LS-DW2410-40I utilizes C-band 1558.17nm DWDM technology over duplex LC single-mode fiber, pairing an EML laser and PIN photodiode engine to sustain 10G data streams up to 40km while offering live parameter visibility through integrated digital diagnostic monitoring.
LINK-PP Part Number
LS-DW2410-40I
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1558.17nm
Max Cable Distance
40km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
PIN
TX Power
-1 to +2dBm
RX Power
-16 to -1dBm
Receiver Sensitivity
-15.5dBm
DDM Support
Yes
Operating Temperature Range
-40 to 85°C
Protocols
SFP+ MSA Compliant, CPRI, eCPRI
Key Features of LINK-PP LS-DW2410-40I 10G SFP+
LINK-PP LS-DW2410-40I is an industrial-grade 10G SFP+ DWDM transceiver engineered for demanding optical links over single-mode fiber. It combines a 1558.17nm wavelength engine, 40km transmission reach, and duplex LC connectivity with real-time telemetry. This module provides a reliable hardware foundation for extended-reach networking in extreme environments.
LINK-PP LS-DW2410-40I 10G SFP+ Optical Module
The module utilizes a hot-pluggable SFP+ footprint for fast field upgrades without system downtime. It integrates a 100GHz ITU C-Band cooled EML laser alongside a sensitive PIN photodiode. This optical architecture ensures consistent signal quality and low jitter over long distances.
LS-DW2410-40I: 10 Gbps Connectivity for Long-Haul Aggregation
This DWDM SFP+ transceiver delivers stable 10Gbps line-rate throughput across regional optical backbones. It is ideal for long-haul aggregation sites where sustained data density and low latency are required. The module maintains reliable link margin across heavy traffic conditions.
LS-DW2410-40I Module with DWDM Technology for Fiber Efficiency
Built on dense wavelength-division multiplexing, this unit allows multiple channels to share a single fiber pair. It maximizes existing cable capacity without requiring expensive extra fiber runs. Network operators can easily expand bandwidth by adding distinct optical channels.
LS-DW2410-40I Module with 1558.17nm Wavelength
Operating at a fixed 1558.17nm wavelength, the laser matches standard ITU-T 100GHz grid channels. This precise spectral output reduces optical crosstalk in multi-channel DWDM systems. It helps preserve clean signal separation across complex optical mux/demux setups.
LS-DW2410-40I Module Supporting 40km Transmission
The optical power budget supports single-mode fiber spans up to 40km without external amplification. It provides a cost-effective solution for bridging distant switches, routers, and edge sites. Built-in link margin accounts for splice losses and connector attenuation over time.
LS-DW2410-40I Module with Duplex LC Interface
Equipped with an industry-standard duplex LC optical connector, the module ensures easy patching with standard fiber assemblies. The durable latching mechanism secures physical connections in high-vibration installations. It facilitates clean alignment and quick maintenance in high-density patch panels.
LS-DW2410-40I Module with DDM for Real-Time Monitoring
Integrated Digital Diagnostic Monitoring (DDM) provides instant access to key operational parameters. Engineers can track optical power, operating temperature, laser bias current, and supply voltage in real time. This live visibility simplifies link troubleshooting and helps prevent unexpected network outages.
LINK-PP LS-DW2410-40I 10G SFP+ Certification
LINK-PP LS-DW2410-40I holds full industry compliance under ISO 9001 quality management alongside CE, RoHS, and FCC certifications for safe global deployment.
Every transceiver undergoes strict optical spectrum analysis and temperature stress testing to ensure steady line-rate operation.
LS-DW2410-40I Quality Certifications
International standard compliance guarantees full environmental safety, low electromagnetic interference, and sustainable manufacturing practices.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
LS-DW2410-40I Certified for Reliable Host-Device Compatibility
Extensive interoperability testing ensures seamless plug-and-play performance across major brand switches and routers.
Every optical transceiver undergoes comprehensive line-rate validation to guarantee stable data transmission. Discover our complete quality verification process at the LINK-PP Test Support Center.
Optical Spectrum Test
Verify precise central wavelength output and spectral width compliance.
Eye Pattern Test
Evaluate optical signal clarity and waveform signal integrity instantly.
Bit Error Rate Test
Ensure error-free data transmission under maximum network load conditions.
Temperature Test
Validate stable thermal performance across harsh operating environments.
Product Shipping for LINK-PP LS-DW2410-40I 10G SFP+
We ensure safe delivery through reliable packaging and trusted global carriers. Your orders ship quickly to minimize network downtime.
Anti-Static Protective Packaging
Prevent electrostatic discharge damage using specialized protective shielding enclosures.
Shock-Resistant Transport Protection
Shield sensitive optical components against mechanical impacts during transit.
Fast Order Processing and Dispatch
Accelerate order fulfillment to ensure prompt warehouse shipment dispatch.
Global Logistics and International Delivery
Deliver optical modules worldwide using fast and reliable logistics channels.
