Designed for next-generation telecommunications, the H3C DWDM-SFP10G-50.12-80-I Compatible LINK-PP module is an industrial-rated 10G DWDM SFP+ optical transceiver engineered for extreme thermal settings. Combining an electro-absorption modulated laser with an avalanche photodiode, it powers 10.7Gbps line rates over 80km single-mode fiber. Operating on the 1550.11nm channel, it guarantees low-dispersion optical performance across long-distance deployments.
H3C Part Number
DWDM-SFP10G-50.12-80-I
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1550.11nm
Max Cable Distance
80km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-23dBm
DDM/DOM
Supported
Operating Temperature Range
-40 to 85°C
Protocols
10GBASE-ZR/ZW, SDH STM64, SFF-8431, SFF-8472
Key Features of H3C DWDM-SFP10G-50.12-80-I Compatible LINK-PP 10G DWDM SFP+
Delivering exceptional spectral purity, the DWDM-SFP10G-50.12-80-I serves as an advanced 10G SFP+ optical module. It provides full compliance with 10GBASE-ZR and 10GBASE-ZW protocols, ensuring pristine packet handling across high-speed enterprise backbones and DWDM transmission backplanes.
This 10G CWDM SFP+ module contains a high-performance EML laser transmitter, a sensitive PIN photodiode with a TIA amplifier, and an intelligent MCU control unit that work together to ensure stable optical output and consistent transmission performance.
DWDM-SFP10G-50.12-80-I: 10G Connectivity for 5G Networks
Tailored to satisfy the rigorous throughput and latency criteria of 5G networks, the DWDM-SFP10G-50.12-80-I delivers robust 10G connectivity. It bridges midhaul and backhaul nodes seamlessly, handling massive concurrent mobile data traffic without jitter or dropped frames.
DWDM-SFP10G-50.12-80-I Module with DWDM Technology for Fiber Efficiency
Featuring 100GHz ITU-spaced DWDM technology, the DWDM-SFP10G-50.12-80-I drastically multiplies data density across single-mode fiber routes. This spectral multiplexing approach enables network architects to expand total link capacity exponentially without the costly disruption of laying supplementary dark fiber.
DWDM-SFP10G-50.12-80-I Module with 1550.11nm Wavelength
Engineered around the 1550.11nm wavelength (ITU Channel 34), the DWDM-SFP10G-50.12-80-I provides immaculate channel stabilization. Its narrow spectral emission combats signal degradation, delivering clean optical signal-to-noise ratios even in heavily congested dense wavelength division multiplexing link environments.
Supporting direct 80km transmission reaches over standard SMF, the DWDM-SFP10G-50.12-80-I module reduces intermediate amplification hardware expenses. Its sensitive APD receiver catches ultra-faint optical signals down to -23dBm, ensuring flawless data reception across extensive inter-city spans.
DWDM-SFP10G-50.12-80-I Module with Duplex LC Interface
Outfitted with a standard duplex LC connector, the DWDM-SFP10G-50.12-80-I enables swift, foolproof cabling integration. Its precision ferrule alignment guarantees minimal insertion loss and dependable optical return loss, resisting mechanical strain within compact, high-density patch panels.
DWDM-SFP10G-50.12-80-I Module with DOM for Real-Time Monitoring
Adhering to the SFF-8472 standard, the DWDM-SFP10G-50.12-80-I delivers real-time DOM telemetry directly to host systems. Network administrators can query live operating metrics, including module temperature, internal voltage, APD receive power, and transmitter bias, to identify faults proactively.
Every production-grade DWDM-SFP10G-50.12-80-I undergoes a comprehensive testing regimen before release. Multi-stage electrical and optical evaluations verify that each transceiver meets zero-defect criteria for high-stakes enterprise and carrier networking.
DWDM-SFP10G-50.12-80-I Quality Certifications
Validated for international compliance, the DWDM-SFP10G-50.12-80-I carries official CE, FCC, UKCA, UL, REACH, and RoHS certifications, strictly adhering to global Class I laser radiation safety limits.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DWDM-SFP10G-50.12-80-I Certified for Reliable Host-Device Compatibility
Built to comply with SFP+ MSA standards, the DWDM-SFP10G-50.12-80-I delivers verified host interoperability. It interfaces smoothly with premier switches, edge routers, and optical line terminals across diverse vendor ecosystems.
