Generic SFP-10G45-BX80 Compatible LINK-PP operates as a single-fiber BiDi SFP+ transceiver utilizing a 1490nm-TX/1550nm-RX wavelength pair to achieve simultaneous bidirectional 10Gbps data transmission over a single strand of single-mode fiber up to an 80km reach via a simplex LC/UPC interface with integrated DOM support.
Generic Part Number
SFP-10G45-BX80
Vendor Name
LINK-PP
Form Factor
SFP+
Max Data Rate
10.7Gbps
Wavelength
1490nm-TX/1550nm-RX
Max Cable Distance
80km
Connector
Simplex LC
Media
SMF
Transmitter Type
EML
Receiver Type
APD
TX Power
-1 to +5dBm
RX Power
-23 to -6dBm
Receiver Sensitivity
-22dBm
DOM Support
Yes
Operating Temperature Range
0 to 70°C
Protocols
SFP+ MSA Compliant, CPRI, eCPRI
Key Features of Generic SFP-10G45-BX80 Compatible LINK-PP 10G SFP+
The Generic SFP-10G45-BX80 Compatible LINK-PP SFP+ module optimizes single-fiber networks by combining bidirectional 10Gbps speeds, an 80km transmission range, and real-time diagnostic monitoring over a single optical strand. It integrates 1490nm-TX/1550nm-RX wavelengths and a simplex LC/UPC interface to deliver efficient, long-distance carrier-grade connectivity.
This hot-pluggable optical transceiver complies with SFP+ MSA standards to deliver a steady 10G data rate over single-mode fiber. It serves as a compact, reliable building block for modern, space-constrained data centers and telecom central offices.
SFP-10G45-BX80: 10 Gbps Connectivity for Carrier-Grade Networks
Engineered for demanding metropolitan and regional infrastructure, this module provides the steady 10 Gbps bandwidth required for backhaul and transport networks. Its robust design ensures low-latency data throughput across extensive geographic spans without packet loss.
SFP-10G45-BX80 Module with 1490nm-TX/1550nm-RX Wavelength
By transmitting data at 1490nm and receiving it at 1550nm, this transceiver isolates sending and receiving paths on the exact same fiber strand. This precise WDM configuration prevents signal crosstalk and eliminates the need for a separate return fiber.
Equipped with a powerful transmitter and a highly sensitive receiver, the module maintains link integrity over long-haul distances up to 80km. This extended reach cuts down the number of intermediate optical repeaters and amplification sites needed in the field.
SFP-10G45-BX80 Module with Simplex LC/UPC Interface
Featuring a single-port simplex LC/UPC connector with an ultra-physical contact polish, the module ensures low insertion loss and minimal back-reflection. This BiDi design immediately cuts fiber cabling requirements and patch panel port usage in half.
SFP-10G45-BX80 Module with DOM for Real-Time Monitoring
The integrated Digital Optical Monitoring (DOM) function tracks critical internal parameters like optical output power, receiver sensitivity, laser temperature, and supply voltage. Network administrators can access these diagnostics instantly to catch potential link failures before they happen.
The Generic SFP-10G45-BX80 Compatible LINK-PP module is fully certified under ISO 9001, CE, RoHS, and FCC standards to ensure international compliance, environmental safety, and premium manufacturing quality.
Every module undergoes rigorous optical performance, signal integrity, and environmental stress testing to guarantee flawless 10Gbps transmission over long distances.
SFP-10G45-BX80 Quality Certifications
These global regulatory credentials guarantee that the optical hardware adheres to strict manufacturing laws, environmental restrictions, and electromagnetic interference limits.
This product is in conformity with ISO9001. This system is valid to a company engaging in development, production and supply service of fiber optical products. Please contact us to learn more.
ISO/IEC 27001 is an international standard for managing and processing information security. This standard is jointly developed by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). It sets out requirements for establishing, implementing, maintaining, and continually improving an information security management system (ISMS). Ensuring the confidentiality, integrity, and availability of organizational information assets, obtaining an ISO 27001 certificate means that the enterprise has passed the audit conducted by a certification body, proving that its information security management system has met the requirements of the international standard. Please contact us to learn more.
This product is in conformity with ISO14001.It is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. Please contact us to learn more.
ISO 45001 is a global standard that sets out the requirements for an occupational health and safety management system (OH&SMS).
REACH is a European Union regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals. It came into force on 1st June 2007 and replaced a number of European Directives and Regulations with a single system. The regulation aims to protect human health and environmental safety, maintain and improve the competitiveness of the EU chemical industry, and develop innovative capabilities for non-toxic and harmless compounds to prevent market fragmentation, increase the transparency of the use of chemicals, promote non-animal experiments, and pursue sustainable social development.Please contact us to learn more.