LINK-PP LS-DW2410-40I optical module features a hot-swappable design for effortless plug-and-play installation in compatible switches. Simply insert the module into an SFP+ slot and connect LC fiber patch cables to establish resilient 10G links across long-haul DWDM, metro aggregation, and rugged industrial networks.
LS-DW2410-40I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal LS-DW2410-40I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
Yes, sample orders are available for compatibility and link validation. Once testing is complete, please share your planned order quantity, and we can provide a formal volume quotation for your project deployment. By
admin on
2026-03-11
A:
Yes. This LS-DW2410-40I DWDM module is designed for single-mode fiber transmission up to 40km, so a 32km link may be suitable if the total optical loss is within the link budget. By
admin on
2026-01-13
A:
Yes, if your DWDM MUX/DEMUX supports the 100GHz ITU C-band C24 channel at 1558.17nm and uses compatible duplex LC connections. Please verify that both sides use the same DWDM wavelength channel. By
admin on
2025-11-09
A:
Yes. The LS-DW2410-40I is compatible with SFF-8472 digital diagnostics functions and supports real-time DDM monitoring. You can check key operating parameters remotely, including module temperature, supply voltage, laser bias current, transmit optical power, and receive optical power. By
admin on
2025-08-03
A:
Yes, the module is rated for industrial operation up to +85°C case temperature. Please also make sure the equipment enclosure has adequate airflow and thermal management. By
admin on
2025-05-29
Please write comments with more than three
character.
485629
427337
T***e
India
Verified
Purchase
5 .0
2026-05-11
We used the LS-DW2410-40I 10G SFP+ module to extend a campus fiber network between two buildings about 27km apart. The link came up immediately at 10Gbps, and DOM readings for TX/RX power have remained consistent for several weeks. Nice option when you need C24 1558.17nm DWDM without replacing the installed SMF plant.
Please write comments with more than three
character.
485629
427342
B***d
Russian Federation
Verified
Purchase
5 .0
2026-04-05
Configured 10 pairs of these C24 10G DWDM modules for synchronous block-level storage replication between two data facilities separated by 29km of aerial fiber. Aerial lines suffer from seasonal attenuation shifts and wind-induced microbends, but the optical link margin on these modules absorbed all fluctuations effortlessly. DOM telemetry alarms trigger accurately when testing threshold traps in our monitoring dashboard. Dust caps fit tightly, gold-plated edge connectors show zero manufacturing burrs, and the bail latch operates smoothly even in cramped patch panels. Exceptional engineering.
Please write comments with more than three
character.
485629
427351
X***m
Netherlands
Verified
Purchase
5 .0
2026-03-21
Good choice for projects requiring 10G DWDM optics with LC duplex connectors. We verified the module’s optical diagnostics after installation and received readings within the expected TX power range. It is compact, runs cool in our environment, and fits neatly into the client’s existing DWDM design.
Please write comments with more than three
character.
485629
427345
A***m
Italy
Verified
Purchase
5 .0
2026-02-16
Our team used these 10G 40km DWDM SFP+ transceivers for a multi-site data center interconnect project. We needed a dedicated C24 1558.17nm channel to coexist with other wavelengths already present on the fiber pair. The modules were easy to inventory because the channel information was clearly aligned with our DWDM plan.
We tested link stability under continuous backup and replication traffic, with sustained 10G throughput across the route. DDM monitoring let us set useful thresholds for low RX power and high module temperature. The industrial -40°C to 85°C rating was more than our indoor racks require, but it gives us flexibility when moving equipment into edge rooms or outdoor enclosures.
Please write comments with more than three
character.
485629
427335
D***h
South Africa
Verified
Purchase
4 .0
2026-02-02
Our order arrived with proper anti-static packaging and separate labels for each item. One of the outside tape seals had loosened slightly during transit, although the carton stayed closed and nothing was missing or exposed.
Please write comments with more than three
character.
485629
427354
P***h
United States
Verified
Purchase
5 .0
2026-01-27
Needed to light up channel 24 (1558.17nm) on our existing 40-channel passive multiplexer. The duplex LC connector clicks in firmly, and insertion loss through our patch panel was well within budget. Solid budget-friendly replacement for costly first-party optics.
Please write comments with more than three
character.
485629
427339
B***e
Singapore
Verified
Purchase
5 .0
2025-12-18
We added these C24 DWDM optical transceivers to increase capacity on an existing single-mode fiber corridor without installing new cable. The 1558.17nm wavelength fit our channel plan, and the 40km reach covered the longest segment with room for normal optical loss. Installation required only standard Duplex LC/UPC fiber connections and normal SFP+ handling procedures. After commissioning, we monitored TX/RX power through the two-wire DDM interface and confirmed that all readings were within our planned limits. The module’s SFP+ MSA compliance and CPRI/eCPRI protocol support also made it suitable for a transport design serving both enterprise and mobile-network-related traffic. It is a strong value when you need industrial-grade 10G DWDM capacity on a specific ITU channel.