Cutting-edge automated test procedures assess every optical sub-assembly. These exhaustive screening protocols ensure our SFP+ optics deliver unwavering signal consistency across demanding continuous operating environments.
Optical Spectrum Test
Advanced spectrum analyzers verify that the 1550.11nm peak maintains precise side-mode suppression above 30dB.
Eye Pattern Test
Precise mask tests check the transmitted optical waveform, guaranteeing wide eye opening and negligible jitter.
Bit Error Rate Test
Stressful PRBS 2³¹-1 pattern evaluations confirm consistent BER rates meeting the strict ≤1×10⁻¹² industry standard.
Temperature Test
Rigorous environmental profiling verifies uncompromised optical and electrical stability across extreme -40°C to +85°C conditions.
Product Shipping for H3C DWDM-SFP10G-50.12-80-I Compatible LINK-PP 10G SFP+
Shipments of the H3C DWDM-SFP10G-50.12-80-I Compatible LINK-PP 10G SFP+ feature multi-layered protection protocols. Our logistics operations ensure prompt, damage-free global transit to your delivery destination.
Installing the H3C DWDM-SFP10G-50.12-80-I Compatible LINK-PP 10G SFP+ is completely straightforward. Insert the module into an active SFP+ slot until the bail latch firmly engages, connect your duplex LC single-mode fiber patch cord, and enjoy immediate high-speed optical synchronization.
DWDM-SFP10G-50.12-80-I Technical Support
LINK-PP provides professional technical support, including pre-sales consultation, compatibility verification, and post-deployment troubleshooting to ensure smooth network operation.
Pre-Sales Technical Consultation
Professional technical guidance to help customers select the most suitable DWDM-SFP10G-50.12-80-I modules based on network architecture and application requirements.
Compatibility Verification Support
Compatibility checks and validation to ensure seamless operation with Cisco switches and other supported networking platforms.
Deployment & Installation Assistance
Step-by-step support for installation, configuration, and initial deployment to ensure stable and correct operation.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle to ensure reliable performance in enterprise and carrier-grade networks.
We provide competitive volume discounts at 20, 50, 100, and 500+ unit tiers, including mixed ITU C-band channel orders. Orders of 80+ LS-DW3410-80I modules ship from factory stock within 1–2 business days via DHL/UPS Express, reaching European destinations in 3–4 business days. by LINK-PP Technical Support
Use standard OS2 (9/125µm G.652.D) single-mode fiber with Duplex LC/UPC connectors. Since the cooled EML transmits at -1 to +5dBm and the APD receiver overload is -6dBm (sensitivity -23dBm), install a 10dB–15dB LC attenuator for short spans or back-to-back lab testing so RX power stays safely between -10dBm and -20dBm. by LINK-PP Technical Support
Yes. The LINK-PP LS-DW3410-80I operates on the standard 100GHz ITU-T Grid Channel C34 (1550.11nm) and supports 10GBASE-ZR/ZW and SDH STM-64 (10.7Gbps). Just specify Dell or Extreme compatibility when ordering—we program the EEPROM to match each host platform with full SFF-8472 DOM/DDM telemetry. by LINK-PP Technical Support
Yes. The LS-DW3410-80I is specifically engineered with an integrated TEC (thermoelectric cooler) on the EML transmitter and tested in thermal chambers from -40°C to +85°C, preventing wavelength drift across adjacent 100GHz ITU channels in unheated outdoor cabinets and 5G base stations. by LINK-PP Technical Support
The LS-DW3410-80I complies with SFF-8431, SFF-8472 (DDM/DOM), IEEE 802.3ae 10GBASE-ZR/ZW, ITU-T G.694.1 100GHz DWDM grid (C34 1550.11nm), and SONET OC-192 / SDH STM-64, as well as RoHS, CE, FCC, and Class 1 laser safety standards. by LINK-PP Technical Support
Canada · English · CAD
