CWDM-SFP10G-1350-I operates as a specialized 10G CWDM optical transceiver module, leveraging a 1350nm cooled EML laser paired with a PIN photodiode to ensure precise signal transmission. Engineered for robust long-reach connectivity, it seamlessly drives data over single-mode fiber links spanning up to 40km. The transceiver also integrates real-time digital diagnostic monitoring to continuously track vital operational parameters and maintain flawless link integrity.
Key Features of HPE CWDM-SFP10G-1350-I Compatible LINK-PP 10.7G SFP+
HPE CWDM-SFP10G-1350-I Compatible LINK-PP module is an industrial-grade CWDM 10G SFP+ optical transceiver designed for dependable 40km transmissions over single-mode fiber. It combines a 1350nm wavelength with a duplex LC interface and real-time diagnostic monitoring to optimize fiber capacity. Built for demanding temperature environments, it delivers steady 10Gbps connectivity across modern metro and telecom networks.
Built in a hot-pluggable SFP+ footprint, this module enables quick installation and upgrades without interrupting active network operations. It strictly complies with SFP+ MSA and SFF-8472 standards, ensuring smooth hardware interoperability with standard host devices. This compliance makes it a flexible choice for expanding enterprise and telecom infrastructures.
CWDM-SFP10G-1350-I: 10 Gbps Connectivity for Long-Reach Metro Networks
Delivering a full 10Gbps line rate, this transceiver supports bandwidth-intensive data transport over extended physical distances. It is well-suited for linking distant sub-stations, enterprise campuses, and regional metro aggregation nodes. This steady line-rate performance ensures seamless data flow across demanding long-reach optical paths.
CWDM-SFP10G-1350-I Module with CWDM Technology for Fiber Efficiency
Utilizing Coarse Wavelength Division Multiplexing (CWDM), this transceiver allows multiple data channels to run over the same fiber cable. This capability maximizes existing strand usage without the need to lay costly new fiber lines. It offers an economical path for network operators looking to multiply their total carrying capacity.
CWDM-SFP10G-1350-I Module with 1350nm Wavelength
Operating on a precise 1350nm center wavelength, the module integrates cleanly into multi-channel CWDM grid layouts. Its dedicated channel frequency prevents signal crosstalk with neighboring optical wavelengths. This accurate spectral targeting ensures crisp optical signaling across long-distance links.
Equipped with a cooled EML laser and PIN receiver, this module achieves reliable point-to-point links up to 40km over single-mode fiber. It maintains strong optical link budgets without requiring extra line amplifiers along the path. This extended reach makes it well-suited for connecting geographically separated facility nodes.
CWDM-SFP10G-1350-I Module with Duplex LC Interface
Featuring an industry-standard duplex LC connector, this module ensures secure and quick fiber patch cord attachments. The compact optical connector design helps save port space in dense switch and router panels. It provides low insertion loss for clean signal coupling and stable long-term operation.
CWDM-SFP10G-1350-I Module with DDM for Real-Time Monitoring
Integrated Digital Diagnostic Monitoring (DDM) delivers live visibility into critical physical parameters like temperature, optical power, and supply voltage. Network engineers can track transmitter output and receiver light levels directly from the host equipment. This real-time telemetry helps catch signal degradation early and prevents unexpected link downtime.
Each module undergoes real-world port validation and bit-error-rate testing to guarantee stable optical performance before leaving the factory.
CWDM-SFP10G-1350-I Quality Certifications
These international approvals confirm that the hardware adheres to strict electromagnetic safety and hazardous material restrictions.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
CWDM-SFP10G-1350-I Certified for Reliable Host-Device Compatibility
Standardized firmware configurations allow the transceiver to register instantly without triggering port errors on major switch and router platforms.
Each CWDM-SFP10G-1350-I CWDM SFP+ module undergoes strict validation to guarantee stable optical links under heavy network loads. Explore our full verification protocol at the LINK-PP Test Support Center.
Optical Spectrum Test
Measure central wavelength output to prevent multi-channel CWDM signal interference.
Eye Pattern Test
Analyze waveform symmetry to ensure clean optical signal transmission quality.
Bit Error Rate Test
Confirm zero-packet-loss line-rate traffic handling across maximum link spans.
Temperature Test
Assess thermal endurance to preserve hardware stability in harsh conditions.
Product Shipping for HPE CWDM-SFP10G-1350-I Compatible LINK-PP 10.7G SFP+
Secure packaging preserves optical module integrity from factory departure to final installation. Dedicated logistics partners enable reliable transit worldwide.
Anti-Static Protective Packaging
Protect sensitive optical circuits from static electrical damage.
Shock-Resistant Transport Protection
Shield delicate transceiver components against physical impacts during transit.
Fast Order Processing and Dispatch
Pack and dispatch ordered modules quickly to prevent shipping delays.
Global Logistics and International Delivery
Route express shipments seamlessly through established worldwide transit channels.
Insert the CWDM-SFP10G-1350-I optical module into the host 10G SFP+ slot until the latch clicks securely. Connect a duplex LC single-mode fiber patch cord, ensure clean optical end-faces, and monitor real-time power metrics via host software to verify immediate line-rate link establishment.
