The XBR-SFP10G1290-40-I optical transceiver leverages a precise 1290nm EML laser and PIN photodiode architecture to deliver 10G SFP+ CWDM connectivity across single-mode fiber infrastructure. This module seamlessly facilitates reliable data transmission over distances up to 40km through a duplex LC interface. Additionally, it incorporates comprehensive real-time digital optical monitoring (DOM) to ensure continuous link visibility and proactive network management.
Key Features of Brocade XBR-SFP10G1290-40-I Compatible LINK-PP 10.7G SFP+
Brocade XBR-SFP10G1290-40-I Compatible LINK-PP integrates a hot-pluggable SFP+ MSA form factor with a 10Gbps data rate and CWDM optical grating. It utilizes a 1290nm EML laser transmitter and PIN photodiode receiver to achieve 40km single-mode transmission through a duplex LC interface. Furthermore, it incorporates SFF-8472 compliant digital optical monitoring for real-time telemetry of bias current and optical power.
This CWDM 10G SFP+ module features a hot-pluggable SFP+ mechanical footprint designed for seamless cage insertion and extraction. It strictly complies with the SFP+ Multi-Source Agreement to ensure electrical and physical interoperability with host switches. Additionally, it adheres to the SFF-8472 specification for standardized two-wire management interfaces.
XBR-SFP10G1290-40-I: 10 Gbps Connectivity for Metro Edge Backhaul
The transceiver delivers a line-rate throughput of 10Gbps to support high-density metro edge backhaul traffic. It accommodates heavy packet forwarding loads and data streams without frame loss. This transmission bandwidth capacity maintains low latency across aggregation node connections.
XBR-SFP10G1290-40-I Module with CWDM Technology for Fiber Efficiency
Coarse Wavelength Division Multiplexing technology multiplexes multiple optical carrier frequencies onto a single strand of single-mode fiber. It utilizes standardized ITU-T G.694.2 grid spacing to isolate discrete spectral channels. This optical multiplexing scheme maximizes existing fiber plant capacity without dark fiber deployment.
XBR-SFP10G1290-40-I Module with 1290nm Wavelength
The optical transmitter utilizes an EML laser engineered around a precise 1290nm central wavelength channel within the CWDM spectrum. It maintains a controlled spectral width designed to operate within standard CWDM grid tolerances. This specific wavelength parameter ensures proper channel isolation when deployed with multi-wavelength MUX/DEMUX configurations.
This optical module is engineered to support reliable data transmission over single-mode fiber links reaching distances up to 40km. It provides the necessary optical power budget to bridge long intermediate spans without signal loss. This extended reach capability ensures stable and dependable long-distance connectivity.
XBR-SFP10G1290-40-I Module with Duplex LC Interface
The optical port utilizes a physical duplex LC receptacle configuration for independent transmit and receive fiber strands. It maintains precise ferrule alignment to minimize insertion loss and optical back-reflection. This standard interface mates securely with standard single-mode patch cords.
XBR-SFP10G1290-40-I Module with DOM for Real-Time Monitoring
Digital Optical Monitoring provides continuous, real-time tracking of critical internal operating parameters. It monitors key metrics including operating temperature, supply voltage, laser bias current, and optical Tx/Rx power. These telemetry values are accessible through the two-wire management interface for easy operational status checks.
Brocade XBR-SFP10G1290-40-I Compatible LINK-PP module maintains strict industry compliance with ISO 9001, CE, RoHS, and FCC standards to ensure hardware reliability and safety.
Each transceiver undergoes a rigorous optical and electrical testing program to validate signal integrity before deployment.
XBR-SFP10G1290-40-I Quality Certifications
The module holds recognized international quality certifications that confirm its adherence to strict manufacturing and environmental regulations.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
XBR-SFP10G1290-40-I Certified for Reliable Host-Device Compatibility
Comprehensive verification processes ensure seamless mechanical and electrical interoperability across a wide range of standard host networking switches.
Each SFP+ module undergoes strict validation to guarantee stable operation. Discover the complete validation methodology at the LINK-PP Test Support Center.
Optical Spectrum Test
Measure exact spectral purity and channel spacing.
Eye Pattern Test
Evaluate high-speed signal jitter and waveform closure.
Bit Error Rate Test
Assess digital data transmission accuracy under load.
Temperature Test
Monitor transceiver stability across thermal fluctuations.
Product Shipping for Brocade XBR-SFP10G1290-40-I Compatible LINK-PP 10.7G SFP+
Every XBR-SFP10G1290-40-I 10G SFP+ module is securely packaged to prevent transit damage. Reliable global delivery ensures your hardware arrives safely on schedule.
Anti-Static Protective Packaging
Shield electronic circuits from electrostatic discharge during transit.
Shock-Resistant Transport Protection
Absorb physical impact forces to safeguard internal components.
Fast Order Processing and Dispatch
Accelerate warehouse fulfillment to minimize customer wait times.
Global Logistics and International Delivery
Coordinate worldwide shipping channels for seamless cross-border transport.
Deploy this XBR-SFP10G1290-40-I 10G SFP+ module by hot-swapping it into compatible switch ports and connecting LC fiber cables for immediate 10G links. It is widely used in WDM ring topologies, metro edge backhaul networks, and campus capacity expansions to ensure efficient, long-distance data transmission across challenging operational environments.