This product meets the applicable requirements of Directive (EU) 2015/863 of RoHS. It restricts the use of 10 hazardous materials in the manufacture of various types of electronic and electrical equipment: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, and four different phthalates. Please contact us to learn more.
This product fully accords with the FCC, which aims to manage the radio wave and magnetic fields more reasonably. Please contact us to learn more.
CB is an international system operated by IECEE. This product is based on IEC standards for testing the safety performance of electrical products. Please contact us to learn more.
This product fully accords with UKCA (UK Conformity Assessed) certificate, which signifies that it meets all relevant quality standards as well as health and safety requirements. Please contact us to learn more.
UL certification is a non-mandatory certification in the United States,mainly testing and certification of product safety performance.Its ultimate purpose is to obtain products with a fairly safe level for the market,and to contribute to ensuring human health and property safety.Please contact us to learn more.
SFP-10G45-BX80 Certified for Reliable Host-Device Compatibility
The module is comprehensively tested and coded to ensure seamless plug-and-play interoperability with mainstream switches, routers, and servers without throwing port errors.
Advanced validation processes safeguard signal integrity and optical stability across every network link. Discover our complete testing protocols through the [Link-PP Test Support Center].
Optical Spectrum Test
Measure central wavelength accuracy to prevent signal crosstalk.
Eye Pattern Test
Analyze signal distortion and measure transmitter jitter margins directly.
Bit Error Rate Test
Confirm zero-loss data integrity during high-throughput stress cycles.
Temperature Test
Maintain stable thermal operation under extreme environmental conditions.
Product Shipping for Generic SFP-10G45-BX80 Compatible LINK-PP 10G SFP+
Secure logistics and efficient handling guarantee prompt global delivery. Every transceiver module arrives safely through optimized supply chain management.
Anti-Static Protective Packaging
Shield vulnerable internal circuits from electrostatic discharge during transit.
Shock-Resistant Transport Protection
Absorb physical impacts to prevent delicate optical alignment shifts.
Fast Order Processing and Dispatch
Speed up handling times to ensure rapid warehouse departure.
Global Logistics and International Delivery
Ship orders reliably to worldwide destinations via trusted carriers.
Simply slide this hot-pluggable module into a switch’s SFP+ slot until it clicks, then connect a simplex LC/UPC single-mode fiber patch cord. It efficiently empowers long-haul telecommunication backhauls and metro Ethernet networks, providing reliable, bidirectional 10Gbps data transport across spans reaching up to 80km.
SFP-10G45-BX80 Technical Support
LINK-PP offers end-to-end technical support, from pre-sales consultation to post-deployment assistance, ensuring smooth integration and reliable network performance.
Pre-Sales Technical Consultation
Professional guidance to help you select the optimal SFP-10G45-BX80 module for your network design and application needs.
Compatibility Verification Support
Validated compatibility with LINK-PP switches and other mainstream networking platforms for seamless deployment.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Review frequently asked questions to understand the specialized optical hardware and real-time monitoring capabilities of this 80km 10G SFP+ transceiver.
At 80km distances, chromatic dispersion degrades signals. An Electro-absorption Modulated Laser (EML) provides lower chirp and higher signal stability over long distances than a Distributed Feedback (DML) laser.
The Avalanche Photodiode (APD) receiver offers significantly higher optical sensitivity compared to standard PIN receivers. This allows the module to reliably decode weak incoming signals after experiencing high attenuation over long distances.
The Digital Optical Monitoring (DOM) interface tracks five critical parameters: optical output power, optical input (receiver) power, internal transceiver temperature, laser bias current, and module supply voltage.
The 80km rating is an architectural estimate based on standard Single-Mode Fiber (SMF) loss. Your actual distance depends on total optical link budget loss (splices, patches, and fiber quality).
A:
Yes, the fully enclosed metal chassis is engineered specifically to minimize EMI and handle tight, adjacent port configurations safely. By
admin on
2026-03-18
A:
This long-haul module utilizes a highly sensitive Avalanche Photodiode (APD) receiver to accurately detect weak signals across high-attenuation single-mode fiber runs. By
Lily6 on
2026-01-04
A:
Absolutely, as long as the remote transceiver uses the exact complementary wavelengths and supports standard 10G signaling over single-mode fiber. By
admin on
2025-11-23
A:
The 80km rating assumes standard fiber attenuation metrics; you must calculate your total link loss budget against the module's specified optical power margin. By
admin on
2025-09-06
A:
The digital diagnostics monitoring (DOM) interface complies fully with SFF-8472, providing real-time telemetry for laser bias, internal temperature, supply voltage, and absolute optical power. By
admin on
2025-07-13
Migrating our legacy campus backbone to a robust 10G topology required optics that could handle significant attenuation across an old fiber plant with multiple mechanical splices. These transceivers provided enough amplification and receiver sensitivity to overcome the high decibel loss on our 60km run. The DOM interface made it easy to dial in the link, showing us exactly how much margin we had left so we could adjust our patch cables accordingly.