CWDM-SFP10G-1350-I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal CWDM-SFP10G-1350-I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
No. In a CWDM MUX/DEMUX system, wavelengths must be matched to the specific filter port. You must use a 1350nm CWDM module on both ends of that specific channel, or route it through a 1350nm CWDM filter port. By
admin on
2026-03-19
A:
The LS-CW3510-40I module integrates a Cooled EML (Electro-absorption Modulated Laser). The internal cooling mechanism keeps the wavelength stable on the 1350nm CWDM grid across the entire -40°C to +85°C range, preventing adjacent-channel interference. By
admin on
2025-10-17
A:
Yes, as long as your CWDM MUX/DEMUX supports the standard 20nm grid (1270–1610nm). 1330nm and 1350nm are separate channels and won’t interfere. By
admin on
2025-04-19
Bought a batch for our data center interconnect. The SFP+ MSA and SFF-8472 compliance means they work with all our multi-vendor gear. DDM telemetry is accurate, and helps us predict fiber degradation before it becomes a problem.
Please write comments with more than three
character.
482989
449668
J***e
New Zealand
Verified
Purchase
5 .0
2026-03-09
SFP+ Multi-Source Agreement (MSA) compliance is 100% accurate. The module booted up instantly on our layer-3 distribution switches, reporting precise internal temperature, supply voltage, and laser bias current via digital diagnostics.
Please write comments with more than three
character.
482989
449674
M***s
Hungary
Verified
Purchase
5 .0
2026-01-15
We installed these CWDM SFP+ modules to connect security systems, flight displays, and baggage handling across three terminals. The 1350nm CWDM channel fits our existing wavelength plan without conflicts. The industrial temperature rating handles our rooftop equipment enclosures through seasonal extremes. DDM monitoring lets our network team check link status remotely without site visits. After 2 months of 24/7 operation, all 22 units are still performing flawlessly. The 40km reach easily covers our entire airport campus.
Please write comments with more than three
character.
482989
449673
O***t
Romania
Verified
Purchase
5 .0
2025-09-21
We deployed 48 of these LS-CW3510-40I modules in a 10G CWDM ring for our metro network. The 1350nm wavelength slots cleanly into our 8-channel CWDM grid. Over 2 months, we've seen zero wavelength drift, thanks to the cooled EML laser. The industrial temp range (-40 to 85°C) is critical for our outdoor handhole enclosures, which see extreme seasonal swings. DDM/DOM integration with our NMS (via SFF-8472) gives us real-time TX/RX power, temperature, and bias current telemetry. We've caught two instances of fiber degradation early by monitoring RX power trends. For the price, these are hard to beat for industrial CWDM deployments.
Please write comments with more than three
character.
482989
449687
F***n
Thailand
Verified
Purchase
5 .0
2025-08-04
Configured this module in a remote 10G SFP+ aggregation switch linking our storage cluster over 18km of dark fiber. The cooled EML laser maintains steady center wavelength stability even under heavy 10GbE line-rate saturation.
Please write comments with more than three
character.
482989
449677
K***s
Belgium
Verified
Purchase
5 .0
2025-07-19
High-heat outdoor cabinet deployment where internal temps easily exceed +60°C in summer. These industrial modules handle the thermal load without throttling optical output power or dropping link integrity. Impressive reliability!
Please write comments with more than three
character.
482989
449680
C***t
Israel
Verified
Purchase
5 .0
2025-06-25
Our trading firm set up a 10G backup link between primary and disaster recovery sites 28km apart. These CWDM modules provide the redundancy we need at a fraction of the cost of branded optics. The industrial-grade components give us confidence for 24/7 operation. The SFP+ form factor fits our existing switch infrastructure without any compatibility issues. We run monthly failover tests, and the modules always establish a link immediately. The DOM data integrates with our monitoring dashboard for proactive maintenance.
Please write comments with more than three
character.
482989
449683
C***e
Singapore
Verified
Purchase
5 .0
2025-06-18
We needed to add a 10Gbps channel to an existing passive CWDM Mux/Demux system across our inter-building campus link. The 1350nm grid wavelength locked in immediately, and DOM diagnostics show healthy Tx and Rx optical power over 22km. Super clean deployment!
Please write comments with more than three
character.
482989
449672
E***e
Philippines
Verified
Purchase
5 .0
2025-03-24
Ordered 16 units for our municipal traffic camera surveillance backbone. SFP+ slots recognized the modules without throwing vendor lock warnings, and the 40km optical power budget easily overcame our intermediate patch loss. Very satisfied with these 10G CWDM modules!
Please write comments with more than three
character.
482989
449676
I***r
Indonesia
Verified
Purchase
5 .0
2025-01-08
Integrated these 1350nm CWDM SFP+ transceivers into our industrial automation network inside a manufacturing plant. Withstands severe electromagnetic interference and elevated ambient rack temps without link flapping. High-quality physical layer build!
Germany · English · EUR
