The FS SFP-10G32-BX10 Compatible LINK-PP module is a 10G SFP+ BIDI transceiver supporting 10.7Gbps bit rates. It operates with a 1330nm DFB laser transmitter and 1270nm PIN receiver, reaching up to 10km on single-mode fiber. The module complies with SFP+ MSA, SFF-8472, and RoHS, with a +3.3V power supply.
FS Part Number
SFP-10G32-BX10
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1330nm-TX/1270nm-RX
Max Cable Distance
10km
Connector
Simplex LC
Media
SMF
Transmitter Type
DFB
Receiver Type
PIN
TX Power
-6.5 to +2dBm
RX Power
-17 to +1dBm
Receiver Sensitivity
-14.4dBm
Receiver Overload
0.5dBm
Operating Temperature Range
0 to 70°C
Protocols
SFP+ MSA Compliant, CPRI, eCPRI
Key Features of FS SFP-10G32-BX10 Compatible LINK-PP 10G SFP+
Key features include hot-pluggable SFP+ footprint, simplex LC receptacle, real-time digital diagnostic monitoring, and low power consumption. It is available in commercial (0 to +70°C) temperature grades, ensuring flexibility for various deployment environments.
This high-performance optical module integrates a DFB laser, PIN photodiode with TIA, and MCU control unit. It is designed for 10Gbps optical links, offering cost-effective, reliable 10km transmission over single-mode fiber with class I laser safety.
SFP-10G32-BX10: 10Gbps Connectivity for IP Security Camera Networks
Ideal for IP security camera networks, this 10Gbps SFP+ module enables high-bandwidth video transmission over long distances. Its BIDI design reduces fiber usage by half, simplifying infrastructure while maintaining real-time, lossless surveillance feeds.
SFP-10G32-BX10 Module with 1330nm-TX and 1270nm-RX Wavelength
Using 1330nm for transmission and 1270nm for reception, this BIDI module allows bidirectional data flow on a single fiber strand. It pairs perfectly with complementary modules (1270nm-TX / 1330nm-RX) for full-duplex 10G links.
Engineered for single-mode fiber, the SFP-10G32-BX10 delivers stable 10km transmission at 10Gbps. With a typical output power of -5dBm and receiver sensitivity of -14.4dBm, it ensures robust signal integrity over distance.
SFP-10G32-BX10 Module with Simplex LC/UPC Interface
The simplex LC/UPC interface simplifies fiber management by using only one strand for bidirectional communication. This design reduces cable clutter and cuts infrastructure costs, making it perfect for high-density deployments and long-haul links.
SFP-10G32-BX10 Module with DOM for Real-Time Monitoring
Built-in Digital Optical Monitoring (DOM) provides real-time access to temperature, supply voltage, bias current, and TX/RX power. Network administrators can proactively diagnose link issues and ensure optimal transceiver performance without service interruption.
This module is fully compliant with SFP+ MSA, SFF-8472, RoHS, and class I laser safety standards. Certifications guarantee interoperability, environmental safety, and reliable operation in certified host equipment.
Every module undergoes rigorous quality testing including optical spectrum analysis, eye pattern testing, bit error rate (BER) validation, and temperature cycling. These programs ensure consistent, long-term performance under real-world conditions.
SFP-10G32-BX10 Quality Certifications
LINK-PP maintains ISO9001 and ISO14001 certifications. Each SFP-10G32-BX10 module complies with CE, FCC, and RoHS directives, reflecting our commitment to high-quality, environmentally responsible manufacturing.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
SFP-10G32-BX10 Certified for Reliable Host-Device Compatibility
Extensive compatibility testing with major brands (Cisco, Juniper, Arista, etc.) ensures seamless integration. The module follows MSA standards to deliver plug-and-play reliability without firmware conflicts or signal errors.
Our SFP+ modules undergo exhaustive testing across optical, electrical, and environmental parameters to guarantee stable data transmission and long-term durability in live networks.
Optical Spectrum Test
Verifies center wavelength and spectral width to ensure stable, interference-free operation.
Eye Pattern Test
Checks signal integrity, jitter, and eye mask compliance for clean, reliable data transmission.