Please write comments with more than three
character.
493886
297472
Y***m
Indonesia
Verified
Purchase
5 .0
2026-04-12
For our regional wireless basestation backhaul project, we needed a reliable 10G link that could handle a 67km span without intermediate regeneration sites. These 1490nm-TX/1550nm-RX modules provided the exact optical power budget required. The simplex single-mode fiber configuration allowed us to leave the second fiber strand open for future redundancy or a separate dedicated link. No frame loss or latency spikes were observed during peak traffic simulation testing.
Please write comments with more than three
character.
493886
297471
X***h
Hungary
Verified
Purchase
5 .0
2026-03-26
In our municipal metro aggregation network, fiber strand availability is always a constraint. Moving from dual-fiber optics to these 10G SFP+ BiDi 80km simplex modules effectively doubled our infrastructure capacity overnight. The Simplex LC/UPC interface ensures a tight, repeatable physical connection. We ran eye pattern captures on the transmitter side, and the optical eye opening shows excellent margin with no jitter issues or signal distortion, even when operating near the thermal limits of our top-of-rack switches.
Please write comments with more than three
character.
493886
297470
L***y
Belgium
Verified
Purchase
5 .0
2026-02-18
The 1490nm/1550nm wavelength separation is incredibly clean, showing no signs of internal cross-talk during our long-distance stress tests. We ran continuous PRBS streams over our 68km fiber plant and observed zero frame loss or latency spikes. It is refreshing to get high-spec long-haul optics that perform precisely as advertised.
Please write comments with more than three
character.
493886
297462
S***y
Denmark
Verified
Purchase
5 .0
2025-10-29
Straightforward standard compliance is exactly what we look for when selecting third-party optics for our mixed environment. These modules interoperate flawlessly across our multi-vendor distribution switches without throwing any unverified hardware warnings. It makes inventory management significantly easier for our team.
Please write comments with more than three
character.
493886
297469
K***e
Australia
Verified
Purchase
5 .0
2025-10-12
Our engineering team is migrating our regional ring to single-strand 10G connections to free up capacity for future expansion. These Simplex LC modules are keeping our infrastructure budget well under control while delivering flawless uptime. Delivery was fast and the technical specifications match our deployment requirements exactly.
Please write comments with more than three
character.
493886
297463
Q***e
Belarus
Verified
Purchase
5 .0
2025-08-31
The optical spectrum looks incredibly sharp and narrow on our lab analyzer, which is exactly what you want for an 80km SFP module. The 1490nm transmit and 1550nm receive paths maintain precise isolation even under synthetic full-duplex load testing. These are engineered properly and build quality feels like it will last for years.
Please write comments with more than three
character.
493886
297461
I***s
Argentina
Verified
Purchase
5 .0
2025-07-30
Deployed these in our central office for metro Ethernet aggregation and the fiber savings are already paying off. The simplex LC interface snaps in perfectly and line-rate traffic has been rock solid for three weeks straight under heavy production loads. If you are constrained by physical fiber strands, this 80km kit is a no-brainer.
Please write comments with more than three
character.
493886
297464
M***y
Bulgaria
Verified
Purchase
5 .0
2025-04-15
Standard 10G SFP+ form factor fits snugly into our aggregation cages without forcing the mechanical release tab. The integrated DDM power metrics match our standalone optical power meter readouts down to the fraction of a decibel. These are definitely going on our standard bill of materials for upcoming data center interconnect projects.
Please write comments with more than three
character.
493886
297467
A***l
Brunei Darussalam
Verified
Purchase
5 .0
2024-04-16
I was provided with fantastic, friendly, and Fast service. I would definitely recommend l-p.com to anyone who also wants to buy Optics Transceiver Modules
Please write comments with more than three
character.
493886
297448
S***d
United States
Verified
Purchase
5 .0
2024-01-26
My experience with LINK-PP is the best. Everytime I need something this is the first place I search. It is so easy to do business with you and to find what I need without the hassle.
Canada · English · CAD