Please write comments with more than three
character.
485629
427350
S***n
Brazil
Verified
Purchase
5 .0
2025-12-04
The EML transmitter delivers crisp optical output, and the PIN photo detector has plenty of margin on our 28km dark fiber link. Heat dissipation inside dense top-of-rack switches is noticeably better than our older DWDM optical transceivers.
Please write comments with more than three
character.
485629
427334
C***n
Thailand
Verified
Purchase
4 .0
2025-10-23
The package arrived intact and the modules were well organized in individual protective cases. Tracking updates paused for a couple of days while the shipment was moving between hubs, but it was delivered within the expected window.
Please write comments with more than three
character.
485629
427353
W***r
Republic of Korea
Verified
Purchase
5 .0
2025-10-08
Used for a DWDM metro access build where we needed a C24 channel at 1558.17nm. This 10G DWDM optical module delivered stable receive levels on a 34km fiber run with patch panels in between. Hot-swap installation was straightforward, and the module’s DOM support helped us validate the optical path quickly.
Please write comments with more than three
character.
485629
427344
Z***y
Spain
Verified
Purchase
5 .0
2025-09-02
We deployed LS-DW2410-40I modules for a 10G DWDM ring connecting distribution sites around an industrial park. The route lengths varied from 18km to just under 36km, all using single-mode fiber and Duplex LC patching. On the 1558.17nm C24 wavelength, every link came up cleanly without manual tuning or optical attenuation adjustments.
The DDM function was especially helpful during acceptance testing. We logged module temperature, supply voltage, TX optical power, and RX optical power from the switches, then compared those numbers against our fiber-loss calculations. The reported levels were stable, and the receive sensitivity margin was adequate for the longer routes. This is a practical industrial 10G SFP+ DWDM module for campus, metro access, and distributed-site deployments.
Please write comments with more than three
character.
485629
427347
D***r
Malaysia
Verified
Purchase
4 .0
2025-08-31
The shipping protection was solid, and the LC ports were covered properly when received. Customs processing added a little time to the delivery, but the order’s tracking information helped us follow the order.
Please write comments with more than three
character.
485629
427338
A***t
Norway
Verified
Purchase
5 .0
2025-07-25
This optic was selected for a remote base-station aggregation project where fiber routes cross several outdoor handoff locations. We needed an EML-based 10G DWDM SFP+ optic with a 40km SMF rating, LC duplex connection, and industrial temperature tolerance. The LS-DW2410-40I matched those requirements without requiring a separate converter chassis.
Field tests included optical power checks, long-duration ping and throughput testing, and monitoring under daytime cabinet heat. The modules maintained link status and showed consistent DOM readings through the test window. The specified TX output and RX operating range gave us enough design margin after accounting for connector, splice, and patch-panel loss. A dependable fit for CPRI/eCPRI-related transport and general 10G fiber backhaul.
Please write comments with more than three
character.
485629
427349
V***t
Mexico
Verified
Purchase
5 .0
2025-06-30
This industrial 10G SFP+ transceiver was purchased for a mixed indoor/outdoor network upgrade. The -40 to 85°C operating range was important because one end is located in a non-conditioned roadside cabinet. It has been stable through temperature swings and provides the same clean 10G service as our indoor links.
Please write comments with more than three
character.
485629
225685
Y***s
Sweden
Verified
Purchase
5 .0
2025-05-19
We needed an industrial-temperature 10G optical transceiver for backhaul aggregation, with CPRI and eCPRI support being relevant to the project. This LS-DW2410-40I DWDM module has worked reliably on the 1558.17nm channel, even in a cabinet with limited cooling. So far, it has been a worry-free part of the rollout.
Please write comments with more than three
character.
485629
225659
C***k
Philippines
Verified
Purchase
4 .0
2025-02-28
The 10G DWDM modules arrived in good condition and were individually protected in anti-static packaging. Delivery took two extra business days due to the carrier handoff, but the project schedule was not affected.
Please write comments with more than three
character.
485629
225666
R***l
Australia
Verified
Purchase
5 .0
2025-01-15
Ran this DWDM SFP module across a 36km single-mode fiber run connecting our main data center to a warehouse annex. Link came up immediately at 10Gbps with no CRC errors or link flaps under heavy backup loads. Very satisfied with the build quality!
Please write comments with more than three
character.
485629
225684
L***s
United States
Verified
Purchase
5 .0
2024-11-11
My contact with LINK-PP involved more than just a few clicks and a purchase for 1000Base-T Optical Transceiver Module. I had to make a return for no fault of the Company and they were helpful and courteous throughout the process. I am quite pleased.
Please write comments with more than three
character.
485629
225682
m***e
Norway
Verified
Purchase
5 .0
2024-08-29
Placed a few orders over the years with Link-PP. Their customers service have been brilliant and very helpful in the past and I always found the prices very competitive.
Germany · English · EUR
