The Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP 10G SFP+ transceiver supports data rates up to 10.7 Gbps over single-mode fiber (SMF) and extends optical links up to 40 km. Operating at a finely tuned DWDM wavelength of 1546.92 nm, it enables high-capacity data transmission.
Ciena Part Number
DWDM-SFP10G-46.92-40-I
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7 Gbps
Wavelength
1546.92nm
Max Cable Distance
40km
Connector
Duplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
PIN
TX Power
-1 to +2dBm
RX Power
-16 to -1dBm
Receiver Sensitivity
<-15.5dBm
Receiver Overload
0.5dBm
Operating Temperature Range
-40 to 85°C
Protocols
SFP+ MSA Compliant, CPRI, eCPRI
Key Features of Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP 10.7G SFP+
Delivering dependable, long-reach 10G connectivity, the Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP 10G SFP+ module integrates DWDM technology, a duplex LC interface, and Digital Optical Monitoring (DOM) feature. These features make it an ideal solution for metropolitan networks, long-haul backbones, DWDM transport systems, and data center interconnects, supporting 10.7 Gbps bandwidth and 40 km reach at 1546.92 nm wavelength.
This modern optical module has an optimized design that includes a high-stability DWDM EML laser, a precise PIN-TIA receiver, and an intelligent MCU-based control system. These components work together to enable consistent and efficient data transmission with outstanding optical integrity.
DWDM-SFP10G-46.92-40-I : 10 Gbps Connectivity for Next-generation Networks
The Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP 10G SFP+ optical module offers 10G data rates and high-speed, low-latency Ethernet performance, making it perfect for enterprises and carriers seeking scalability, dependability, and superior performance.
DWDM-SFP10G-46.92-40-I Module with DWDM Technology Maximizes Fiber Capacity
Harness the full potential of your existing fiber infrastructure. With advanced DWDM multiplexing, the Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP module transmits multiple tightly spaced wavelengths through a single fiber strand, boosting capacity and throughput without costly new cable runs.
DWDM-SFP10G-46.92-40-I Module with 1546.92nm Wavelength
By utilizing a 1546.92 nm DWDM channel, this DWDM SFP+ module achieves high channel density and seamless compatibility with DWDM units and optical amplifiers, ensuring smooth integration into modern transmission systems.
Capable of transmitting 10.7Gbps signals over distances reaching 40km on single-mode fiber, the Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP 10G SFP+ transceiver module is ideal for metro aggregation links, regional networks, and backbone infrastructures that demand consistent long-haul performance.
DWDM-SFP10G-46.92-40-I Module with Duplex LC Interface
This Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP module's standard duplex LC connector enables effortless installation, quick maintenance, and reliable compatibility across fiber connectivity systems.
DWDM-SFP10G-46.92-40-I Module with DOM for Real-Time Monitoring
The integrated DOM feature enables real-time diagnostics for critical parameters like temperature, voltage, and optical power, ensuring optimal performance through proactive management.
Manufactured under ISO 9001-certified processes, LINK-PP’s optical modules meet stringent international standards, including CE, RoHS, and FCC, which guarantee quality, safety, and long-term reliability.
Every LINK-PP module undergoes an exhaustive validation process to ensure operational stability and performance excellence across all deployment environments.
DWDM-SFP10G-46.92-40-I Quality Certifications
Built in compliance with ISO 9001, CE, RoHS, and FCC standards, the LINK-PP module embodies LINK-PP’s commitment to dependable, standards-driven quality.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
DWDM-SFP10G-46.92-40-I Certified for Reliable Host-Device Compatibility
Certified for seamless interoperability with LINK-PP platforms, this Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP module minimizes integration challenges, ensuring reliable connectivity across compliant network devices.
Every LINK-PP unit is subjected to advanced testing to guarantee consistent performance under demanding conditions. For further information, visit the LINK-PP Test Support Center.
Optical Spectrum Test
Verifies exact wavelength alignment to guarantee transmission purity.
Eye Pattern Test
Analyzes the integrity of digital waveforms for optimized, jitter-free communication.
Bit Error Rate Test
Measures signal quality to maintain outstanding data performance over extended fiber spans.
Temperature Test
Validates thermal resilience, ensuring stable functionality under both demanding and variable situations.