XBR-SFP10G1290-40-I Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal XBR-SFP10G1290-40-I module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
A:
Yes, provided that your CWDM MUX/DEMUX has a dedicated 1290nm channel. The 1290nm module can run alongside 1310nm and 1330nm CWDM channels on the same single-mode fiber pair because each channel uses a different wavelength. Use a matching 1290nm CWDM module at the far end, and check the total link loss, including fiber, connectors, splices, and MUX/DEMUX insertion loss. By
admin on
2026-04-04
A:
No. It needs to connect to the matching 1290nm channel port. Connecting it to a different wavelength port may cause no link or unstable transmission. By
admin on
2026-01-22
A:
Yes, this LS-CW2910-40I module supports up to 40km transmission over single-mode fiber. The actual supported distance can vary depending on fiber loss, connector condition, and splice quality. By
admin on
2025-08-15
A:
Yes. This industrial-grade 10G SFP+ CWDM module is suitable for LTE backhaul where a 10Gbps optical uplink is needed over single-mode fiber. It supports transmission up to 40 km and is a practical choice for outdoor LTE cabinets or remote sites with temperatures from -40°C to +85°C. Please make sure both connected devices support 10G SFP+ optics and that the CWDM wavelength matches the MUX/DEMUX channel. By
admin on
2025-05-10
Our aggregation layer accepted the modules immediately upon hot-plugging. DOM telemetry maps straight into our SNMP monitoring server with accurate real-time voltage and temperature readings. Highly recommended for multi-vendor network setups.
Please write comments with more than three
character.
482884
436392
T***s
Israel
Verified
Purchase
5 .0
2026-04-29
This transceiver module worked well for our base-station backhaul test setup. We needed 1290nm CWDM to fit the wavelength plan, plus wide-temperature operation for an equipment shelter with limited climate control. TX/RX power values in DOM were consistent across the modules we installed.
Please write comments with more than three
character.
482884
436388
V***a
Morocco
Verified
Purchase
5 .0
2026-03-14
Our team evaluated this industrial 10G SFP+ CWDM transceiver for an outdoor utility communications network. The important requirements were the 1290nm wavelength, Duplex LC interface, 40km reach, digital optical monitoring, and operation from -40°C to 85°C. We ran continuous traffic, link-flap tests, and environmental cabinet checks, and the modules remained stable with no unexpected alarms. The diagnostic values were readable through our standard management workflow, including temperature, voltage, laser bias, transmit power, and receive power. It is a strong fit for industrial switching, remote cabinets, and long-distance 10GbE uplinks.
Please write comments with more than three
character.
482884
436385
S***s
Turkey
Verified
Purchase
5 .0
2025-12-30
We used this LS-CW2910-40I 1290nm CWDM SFP+ in a small business park network with roughly 31km of single-mode fiber. The 10G link has stayed stable through normal daytime heat and overnight temperature swings. DOM monitoring is useful for checking optical power before a minor loss becomes a service call.
Please write comments with more than three
character.
482884
436387
E***y
Bangladesh
Verified
Purchase
4 .0
2025-12-12
The modules were exactly as ordered and worked well over our single-mode fiber link. Customs clearance added a short delay, but the seller’s packing protected the shipment well.
Please write comments with more than three
character.
482884
436396
V***a
Denmark
Verified
Purchase
5 .0
2025-10-15
Used in a multi-site office rollout with single-mode fiber between warehouses. The module negotiated cleanly at 10G and showed reasonable receive levels on both ends. No errors after several weeks of traffic, backups, and video surveillance uplink.
Please write comments with more than three
character.
482884
436390
C***n
Macao
Verified
Purchase
5 .0
2025-09-26
We installed a matched pair on a fiber route connecting two server rooms through a metropolitan dark-fiber segment. Total optical distance was 37.4km, and the path included multiple LC patch points, so DOM visibility was a must. The modules held a clean 10G connection during backup windows and high-throughput replication tests, while receive levels stayed comfortably above the sensitivity threshold. We also moved one optic through several compatible SFP+ ports during commissioning; it was recognized normally each time after standard configuration. Great field result for a 40km single-mode CWDM deployment.
Please write comments with more than three
character.
482884
436386
W***s
Belarus
Verified
Purchase
5 .0
2025-08-21
We tested this 10G CWDM 1290nm optic alongside other wavelength channels in the same fiber plant. It fit our channel plan and maintained a stable link with no packet loss during the burn-in period. DOM temperature and optical-power readings were easy to verify.
Please write comments with more than three
character.
482884
436391
T***z
Lithuania
Verified
Purchase
5 .0
2025-04-16
Excellent wavelength accuracy on 18-channel CWDM Mux/Demux. Channel pass-through on our passive 1290nm optical multiplexer was spot on. Insertion loss stayed well within nominal thresholds, and we verified full 10Gbps line-rate throughput without frame loss.
Please write comments with more than three
character.
482884
436393
Q***t
Hungary
Verified
Purchase
5 .0
2025-03-08
We keep these 10G 1290nm CWDM 40km SFP+ transceivers as spares for customer fiber rings. They are compact, the label information is easy to read, and DOM makes acceptance testing faster. Good fit for technicians working with CWDM channels in the field.
Germany · English · EUR
