DWDM-SFP10G-31.90 DWDM SFP+ module operates on the 100GHz ITU C-band grid at 1531.89nm (C57), combining a cooled EML laser and PIN photodetector to achieve up to 40km transmission over single-mode fiber. It also features real-time digital optical monitoring (DOM) to facilitate proactive transceiver health diagnostics and link maintenance.
Netgear Part Number
DWDM-SFP10G-31.90
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1531.89nm
Max Cable Distance
40km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
PIN
TX Power
-1 to +2dBm
RX Power
-16 to -1dBm
Receiver Sensitivity
-15.5dBm
DDM/DOM
Supported
Operating Temperature Range
0°C to +70°C
Protocols
SFP+ MSA, CPRI, eCPRI, SFF-8472, SFF-8431
Key Features of Netgear DWDM-SFP10G-31.90 Compatible LINK-PP 10G SFP+
Netgear DWDM-SFP10G-31.90 Compatible LINK-PP module is a SFP+ DWDM transceiver engineered to deliver dependable 10Gbps transmission across 40km single-mode fiber infrastructure. Operating at 1531.89nm over the 100GHz ITU grid, this duplex LC optical module combines exceptional spectral efficiency with real-time digital optical monitoring for seamless network management.
This 10G DWDM module features a hot-pluggable SFP+ footprint that allows rapid installation and field replacement without interrupting host system operations. Fully compliant with the Multi-Source Agreement, it guarantees broad physical and electrical compatibility with diverse networking hardware.
DWDM-SFP10G-31.90: 10 Gbps Connectivity for Metro Core and Aggregation
A continuous throughput of 10Gbps empowers metropolitan core switches and aggregation routers to handle bandwidth-intensive service traffic smoothly. Such consistent high-speed capability prevents bottlenecking during peak data demands across enterprise backbones and regional transport links.
DWDM-SFP10G-31.90 Module with DWDM Technology for Fiber Efficiency
Dense wavelength division multiplexing (DWDM) enables multiple discrete optical channels to run concurrently across a shared physical single-mode strand. By maximizing usable fiber capacity, network operators can dramatically scale their transport infrastructure without installing costly new dark fiber runs.
DWDM-SFP10G-31.90 Module with 1531.89nm Wavelength
Channel C57 operation at 1531.89nm aligns precisely with the standard 100GHz ITU-T C-band grid, preventing crosstalk interference with adjacent optical paths. Its cooled EML emitter delivers stable central wavelength lock even under varying ambient thermal conditions.
Extended reach up to 40km is achieved via an optimized optical power budget paired with single-mode fiber media. This point-to-point distance capability bridges distant campus buildings and distributed metro hubs without requiring intermediate inline optical amplifiers.
DWDM-SFP10G-31.90 Module with Duplex LC Interface
The industry-standard duplex LC optical receptacle facilitates quick, secure patch-cord connections with low insertion loss and dependable optical return performance. Its compact push-pull latching mechanism saves panel space and simplifies cabling in densely packed rack patch panels.
DWDM-SFP10G-31.90 Module with DOM for Real-Time Monitoring
Digital optical monitoring (DOM) continuously tracks operating parameters such as optical transceiver temperature, laser bias current, and optical power. Network administrators can leverage these live diagnostic metrics to detect degradation early and avoid unexpected service outages.
Netgear DWDM-SFP10G-31.90 Compatible LINK-PP 10G DWDM SFP+ transceiver is manufactured under strict quality management systems and fully certified to global standards, including ISO 9001, CE, RoHS, and FCC.
Every DWDM module is subject to comprehensive optical performance and link reliability tests to guarantee zero transmission errors upon delivery.
DWDM-SFP10G-31.90 Quality Certifications
These verified credentials validate that the module meets stringent safety, environmental, and electromagnetic regulatory requirements worldwide.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DWDM-SFP10G-31.90 Certified for Reliable Host-Device Compatibility
Extensive switch and router interoperability evaluations guarantee seamless plug-and-play operation across leading networking platforms.
Each DWDM-SFP10G-31.90 DWDM SFP+ transceiver module undergoes multi-stage performance inspections to guarantee dependable transmission stability and robust signal integrity across every link. For deeper technical insights into our verification standards and procedures, please explore the LINK-PP Test Support Center.
Optical Spectrum Test
Verify central wavelength precision and optical spectral output stability.
Eye Pattern Test
Analyze optical signal clarity and electrical jitter margin levels.
Bit Error Rate Test
Confirm zero transmission errors during full throughput data benchmarking.
Temperature Test
Ensure consistent module performance across standard operating thermal thresholds.
Product Shipping for Netgear DWDM-SFP10G-31.90 Compatible LINK-PP 10G SFP+
Every DWDM-SFP10G-31.90 10G DWDM module is packed and handled with industry-standard care to ensure it arrives in optimal operating condition. Our efficient logistics workflows guarantee rapid dispatch and dependable delivery to destinations worldwide.
Anti-Static Protective Packaging
Shield delicate electronic components against electrostatic discharge during handling.
Shock-Resistant Transport Protection
Safeguard optical transceivers against accidental impacts during transit.
Fast Order Processing and Dispatch
Accelerate warehouse fulfillment to prepare products for immediate shipment.
Global Logistics and International Delivery
Deliver optical transceivers safely to global customers with timely efficiency.
Deploying the Netgear DWDM-SFP10G-31.90 Compatible LINK-PP SFP+ module requires simply aligning its 1531.89nm optical output with corresponding DWDM multiplexer ports. It instantly integrates into existing dense wavelength infrastructure, providing a dedicated 10Gbps optical channel to consolidate high-density traffic across metro core and aggregation architectures.
DWDM-SFP10G-31.90 Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal DWDM-SFP10G-31.90 module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Every 10G DWDM transceiver module comes with protective dust caps pre-installed on the duplex LC optical bore. However, best practice still recommends inspecting and dry-cleaning the ferrule interface before plugging in patch cables. by LINK-PP Technical Support
No, DWDM wavelengths at 1531.89nm require standard single-mode fiber (SMF) to guide the light properly. Using multimode fiber will cause extreme signal attenuation and immediate link failure. by LINK-PP Technical Support
This SFP+ DWDM transceiver operates at an optical frequency of 195.7 THz on the standard ITU grid. This matches the nominal 1531.89nm wavelength on 100GHz channel spacing. by LINK-PP Technical Support
The module has a fixed wavelength set precisely at 1531.89nm (Channel C57 on the 100GHz ITU grid) and cannot be tuned to other DWDM channels. by LINK-PP Technical Support
Please write comments with more than three
character.
498394
528998
A***s
Brunei Darussalam
Verified Purchase
5.0
2026-01-05
Deployed this 1531.89nm DWDM SFP+ transceiver in our core switch. The duplex LC patch snapped right in, and the optical budget matched the spec sheet nicely.
Germany · English · EUR