Product Shipping for Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP 10.7G SFP+
LINK-PP ensures secure, efficient global shipping with logistics optimized for reliability and safety.
Anti-Static Protective Packaging
Advanced, ESD-safe materials protect optical modules at every stage of handling.
Shock-Resistant Transport Protection
Shock absorption prevents vibrations and impacts during transit.
Fast Order Processing and Dispatch
Streamlined fulfillment ensures a quick order turnaround and timely delivery.
The Ciena DWDM-SFP10G-46.92-40-I Compatible LINK-PP 10G SFP+ optical module provides robust 10.7Gbps performance over 40km for use in DWDM transport systems, metro aggregation, enterprise expansion, and data center interconnections. It is designed for reliable, long-reach optical networking.
DWDM-SFP10G-46.92-40-I Technical Support
LINK-PP provides professional technical support, including pre-sales consultation, compatibility verification, and post-deployment troubleshooting to ensure smooth network operation.
Pre-Sales Technical Consultation
Professional technical guidance to help customers select the most suitable DWDM-SFP10G-46.92-40-I modules based on network architecture and application requirements.
Compatibility Verification Support
Compatibility checks and validation to ensure seamless operation with Cisco switches and other supported networking platforms.
Deployment & Installation Assistance
Step-by-step support for installation, configuration, and initial deployment to ensure stable and correct operation.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle to ensure reliable performance in enterprise and carrier-grade networks.
A:
Because the EML transmitter output power ranges from -1 to +2 dBm and receiver overload threshold is 0.5 dBm, connecting the transceiver directly on a short patch cord without attenuation risks saturating or damaging the PIN receiver. We recommend using a minimum 5dB to 10dB fixed optical attenuator during benchtop testing to keep RX power safely within the recommended operational range of -16 to -1 dBm. By
admin on
2026-06-27
A:
The integrated EML (Electro-absorption Modulated Laser) transmitter on 1546.92nm offers superior chromatic dispersion tolerance compared to standard DFB lasers. For standard G.652 single-mode fiber runs up to 40km at 10G rates (typical dispersion ~800 ps/nm at 1550nm), no external Dispersion Compensation Module (DCM) is required. If extending spans beyond 40km with optical amplifiers (EDFA), dispersion compensation planning should be applied. By
admin on
2026-03-03
A:
The LS-DW3810-40I strictly adheres to SFF-8472 SFP+ MSA standards for DDM/DOM memory mapping. Internal sensors measure real-time parameters—including TX power, RX optical power, laser bias current, module operating temperature, and supply voltage. These values are readable standardly across Arista EOS, Juniper Junos, Mikrotik RouterOS, and Dell FTOS via standard CLI commands. By
admin on
2025-12-27
A:
Yes, the module supports data rates up to 10.7 Gbps and is fully compliant with CPRI (Option 7/8 up to 9.8304 Gbps) and eCPRI standards. Combined with its industrial temperature range (-40°C to 85°C), it is specifically engineered for outdoor base station fronthaul and harsh radio site deployments. By
admin on
2025-07-13
A:
Yes, it can function over a direct point-to-point single-mode fiber (SMF) link without a MUX, provided both ends use identical DWDM optics tuned to compatible wavelengths or broadband receivers. However, to utilize its precise 100GHz ITU grid C38 (1546.92nm) channel spacing properly and combine multiple signals onto a single fiber pair, it is best paired with a dedicated 100GHz C-band DWDM MUX/DEMUX. By
admin on
2024-12-12
Replaced legacy OEM optics in our remote substation automation network with these LINK-PP industrial SFP+ modules. The -40 to +85°C temperature envelope is vital for utility substations. The DDM capability provided immediate verification of optical power levels (-11.2 dBm RX over 27km), making commissioning effortless for our field technicians :-)
Please write comments with more than three
character.
494991
457106
L***z
Romania
Verified
Purchase
5 .0
2026-06-23
Deployed these 10.7 Gbps DWDM optics in an enterprise storage network between main and DR sites. Compatibility across mixed vendor gear—specifically Brocade Fibre Channel switches and Cisco Nexus platforms—was seamless out of the box. DOM data feeds clean telemetry into our Zabbix dashboard, tracking temperature, supply voltage, and optical RX power level. No firmware recoding required, fully compliant with SFP+ MSA specs.
