM coding matches your switch brand to guarantee recognition.) By
admin on
2026-04-06
A:
Fiber attenuation at 1610nm is slightly higher than at 1550nm, but significantly lower than 1310nm. However, macro-bending losses are more noticeable at 1610nm, so ensure standard fiber bend radius guidelines are maintained. By
admin on
2025-09-03
A:
In most standard deployments, yes. The 40km design generally provides enough optical margin to handle the fiber distance plus typical filter insertion loss. However, since actual fiber quality and splice counts vary, we always recommend verifying your total route loss against the module's optical power budget before final turn-up. By
admin on
2025-03-12
These LS-CW611G-40C SFP transceivers replaced some aging optical modules on our 1G ring. The 1610nm CWDM channel freed up spectrum for our other services. Installation was straightforward, and the link budget is healthy even with older G.652 fiber.
Please write comments with more than three
character.
492444
451599
J***e
Argentina
Verified
Purchase
5 .0
2026-02-06
We use CWDM to multiplex multiple 1G streams over leased dark fiber. This 1610nm CWDM SFP transceiver slotted right into our edge router without optical attenuation pads needed for our 28km run. Super clean setup!
Please write comments with more than three
character.
492444
451603
R***p
Canada
Verified
Purchase
5 .0
2026-01-31
Good performance for the price point. We've had these running in a test lab for 6 weeks — no thermal issues, no CRC errors. The -26 to -1dBm RX power range gives us flexibility for varying fiber losses. Would buy again for our CWDM links.
Please write comments with more than three
character.
492444
451597
S***n
Australia
Verified
Purchase
5 .0
2025-11-02
We swapped out old optics for these 1610nm CWDM modules on our 3-node metro ring. The 40km reach gave us plenty of headroom on our fiber spans, and the link has been rock-solid for months. DOM monitoring helps us track performance without extra tools. No errors, no drops—just clean 1G Ethernet over CWDM. Perfect for operators adding wavelength services without touching the fiber plant.
Please write comments with more than three
character.
492444
451608
O***r
France
Verified
Purchase
5 .0
2025-09-14
Using these for a private fiber link between two warehouses (~15km apart). The Duplex LC connectors mate cleanly with our existing jumpers. DOM readings are consistent across all 8 modules we deployed. No errors, no flaps.
Please write comments with more than three
character.
492444
451606
I***t
Iran, Islamic Republic of
Verified
Purchase
5 .0
2025-07-06
Upgraded our multi-tenant network aggregation layer. EEPROM coding was recognized immediately by our switch OS without any vendor-lock warnings. Great pluggable optic for high-density SFP ports.
Please write comments with more than three
character.
492444
451602
N***y
United States
Verified
Purchase
5 .0
2025-02-19
We deployed these LS-CW611G-40C CWDM modules across campus buildings. The 1610nm wavelength pairs perfectly with our CWDM MUX, and the 40km spec gives us plenty of headroom on our 35km fiber run. DOM data shows stable TX power around -2dBm. Solid choice for metro Ethernet backhaul.
Please write comments with more than three
character.
492444
451604
J***y
Maldives
Verified
Purchase
5 .0
2025-01-29
Deployed these 1610nm CWDM 1G SFP transceivers for enterprise campus inter-building links. The DFB laser output is very stable and DOM diagnostics make fiber attenuation monitoring super easy from the CLI. Highly recommend for campus backbone expansion.
Singapore · English · SGD