Bit Error Rate Test
Validates BER ≤ 1×10⁻¹² under full traffic to guarantee error-free link performance.
Temperature Test
Ensures transceiver operates within specs across commercial and industrial temperature ranges.
Product Shipping for FS SFP-10G32-BX10 Compatible LINK-PP 10G SFP+
Each module is carefully packed and shipped globally. We ensure fast processing, secure handling, and real-time tracking for on-time delivery.
Anti-Static Protective Packaging
ESD-safe bags and cushioned trays prevent electrostatic and physical damage.
Shock-Resistant Transport Protection
Reinforced foam padding inside shipping cartons absorbs vibration and impact.
Fast Order Processing and Dispatch
Orders are processed within 24 hours, with express dispatch available.
Global Logistics and International Delivery
Partnering with leading carriers, we offer reliable worldwide shipping and customs support.
Simply insert the module into a 10G SFP+ port, connect a simplex LC single-mode fiber to the paired BIDI module, and power on. DOM data can be read via I²C for real-time network diagnostics and link monitoring.
SFP-10G32-BX10 Technical Support
LINK-PP provides professional technical support, including pre-sales consultation, compatibility verification, and post-deployment troubleshooting to ensure smooth network operation.
Pre-Sales Technical Consultation
Professional technical guidance to help customers select the most suitable SFP-10G32-BX10 modules based on network architecture and application requirements.
Compatibility Verification Support
Compatibility checks and validation to ensure seamless operation with Cisco switches and other supported networking platforms.
Deployment & Installation Assistance
Step-by-step support for installation, configuration, and initial deployment to ensure stable and correct operation.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle to ensure reliable performance in enterprise and carrier-grade networks.
A:
We definitely do! For bulk purchases of 100 units or more, we offer tiered volume pricing. Please reach out to our sales team directly, and we’ll get you a customized, budget-friendly quote for your data center or campus deployment. By
admin on
2026-03-22
A:
Yes, it does. The module supports up to 10.7Gbps max bit rates and is fully compatible with both CPRI and eCPRI protocols. It is an excellent, cost-effective choice for 5G base station backhaul and high-speed telecom fronthaul networks. By
admin on
2026-02-20
A:
This is a BiDi (Bidirectional) module with a Simplex LC interface, meaning it transmits and receives over just a single strand of fiber to save infrastructure costs. However, it is designed strictly for Single-Mode Fiber (SMF) up to 10km and will not function correctly over Multimode (OM3/OM4) cables. By
admin on
2026-01-15
A:
Yes, absolutely! This 10G SFP+ BiDi transceiver is fully MSA compliant and has been extensively tested for seamless compatibility with Cisco, Ubiquiti, and most major OEM switches. It’s plug-and-play right out of the box with no "unsupported transceiver" warnings. By
admin on
2025-07-16
Please write comments with more than three
character.
494178
290165
S***r
United Kingdom
Verified
Purchase
5 .0
2025-04-01
We batch deployed these 10km BiDi optics across multiple MikroTik and Arista edge routers. DDM features give us great visibility into TX/RX power. Huge cost saver for our data center!
Please write comments with more than three
character.
494178
290170
C***s
Kenya
Verified
Purchase
5 .0
2024-11-05
Tested this LS-BL332710-10C on a remote base station backhaul over 8km SMF. Link stays stable at 10Gbps even in our hot outdoor cabinet. Perfect eCPRI protocol support and OEM compatibility.
Please write comments with more than three
character.
494178
290169
W***n
Switzerland
Verified
Purchase
5 .0
2024-10-08
Deployed 50 of these 10G SFP+ BiDi modules for our campus fiber network. The 1330nm-TX/1270nm-RX pairing worked instantly with our mixed Cisco and Ubiquiti switches. DOM readings are spot on!
Please write comments with more than three
character.
494178
290162
H***n
United States
Verified
Purchase
5 .0
2023-10-30
We had a large volume for 10/25/40G Transceiver Modules each month.always had good performance. This time our Account Manager told me that it had a big price reduction, so we purchased some more which can be used for six months. Surprisingly, we received the goods quickly. That's great.
Germany · English · EUR