Please write comments with more than three
character.
494991
457103
A***n
Japan
Verified
Purchase
5 .0
2026-03-25
Running C38 1546.92nm on a passive DWDM MUX. The EML transmitter outputs steady optical signal, and PIN receiver sensitivity handles attenuation with plenty of margin =)
Please write comments with more than three
character.
494991
457098
J***l
Turkey
Verified
Purchase
4 .0
2026-01-10
Product performance is excellent on our 30km 10G DWDM link, but the outer shipping box arrived slightly crushed. Optics inside were well protected in ESD foam and worked fine, but packaging could be sturdier.
Please write comments with more than three
character.
494991
457107
D***z
Libyan Arab Jamahiriya
Verified
Purchase
5 .0
2025-08-26
Installed 4 of these LS-DW3810-40I transceivers into our Arista switches for datacenter interconnect. DDM/DOM readings show -2.5 dBm RX power cleanly over 28km single mode fiber. Very impressive stability :-D
Please write comments with more than three
character.
494991
457088
K***n
Denmark
Verified
Purchase
5 .0
2025-07-01
We evaluated several third-party 10G SFP+ DWDM 40km optics for our campus dark fiber network expansion. LINK-PP's LS-DW3810-40I stood out during 72-hour soak testing. The integrated EML transmitter provides superior chromatic dispersion tolerance over long SMF runs compared to standard DFB lasers. Paired with a 16-channel DWDM passive MUX, C38 locked into its slot with zero spectral drift. Optical budget headroom was better than expected at 32km distance :-D
Please write comments with more than three
character.
494991
457081
M***n
Australia
Verified
Purchase
5 .0
2025-04-15
Our network team deployed 12 units of these C38 10G DWDM optics for metro dark fiber ring protection. The LC duplex connection latches firmly, and optical receiver overload protection (0.5dBm max) gave us peace of mind when testing short patch cords without inline attenuators. Flawless bit error rate test (BERT) results across all spans up to 35km.
Please write comments with more than three
character.
494991
457105
H***z
Mexico
Verified
Purchase
5 .0
2025-03-04
As an ISP network engineer, finding reliable industrial-grade optics for unheated roadside enclosures in northern regions is tough. The -40 to 85°C operating temperature rating on these LINK-PP transceivers is genuine. We have two units driving a CPRI link for base station backhaul in an outdoor cabinet. During winter sub-zero drops, optical power stability remained completely flat. DDM telemetry reports laser bias current and housing temp without any glitching. Extremely reliable hardware for critical infrastructure ;)
Please write comments with more than three
character.
494991
457079
E***r
United Arab Emirates
Verified
Purchase
5 .0
2024-11-30
We deployed eight LS-DW3810-40I modules across a 36km single-mode fiber span connecting two municipal data centers. Operating on DWDM Channel 38 (1546.92nm), these transceivers fired up immediately inside our Dell S5248F-ON switches. Real-time DDM/DOM diagnostics registered TX power at +0.5 dBm and RX power at -12.4 dBm, well within the -16 to -1 dBm receiver sensitivity range. The optics have been running 24/7 for three months under heavy traffic load with zero CRC errors. Highly recommended for cost-effective 10G DWDM link deployment.
Please write comments with more than three
character.
494991
457100
H***l
Bulgaria
Verified
Purchase
5 .0
2024-11-18
Needed an industrial grade DWDM SFP+ optic for a harsh roadside cabinet. Temperature swings from -15℃ to 40℃ haven't caused a single drop or framing error on our eCPRI fronthaul link.
Please write comments with more than three
character.
494991
457092
J***r
Australia
Verified
Purchase
5 .0
2024-11-01
Upgraded our high-speed 10G NAS links across a multi-building university campus spanning 22km. Using these 1546.92nm modules on existing SMF cabling allowed us to double our link capacity over DWDM without pulling new fiber lines. Receiver sensitivity of <-15.5dBm gave us plenty of margin even through two patch panels and optical splitters. Couldn't ask for a better price-to-performance ratio =D
Canada · English · CAD
